Overclock.net › Forums › Intel › Intel CPUs › i7 3770 non K OC
New Posts  All Forums:Forum Nav:

i7 3770 non K OC - Page 7

post #61 of 113
looks friend, it's right?


post #62 of 113
Hello friend, I'm sorry for the above post, I made a mistake. redface.gif

Now that I noticed was that the BLCK 103.0 mad.gif

I redid the test now with the BLCK to 100.0 thumb.gif



Edited by maicoalvim - 3/17/14 at 10:30pm
post #63 of 113
RealTemp shows that your C States are enabled and you are using the 42 multiplier.
post #64 of 113
Is that good? rolleyes.gif
post #65 of 113
42 is better than 41 so that's good.

You can turn your BCLK overclock on as long as your CPU remains stable.
Edited by unclewebb - 3/18/14 at 11:14am
post #66 of 113
I can put on 42 without problems?
post #67 of 113
Quote:
Originally Posted by maicoalvim View Post

I can put on 42 without problems?

Well, you can use at most 41 for all four cores active. When Windows disables cores because there's not enough for them to do currently, that's when the other, higher numbers will start to get used. I linked to Intel's documents about the stock settings for the CPUs in post #48.

The highest numbers you can use on yours is 43 for one and two cores active, and 42 for three cores active.

I just don't like the idea of going above 41 because you will never really be able to test if your PC is running stable or not. When you use a stress test that runs on all four cores, you can't test the 42 and 43 multiplier, only the 41 multiplier. When you limit the test to run on a single core, you can only have it run at 43 if Windows disables two cores, and that's random and will only happen rarely. You can't disable cores for testing completely in the BIOS, because you then wouldn't be able to test each of the four cores individually. You need to test each core because the first two might behave differently and you won't have proof that the disabled cores three and four will also run stable at 43.

I would personally just stay with 41 for all four multiplier settings, instead play around with the 100MHz BCLK just like you are already doing.
post #68 of 113
Quote:
Originally Posted by deepor View Post

Well, you can use at most 41 for all four cores active. When Windows disables cores because there's not enough for them to do currently, that's when the other, higher numbers will start to get used. I linked to Intel's documents about the stock settings for the CPUs in post #48.

The highest numbers you can use on yours is 43 for one and two cores active, and 42 for three cores active.

I just don't like the idea of going above 41 because you will never really be able to test if your PC is running stable or not. When you use a stress test that runs on all four cores, you can't test the 42 and 43 multiplier, only the 41 multiplier. When you limit the test to run on a single core, you can only have it run at 43 if Windows disables two cores, and that's random and will only happen rarely. You can't disable cores for testing completely in the BIOS, because you then wouldn't be able to test each of the four cores individually. You need to test each core because the first two might behave differently and you won't have proof that the disabled cores three and four will also run stable at 43.

I would personally just stay with 41 for all four multiplier settings, instead play around with the 100MHz BCLK just like you are already doing.



I'm understanding better now.
As my i7 processor is not a K, I can leave the BLCK at 100.0 and 41? This is good?

I wanted something not harmful to the mother and plava processor.

Forgive me so many questions my friend, and thank you for your attention and time to answer me.
post #69 of 113
I don't know if adding something to BCLK can actually be harmful to the chips on the motherboard or the graphics card or something else. I think I would play a little with it, try to see if 102 or 102.5 or 103 MHz runs fine.

41 * 101 = 4141
41 * 102 = 4182
41 * 103 = 4223
41 * 104 = 4264
41 * 105 = 4305

I don't know what is too much to add to the 100.0 MHz.
post #70 of 113
Oh yes!

I'll get home today I will do some tests.

Look at the print of my motherboard, so I can by 102.0 to get right?

thank you


New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › i7 3770 non K OC