[Online] 600 Series Firmware Modifier - Version: 0.7

Modifying your firmware may void your warranty.
I am not responsible for any damages that may occur.
Use at your own risk. If something looks off do not use it.

Version: 0.1
1. First public version online for testing.

Update: Version: 0.2
1. Now shows default clock, boost clock, and max clock.
2. Cleaned up the code a bit and fixed some server side warnings.

Update: Version: 0.3
1. Fixed checksum issue with negative values.
2. Added file naming box next to download button.

Update: version: 0.4
1. Added support for 660 non ti "power target" values.
2. Added support for 680 "power target" values.
3. Fixed "Replace Max Clock" description.

Update: version: 0.5
1. Added option to change the default boost clock by up to 52MHz.
2. Added support for 690 "power target" values.
3. Fixed "power target" showing on unsupported firmware and corrupting the firmware with invalid data.
4. You can now remodify firmware that has been modified by this tool.
5. Added default clock, boost clock, and max clock read out of the modified firmware on the review and download page.

Update: version: 0.6
1. Replaced "Replace Max Clock and "Boost Clock" with "Max Clock" (Allows up to change the max boost clock by up to 52MHz)
2. Fixed reading voltage table with 680 firmware.

Update: version: 0.7
1. Fixed checksum fix - (Corrected wrong variable that was messed up since version 0.3)
2. Added string length check. (Checks the original firmware with the modified version to make sure the size is the same, if not you will get a error message and will not be able to download the modified firmware)
3. Added modified firmware check. (If you attempt to use firmware modified with the tool once before you will get a error message telling you to use the original)

Version: 0.6
...