Originally Posted by Artikbot
PROGRESS HAS BEEN MADE!!
BTW magnets won't affect nothing as long as they are 3-4cm apart from your HDD
I used door magnets to hold my wooden case's side panel on place...
Magnets shouldn't effect me what so ever as I am using an SSD
Anyway, spent basically all day working on it today (I didn't start till like 12:30 but worked on it till like 7).
First off, squaring it up! I sandwiched the 3 pieces together and filed away until they were all level and square, that took a while!!
Next, onto the holes for piece 2, I put the now identical (except for the holes, yet...) piece 2 on top of piece 1 (containing the holes) and drilled them so they are in the same position.
Then I marked out the wholes to drill for the fan to breathe and punched and drilled them, followed by a sand, polish and test.
Onto the SSD mounting, thank you OCZ for also putting screw holes on the bottom of the SSD or this would have been a lot harder, these screw holes are countersunk so you cant really see them
I will continue on it tomorrow
Now for teh pics
P.S I don't have the best lighting so the colours look a bit funny.