Overclock.net › Forums › Components › Memory › ram oc opinion needed
New Posts  All Forums:Forum Nav:

ram oc opinion needed

post #1 of 4
Thread Starter 
i,ve got 16 gigs of corair vengeance- CMZ8GX3M2A1600C9B OVERCLOCKED TO 1.64VOLTS 2133MHZ AND TIMINGS AT 12-12-12-32, DID MEMTEST AND EVERYTHING WAS FINE , NOW MY LAST OC ON THIS SET OF RAM WAS 11-11-11-36 AT 1800MHZ AT 1.5V , I HAVENT SEEN A BIG DIFFERENCE AND FROM WHAT I,VE READ THERES ALOT OF DISCUSSION ON JUST WHATS TO BE GAINED BY OC,ING RAM,, ANY INPUT ON WHICH TIMINGS I SHOULD GO WITH OR BACK THINGS OFF TO 1600MHZ 9-9-9-27,
post #2 of 4
If your memory is ver 4.xx or 5.xx then you could try lowering CAS latency (first timing) by one or two values.
post #3 of 4
Thread Starter 
will give it a go
Edited by Rabid1 - 1/4/13 at 2:03pm
post #4 of 4
Thread Starter 
thx, i lower cas to 11 and noticed a difference, think i may have found a sweet spot
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › ram oc opinion needed