i am seeming to have a fairly uncommon issue( concluded after scouring the inter webs looking for someone with same issue). i am trying to install the p8z77-i into the stand off that are wielded into the mobo tray of the Bit fenix Prodigy case. please tell me i am not the only one having this issue. the issue seems to be the nuts that are holding the digi vrm heat-sink in place and onto the board itself are obstucting the standoffs that are a part of the mobo tray, and this seems to be only on the side of the board with the nuts. i don't want to damage my board, and damage my case, nor mod either of them, but i have a dremmel and know how to use it. so before i need to do something like that someone please help me!!!!!!
post #1 of 10
1/7/13 at 10:35pm