post #1 of 1
Thread Starter 
So as i just get my new part in the mail im ready to fire up my system, but in the picture below you can see the fillport on my lap, Well my fill port in general starts leaking


Fillport to res is here




I am using a i think a click clamp, where it hurts to click down, just like on the fill line. So basically before this tubing (on the funnel, pic 1) is using 1/2" tubing, ok so that leaked in the whole system so swtiched to 7/16" and said F*** it to the clicky clamps and bought

http://www.ebay.com/itm/380551256221?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 9 of these,

tubing is http://www.ebay.com/itm/251214787673?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

are the 90 degrees http://www.ebay.com/itm/251071223962?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

anti-kink

http://www.ebay.com/itm/110996351758?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

http://www.ebay.com/itm/Koolance-Coolant-Fill-Port-Drain-Valve-G1-4-Threaded-PRT-XGK-/280934273761?pt=US_Water_Cooling&hash=item4168fcd2e1 x2

so after all of that was bought, i didnt have any leaks except on some bad barbs, so i removed those got new, now all the barbs in the system are the same except on the drain line which is 3/8 tubing



and those havent leaked yet, so

story time..

So i am priming the system with the part i got today, and im filling up through the fill line, and get to a point where i haven water all the way up to the funnel (accident) in the fill line. so i turn it on and im ASSUMING the leak came from the fill line, not anywhere in the system, as they all share the same type of tubing and barbs and clamps, except for the fill port, BUT the system doesnt even need the clamp it's just for a peace of mind, So can anyone who saw pic 1 confirm and say that it just looks like a crappy barb or it's the tubing, (my hand was holding it so idk if that would apply any pressure).

Also i would like to know what anyone thinks of my build so far!!

As it has been a frustrating road, if anyone likes or would have any recommendations please do so!

additional pics







System is running atm with no leaks, i have the toilet paper in place and, Basically i just want a second opinion that confirms that it probably is my fill line, and not my setup. thanks for your time smile.gif
Dark Retribution
(21 items)
 
Concealed Fiend
(12 items)
 
 
CPUGraphicsRAMHard Drive
i5 3210m Nvidia GTX 660m 8GB DDR3 160mhz SODIMM 750GB 
Hard DriveOSMonitorKeyboard
Plextor 128GB mSATA SSD Windows 7 64bit PRO  14" 720p Standard Backlit 
CaseMouseMouse PadAudio
Asus ROG G46VW Razer Naga Razer vespuela Yasper standard headset with mic 
  hide details  
Reply
Dark Retribution
(21 items)
 
Concealed Fiend
(12 items)
 
 
CPUGraphicsRAMHard Drive
i5 3210m Nvidia GTX 660m 8GB DDR3 160mhz SODIMM 750GB 
Hard DriveOSMonitorKeyboard
Plextor 128GB mSATA SSD Windows 7 64bit PRO  14" 720p Standard Backlit 
CaseMouseMouse PadAudio
Asus ROG G46VW Razer Naga Razer vespuela Yasper standard headset with mic 
  hide details  
Reply