Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › Failed Alienware now with BeastModeON - mATX watercooled build.
New Posts  All Forums:Forum Nav:

Failed Alienware now with BeastModeON - mATX watercooled build. - Page 7

post #61 of 63
Thread Starter 
Need a hand with one thing though, I need to find a cathode inverter for my frozen q bay reservoir. Any idea what is a good inverter that would work ?
post #62 of 63
Quote:
...I will update the system when I have all the sleeving and modding done and it looks nice and neat


...speaking of modding, some interesting approaches here:

http://redharbinger.com/forums/useralbums/
post #63 of 63
Thread Starter 
So sucky, time is such a problem and I am lacking the time to get on and finish all the modding and gaming on my PC XD Will have to get my mate over so I can have some proper gaming time haha!

After playing with the corsair ax1200i, it is useless in comparison to the normal ax1200. My suggestion to anyone looking that reads this is do not buy one. The software is buggy and isn't reading my gpu's properly most of the time. I have some work to get it all working right. Time to try some sleeving though smile.gif



at 4.95ghz at a vcore of 1.495 my temps never get above 65 degrees on all six cores which is good considering my rad setup.

The Graphics cards clock at 135% power and an offset of +140 and a memory clock I can't remember and never break 35 degrees

The second GPU is a bit higher in temps because I didn't reapply the paste when I pulled it apart the second time to rearrange a pad. Dam, 7 degrees difference. But the first gpu sits roughly at 30 degrees on max load.

My trident x ram is sitting at 2507 mhz roughly. or slightly lower since I played with my multiplier, but everything is stable and I have done some gaming on this including a good 5 hour session which yielded frames above 150 fps in most fight scenes on crysis 2. Game looks incredible!

Need to check the latest drivers and do a new 3D mark test to see what my scores are
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › Failed Alienware now with BeastModeON - mATX watercooled build.