Overclock.net › Forums › Intel › Intel CPUs › E6400-3.2 OverClock Voltage Help!
New Posts  All Forums:Forum Nav:

E6400-3.2 OverClock Voltage Help!

post #1 of 12
Thread Starter 
Hey all!

curently runnin cornoe e6400 at 3.2 ghz 400x8 1.345 votls
gigabyte ds-3 motherboard kingstone value ram 667(5-5-5-15) at 400mhz 1gbx2

i use thermaltake bigwater 745 with 1 double radiator it has 2 but seemd that it will make no difrence if all 3 radiators will work as i saw in more pro systems that radiator with 2 fans is anought

the prob is that in stock voltage i get some programs not run smothly
uped it to 1.345 but saw some pplz using 1.360 volts

is there any1 with same board or scpess can advise me what voltages to use and all the rest all settings aplyed,,,
searched thru many posts but can figure it out for sure

plz help

2600K @ 4.7
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2600k GA-Z68X-UD3P-B3 Radeon 6970 8GB-1600 
Hard DriveOSMonitorPower
256GB-OCZMI Windows 7-x64 LG 23 Enermax Liberty620W 
Case
HAF932 
  hide details  
Reply
2600K @ 4.7
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2600k GA-Z68X-UD3P-B3 Radeon 6970 8GB-1600 
Hard DriveOSMonitorPower
256GB-OCZMI Windows 7-x64 LG 23 Enermax Liberty620W 
Case
HAF932 
  hide details  
Reply
post #2 of 12
welcome to the forum. I have nowhere near the spe of you. But may be able to give a little advice.

Anyway thats a nice oc

It may not be the voltage that's the problem maybe the fsb.
Isnt stock fsb 1066Mhz? and your running 400?

Also have you checked that the psu voltages are ok?
    
CPUMotherboardGraphicsRAM
E4300 1.8 @ 3.2 Asus P5K HIS x1600 2x1gb g.skill hz's pc2-6400 
Hard DriveOptical DriveOSMonitor
250gb maxtor sataII sata optical cdrw/dvd combo xp pro 17" hp tft 
PowerCaseMouse
corsair hx520 Thermaltake Xaser III usb optical 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E4300 1.8 @ 3.2 Asus P5K HIS x1600 2x1gb g.skill hz's pc2-6400 
Hard DriveOptical DriveOSMonitor
250gb maxtor sataII sata optical cdrw/dvd combo xp pro 17" hp tft 
PowerCaseMouse
corsair hx520 Thermaltake Xaser III usb optical 
  hide details  
Reply
post #3 of 12
Hi pizdets,

What's a "pizdet" anyway

Here's a bit of help.



Change the dram from 800 to 667 by bringing down the CPU speed. Once you achieve stability then you can begin to lower the CPU Vcore and retest. Do this until you have the lowest stable vcore. Test with Orthos Prime.
Roped In
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600k P8P67 Pro Rev (3.1) @ B3 XFX Radeon HD 6950 XXX 16GB G.SKILL Ripjaws 9-11-9-28 
Hard DriveOptical DriveOSMonitor
2 X Callisto Deluxe 25nm 60GB Plextor PX-B910SA 4x Blu-ray DVD-RW Win7 64 2 x Samsung 275T+ 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX10000 Antec 1200 Logitech G7 
Mouse Pad
Splatter Game Pad 
  hide details  
Reply
Roped In
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600k P8P67 Pro Rev (3.1) @ B3 XFX Radeon HD 6950 XXX 16GB G.SKILL Ripjaws 9-11-9-28 
Hard DriveOptical DriveOSMonitor
2 X Callisto Deluxe 25nm 60GB Plextor PX-B910SA 4x Blu-ray DVD-RW Win7 64 2 x Samsung 275T+ 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX10000 Antec 1200 Logitech G7 
Mouse Pad
Splatter Game Pad 
  hide details  
Reply
post #4 of 12
sorry just realised my post was complete nonsense apart from the welcome part which probably too was nonsense.

