Overclock.net › Forums › AMD › AMD CPUs › OC Phenom II x6 1045t with Gigabyte 970A D3
New Posts  All Forums:Forum Nav:

OC Phenom II x6 1045t with Gigabyte 970A D3 - Page 2

post #11 of 13
I found it biggrin.gif
I tried to give you the fast way, didn't work. Now better try this

http://www.overclock.net/t/777378/official-gappos-little-deneb-thuban-overclocking-guide-with-too-many-smileys

Read it and follow the steps one by one, it's the better advice i can give you thumb.gif

Question without fear if you have doubts, good luck
post #12 of 13
Thread Starter 
It's Rev 3.0 and unfortunately I only went for 1333 this time.
post #13 of 13

That may give you a flexibility wall when your CPU hits 3.4GHz. 4Ghz speeds require a 300Mhz FSB, suited best for DDR3-1600 RAM because you can set DDR3-1600 RAM to DDR3-1600 via the x5.33 multiplier and be done with it. There is a fine line between overclocking-ready DDR3-1600 and generic DDR3-1333. DDR3-1333 kits may not reach 1600 at all; I've seen it happen in the many users I've addressed here. RAM binning processes seem to have improved in my opinion, though. Just letting you know, you may need to adjust your OC targets.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › OC Phenom II x6 1045t with Gigabyte 970A D3