Originally Posted by Vikhr
Only thing I don't like is the cable, it manages to catch on the edge of my Talent constantly and it creates more friction whenever it rubs against the mouse pad. Would prefer a cable that was either a bit stiffer or one that didn't have a ton of memory.
You could heat up some water to place the cable in it for a short time. Use your fingers to slide the length of the cable to straighten it.
I heated the water just before boiling, then turned the stove off. I put the cable in the water after. Don't put in the USB part in the water and don't let the mouse touch the water or pot. Also don't let the cable touch the hot pot where the water isn't. I placed it in for a short time, when that didn't work I put it in a little longer, I continued increasing the time until it started to straighten. You may have to heat the water hotter. Just start low and increase until it works. Just don't make it to hot... I let the mouse dry for a day or two.
My cable is now straight and very flexible. I would like the cable to be a stiffer though, but it is straight.Edited by popups - 8/6/13 at 6:22pm