Overclock.net › Forums › Graphics Cards › AMD/ATI › problems with crossfire
New Posts  All Forums:Forum Nav:

problems with crossfire

post #1 of 3
Thread Starter 
I have 2 7950 Sapphire Vapor-X cards and whenever I try to install the drivers and reboot I get an atikmpag.sys error upon bsod. I'm installing 13.1 drivers and it works with one card, but not both in crossfire.


Aero is also disabled and when I try to launch CCC it gives me this error:


Warning: Spoiler! (Click to show)


I have tried each card individually with a fresh install of 13.1 and they both work fine. The problem occurs when I attempt to put the 2nd card in and bridge them, then the drivers become corrupt or something and I have to reinstall for just 1 to work.
post #2 of 3
Thread Starter 
Card 1 in slot 1 works alone.
Card 2 in slot 2 works alone.
There can't be anything wrong with the cards and there can't be anything wrong with the motherboard.
post #3 of 3
Thread Starter 
Got it to work, never mind, my clocks kept trying to change on boot so I had trixx restore them on boot to keep them the same clocks.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › problems with crossfire