Did some pricing, Right now still in the Idea phase, and working out details. But heres what I have so far (when I get some plans worked up Ill post them. But I really like the TH10 from Case labs, and I like the pedistal that you can get. So I was thinking about doing something like that. But full acrylic. I was looking at size 15-16"w/33"h/26"d. I know big case. but I want to house 4 360 or 480 rads in it. and make a hinge system like on the th10, by getting a small section of acrylic tube cut it down some, and then gluing in a acrylic rod so that it sticks up a inch or two, then glue a acrylic tube to the panel, do this top and bottom maybe even in the middle so that both sides will swing open. Also make a slide out MB thing like the th10. I am also going to use acrylic tubing for the WCing.
Also thought about putting 2 res, one in each front corners, and setting up a system where it either looks water falls with Mayhems Aurora Coolant, or make a bubble system with dyed water. This wouldnt be attached to the WC itself. just there for looks. I make a pic of soon. I am going to light the case.
And so far just the case is looking to run around $400 worth of acrylic. And that having the place I order from cut the panels to size, then I would have to make mods to them. the Acrylic MB, an the 3/8 acrylic square rods for the fame. So not to bad. My wife was really suprised by the cost, she figured we where looking at 800 or more for acrylic. Now she is in a really hurry to start this. but got to get plans drawn up so we can get the ideas down and narrow them to what I want
Edit: here a very rough idea of the waterfall/bubbler thing for the front. Not any where to scale or anything. just a quick rough out idea so you can see it.
Edit 2: here is the door hinge idea rough out.Edited by Darkshadow74 - 6/6/13 at 8:48am