Overclock.net › Forums › Intel › Intel Motherboards › How do I overclock 2500K
New Posts  All Forums:Forum Nav:

How do I overclock 2500K - Page 2

post #11 of 34
ok I have an asus board double checked it, highlight the by core and use the plus minus keys to oc the multiplier. leave cpu ratio on auto.

let us know if it works.
post #12 of 34
Thread Starter 
+rep thanks it worked

although not with +/- but with backspace key. Also i am using offset mode so what setting should i keep. PPL overvoltage disabled/enabled. Also i have left the offset voltage to .020 with -
post #13 of 34
PPL overvoltage enabled the rest looks good, download inteli burn and real temp run the inteli burn test on standard and see how it it does and if its stable my i5 2500k maxes at 4.7 Ghz with 85C temps dont go over 85C temp for the cpu.
Edited by Bluelighting - 2/3/13 at 10:01am
post #14 of 34
I have the same BIOS, where the ratio says 'Auto' you just highlight and type whatever you want. My 24/7 is 45 multiplier with -0.020 offset, hottest core is 69C after 6 hours of Prime
Meh
(11 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @4.7GHz Asus P8Z68-V GEN3 GTX Titan 16GB Mushkin Redline Ridgeback 
Hard DriveHard DriveCoolingOS
Crucial M4 128GB  2x 500GB WD Green RAID1 + WD 2TB Green  Noctua Nh-DH 14 Win 8 Pro x64 
MonitorPowerCase
Shimian Achieva 2560x1440p IPS Corsair AX850 Lian-Li PC-A05N 
  hide details  
Reply
Meh
(11 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @4.7GHz Asus P8Z68-V GEN3 GTX Titan 16GB Mushkin Redline Ridgeback 
Hard DriveHard DriveCoolingOS
Crucial M4 128GB  2x 500GB WD Green RAID1 + WD 2TB Green  Noctua Nh-DH 14 Win 8 Pro x64 
MonitorPowerCase
Shimian Achieva 2560x1440p IPS Corsair AX850 Lian-Li PC-A05N 
  hide details  
Reply
post #15 of 34
Thread Starter 
i am running prime for the past 8 hrs but cpuz and real temp do not show the total load to be 4600Mhz (46x) however it does show that all cores are under stress. what might be the reason ???
post #16 of 34
Thread Starter 
here is the pic for additional info. (RealTemps shows 44min coz i shut it down and opened again to be sure)
post #17 of 34
Thread Starter 
bump
post #18 of 34
I cant read taht pic at all, can you blow it up a bit so we can read it
post #19 of 34
Thread Starter 
well are you trying from a pc or cell phone...coz on pc when you click on the image, it would enlarge.
post #20 of 34
ok the cpuz pic shows your multiplier set as 16, are you sure you save d the oced 46 multiplier in bios.

reenter BIOS and check the multip[lier there if it is set at 16 left click and highlight it physcialy type in the number 46 then hit enter then exit in upper left corner on next screen save changes and exit. then open cpuz and see what it says

post back ill check in a bit to see what you got
Edited by Bluelighting - 2/5/13 at 5:21am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › How do I overclock 2500K