Overclock.net › Forums › Intel › Intel CPUs › this is going to sound daft
New Posts  All Forums:Forum Nav:

this is going to sound daft

post #1 of 14
Thread Starter 
smile.gif
post #2 of 14
Please go and read the TOS.
(terms of service), Thank you.
post #3 of 14

When you switch to the Offset, you have to know what offset voltage you're going to use.  There's some simple math involved because it's a calculation based on your VID - and each multiplier has its own VID.  The positive offset is adding to the VID, and the negative is subtracting from it.  There's a little bit more to it than that, but this is the general idea of it.

 

The time to figure out what Offset voltage you're going to use is while using the Manual voltage.  This is when you will be able to do the math, and then you go from there.

 

 

Quote:
Originally Posted by Yoneda View Post

Please go and read the TOS.
(terms of service), Thank you.

 

?

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #4 of 14

What just happened?

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #5 of 14
Quote:
Originally Posted by TwoCables View Post

When you switch to the Offset, you have to know what offset voltage you're going to use.  There's some simple math involved because it's a calculation based on your VID - and each multiplier has its own VID.  The positive offset is adding to the VID, and the negative is subtracting from it.  There's a little bit more to it than that, but this is the general idea of it.

The time to figure out what Offset voltage you're going to use is while using the Manual voltage.  This is when you will be able to do the math, and then you go from there.



?

wut?
All I see that he posted is a smiley face. I take it this is just me... oops.
post #6 of 14
Quote:
Originally Posted by Yoneda View Post


wut?
All I see that he posted is a smiley face. I take it this is just me... oops.

 

He was asking a question about setting an Offset voltage, kind of about how it works.  Why did you tell him to go read the ToS?

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #7 of 14
Quote:
Originally Posted by TwoCables View Post

He was asking a question about setting an Offset voltage, kind of about how it works.  Why did you tell him to go read the ToS?

He might be talking about the smiley face. It appears the OP removed his original post while you were typing.

cg
Solo III
(18 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 2500K | 4.4Ghz ASRock | P67 Extreme4 EVGA | GTX 560 Ti  EVGA | GTS 250 | Physx 
RAMHard DriveHard DriveOptical Drive
G.Skill | Sniper | 4*4 Crucial | C300 | 128GB WD | Black | 500GB LG | Bluray 
CoolingOSMonitorMonitor
Xigmatek Gaia | Push/Pull W7 | Professional | 64bit LG | IPS | 23" | E2370V-BF Dell | LED | 23" | 1080p 
MonitorKeyboardPowerCase
Asus | 19"  DasKeyboard | MX Browns Corsair | AX750 COOLER MASTER | RC-692 
MouseMouse Pad
Logitech | M510 steelseries 
  hide details  
Reply
Solo III
(18 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 2500K | 4.4Ghz ASRock | P67 Extreme4 EVGA | GTX 560 Ti  EVGA | GTS 250 | Physx 
RAMHard DriveHard DriveOptical Drive
G.Skill | Sniper | 4*4 Crucial | C300 | 128GB WD | Black | 500GB LG | Bluray 
CoolingOSMonitorMonitor
Xigmatek Gaia | Push/Pull W7 | Professional | 64bit LG | IPS | 23" | E2370V-BF Dell | LED | 23" | 1080p 
MonitorKeyboardPowerCase
Asus | 19"  DasKeyboard | MX Browns Corsair | AX750 COOLER MASTER | RC-692 
MouseMouse Pad
Logitech | M510 steelseries 
  hide details  
Reply
post #8 of 14
Quote:
Originally Posted by TwoCables View Post

He was asking a question about setting an Offset voltage, kind of about how it works.  Why did you tell him to go read the ToS?

It looked like a troll thread>.<<br /> All I see is:

"This is going to sound daft"
"smile.gif"
post #9 of 14
Quote:
Originally Posted by exnihilo View Post

He might be talking about the smiley face. It appears the OP removed his original post while you were typing.

cg

So it's not just me?
post #10 of 14
Thread Starter 
sorry I thought I had posted in the wrong place. I have looked at images/screen grabs of bios' and I am confused as people are setting their CPU voltages manually to eg 1.265 then in the next image is the same settings/options but this time they have selected Offset mode and have set an offset of eg .045 Am I right to think once you find a stable voltage, switching to offset mode is going to still keep the 1.265 voltage then apply the offset you decide ? I hope I am making sense thx in advance
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › this is going to sound daft