post #11 of 11
Quote:
Originally Posted by lmclean12 View Post



Thats a picture of the full loop.

Yeah the card does straighten up when i push under the 90 deg, so do i just need a longer piece of tubing?

That is what I thought. Your tube down to that bottom rad is too short and is pulling down on the card. Re-cut that tube length to be one or two cm longer and it should stop that sag. it is OK to have that tube be a tad on the long side since both of those rotary fittings can simply turn to deal with the tube.

let us know if that fixes your problem.