/me walks in grinning like an idiot.
All assembled, OS installed, just getting it all setup how i like it.
29c at idle, 41c @ load with 2 instances of Prime.
Also, when i changed some BIOS settings then hit F10 (save and exit) the PC totally shuts off, and then boots back up. Is this normal? My old rig would just beep and restart after applying BIOS changes.
The settings in question that i changed were:
The memory voltage. I changed it from [AUTO] to [2.1v]
The memory timings. I changed them from [AUTO] to 4-4-4-12-30. at auto they were 5-5-5-15-42.
After booting up, it did NOT reset any of my changes, and booted into windows without trouble. It just freaked me out a bit.
Got some photos of different points during assembly. Will post them up later