Originally Posted by Rittzy
Looking brill mate
Originally Posted by MaDeuce50
Awesome work. Thinking about painting my switch now. Subscribed. I'm curious where you're going to mount that big ass 400mm res
Tell me if you do, I could give you quite a few tips. What I'm actually
doing right now is fitting the rad in. I've had to do some sanding already to make it fit, but it'll work. I'll try to post some pics when I get home tonight if I remember.
Edit: Ok! Got some pics.
These are minor issues, but anyway...
will use holes that were pre-drilled. They were meant for a motherboard w/ two cpu's, but it doesn't matter.
I rubbed a bit of paint off by spinning the res "holder" in it's place.
I'm just gonna put a dab of paint on the case, but I sanded the corners off the "holder" so It wouldn't happen again.
When I put in the hard drive cage, part of the fan assembly collides with the "holder".
So I sanded that down just enough...
There's the problems I've ran into so far.
Edit: Also, I drilled a hold into the side of the drive cage's "fan holder" so the cable's will look a bit nicer.Edited by Gen Ross - 12/29/12 at 10:17am