Oh boy.. The itch is back -_-
Im seriously considering venturing into acrylic tubing!
this is an older pic, but my setup still looks more or less like this.
My plan is to change the tubes: 240rad->GPU, GPU->CPU and CPU->120mm.. leaving the tube between 120->res and pump->240 since that would be a pain in the old butt to replace with acrylics.. and wont really be that visible.
Only stuff I can get my hands on is:
EK - HD Tube 16/12mm - 1meter
EK - HD Adaptor 16/12mm - 6pts
anyone have any good / bad stuff to say about that?
Since Im going acrylic, I will probably add some dye to the coolant.. any suggestions? was thinking red since that is kinda my theme here..
Mayhems deep red.. would that work with cheap distilled water (+ silver coils) or does it need to be added to mayhems own premixes or something?
While I'm at it, I'm probably also gonna pick up a light bar upgrade kit for my RAM blocks
Probably the white bar since blue is out of my build and red dosnt exist yet (except in rare cases.. but they are more pink than red)
I wont get started right away since I have some money problems at the moment.. so the itch is quite annoying
for all this.. about 150 dollars.
Any thoughts? Think it is gonna look good ? or should I just stick with what I have now?Edited by GaMbi2004 - 2/26/14 at 10:45am