Apologies

If you're running w/c you can generally use more voltage than on air.

Just tweak until you find a suitible voltage.

Also what are temperatures like?
    
CPUMotherboardGraphicsRAM
E4300 1.8 @ 3.2 Asus P5K HIS x1600 2x1gb g.skill hz's pc2-6400 
Hard DriveOptical DriveOSMonitor
250gb maxtor sataII sata optical cdrw/dvd combo xp pro 17" hp tft 
PowerCaseMouse
corsair hx520 Thermaltake Xaser III usb optical 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E4300 1.8 @ 3.2 Asus P5K HIS x1600 2x1gb g.skill hz's pc2-6400 
Hard DriveOptical DriveOSMonitor
250gb maxtor sataII sata optical cdrw/dvd combo xp pro 17" hp tft 
PowerCaseMouse
corsair hx520 Thermaltake Xaser III usb optical 
  hide details  
Reply
post #5 of 12
Thread Starter 
ok txnks for the info

but as i have memory of 667 mhz and multiplier of 2 my system runs at 2.8

o wont to be ably to go higher than that.. for now i tun my mem at 400 dual and in bios it show 800 mhz and still running fine i think?

in cpuz it shows 1:1

what u advise?
2600K @ 4.7
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2600k GA-Z68X-UD3P-B3 Radeon 6970 8GB-1600 
Hard DriveOSMonitorPower
256GB-OCZMI Windows 7-x64 LG 23 Enermax Liberty620W 
Case
HAF932 
  hide details  
Reply
2600K @ 4.7
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2600k GA-Z68X-UD3P-B3 Radeon 6970 8GB-1600 
Hard DriveOSMonitorPower
256GB-OCZMI Windows 7-x64 LG 23 Enermax Liberty620W 
Case
HAF932 
  hide details  
Reply
post #6 of 12
Yes, you want to go higher. This is your beginning baseline You go here and test. Then you begin to raise your fsb and your DRAM will raise concurrently. Since you have value dram and since 1:1 is the best place to be, you are not looking for maximum overclocks, rather as high as your dram will allow your CPU to go.

See?
Roped In
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600k P8P67 Pro Rev (3.1) @ B3 XFX Radeon HD 6950 XXX 16GB G.SKILL Ripjaws 9-11-9-28 
Hard DriveOptical DriveOSMonitor
2 X Callisto Deluxe 25nm 60GB Plextor PX-B910SA 4x Blu-ray DVD-RW Win7 64 2 x Samsung 275T+ 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX10000 Antec 1200 Logitech G7 
Mouse Pad
Splatter Game Pad 
  hide details  
Reply
Roped In
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600k P8P67 Pro Rev (3.1) @ B3 XFX Radeon HD 6950 XXX 16GB G.SKILL Ripjaws 9-11-9-28 
Hard DriveOptical DriveOSMonitor
2 X Callisto Deluxe 25nm 60GB Plextor PX-B910SA 4x Blu-ray DVD-RW Win7 64 2 x Samsung 275T+ 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX10000 Antec 1200 Logitech G7 
Mouse Pad
Splatter Game Pad 
  hide details  
Reply
post #7 of 12
Thread Starter 
ok txnk for the info for now i got test all the settings and post all the info with the tests after i find the max i can get out of my system ...
2600K @ 4.7
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2600k GA-Z68X-UD3P-B3 Radeon 6970 8GB-1600 
Hard DriveOSMonitorPower
256GB-OCZMI Windows 7-x64 LG 23 Enermax Liberty620W 
Case
HAF932 
  hide details  
Reply
2600K @ 4.7
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2600k GA-Z68X-UD3P-B3 Radeon 6970 8GB-1600 
Hard DriveOSMonitorPower
256GB-OCZMI Windows 7-x64 LG 23 Enermax Liberty620W 
Case
HAF932 
  hide details  
Reply
post #8 of 12
Thread Starter 
currently started test on memtest had stable no errors for 1 hour at 5/5/5/15 +0.2 vdimm

at prime orthos for now 2 hours only stable no errors tat shows 47/45 (full load) temps will see what be in morning .

clocked at 2.3 8x400 and 800 mhz for kingstone 667 value ram ...
tried the memtest at lower frequency's no luck ...

fsb+0.1 v.
mch +0.1 v.
cpu voltage 1.35 v.
2600K @ 4.7
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2600k GA-Z68X-UD3P-B3 Radeon 6970 8GB-1600 
Hard DriveOSMonitorPower
256GB-OCZMI Windows 7-x64 LG 23 Enermax Liberty620W 
Case
HAF932 
  hide details  
Reply
2600K @ 4.7
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2600k GA-Z68X-UD3P-B3 Radeon 6970 8GB-1600 
Hard DriveOSMonitorPower
256GB-OCZMI Windows 7-x64 LG 23 Enermax Liberty620W 
Case
HAF932 
  hide details  
Reply
post #9 of 12
Quote:
Originally Posted by pizdets View Post
currently started test on memtest had stable no errors for 1 hour at 5/5/5/15 +0.2 vdimm

at prime orthos for now 2 hours only stable no errors tat shows 47/45 (full load) temps will see what be in morning .

clocked at 2.3 8x400 and 800 mhz for kingstone 667 value ram ...
tried the memtest at lower frequency's no luck ...

fsb+0.1 v.
mch +0.1 v.
cpu voltage 1.35 v.
You mean Clocked at 3.2? Running 800Mhz on the Dram at 5 - 5 - 5 - 15?
Not bad. Corsair Value DRAM DDR667 makes 800MHz with 2.1V @ 4 - 4 - 4 - 12 with six sticks I have tried. So it's nice to know the difference between Kingston Value and Corsair Value. Both making 800MHz from 667 on Value sticks is a good thing at any rate.

Well done.

L'chaim
Roped In
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600k P8P67 Pro Rev (3.1) @ B3 XFX Radeon HD 6950 XXX 16GB G.SKILL Ripjaws 9-11-9-28 
Hard DriveOptical DriveOSMonitor
2 X Callisto Deluxe 25nm 60GB Plextor PX-B910SA 4x Blu-ray DVD-RW Win7 64 2 x Samsung 275T+ 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX10000 Antec 1200 Logitech G7 
Mouse Pad
Splatter Game Pad 
  hide details  
Reply
Roped In
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600k P8P67 Pro Rev (3.1) @ B3 XFX Radeon HD 6950 XXX 16GB G.SKILL Ripjaws 9-11-9-28 
Hard DriveOptical DriveOSMonitor
2 X Callisto Deluxe 25nm 60GB Plextor PX-B910SA 4x Blu-ray DVD-RW Win7 64 2 x Samsung 275T+ 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX10000 Antec 1200 Logitech G7 
Mouse Pad
Splatter Game Pad 
  hide details  
Reply
post #10 of 12
fsb is at 3:5 and then 5-5-5-12 is that good considering there from g skill 677 and only 1 gig
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Pentium D 3.2 @ 3.92 Abit Aw8d EVGA 260 GTX 3Gb Coisair 
Hard DriveOSMonitorKeyboard
1 TB Windows 7 20.1 LCD Logitech G15 Gaming 
PowerCaseMouse
Thermaltake 650watt power supply CodGen Briza-63 Logitech G5 Laser Mouse 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Pentium D 3.2 @ 3.92 Abit Aw8d EVGA 260 GTX 3Gb Coisair 
Hard DriveOSMonitorKeyboard
1 TB Windows 7 20.1 LCD Logitech G15 Gaming 
PowerCaseMouse
Thermaltake 650watt power supply CodGen Briza-63 Logitech G5 Laser Mouse 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › E6400-3.2 OverClock Voltage Help!