Overclock.net › Forums › Intel › Intel CPUs › Am i good to go?3930k overclocked to 4.6ghz?safe settings?
New Posts  All Forums:Forum Nav:

Am i good to go?3930k overclocked to 4.6ghz?safe settings?

post #1 of 5
Thread Starter 
Hello guys.
today i overclocked my cpu to 4.6 ghz i was testing with prime and linx and it looks pretty stable.

my question is if i am using safe settings because its new parts and i am kinda worried about it haha so lets start:
Code:
Ai Overclock Tuner.................X.M.P
CPU LEVEL UP.......................DISBALED
X.M.P. DDR3-1600 7-7-7-24-2N-1.500V
BCLK FREQUENCY.....................100
CPU STRAP..........................100Mhz
ClockGen Full Reset................Enabled
Turbo Ratio........................By all cores
By all cores(can adjust in OS).....46
CPU Clock Gen Filter...............20UF
Memory Frequency...................DDR3-1600Mhz
Xtreme Tweaking....................Disabled
EPU power Saving Mode..............Disabled

BCLK Skew..........................Auto
Cpu Vcore Voltage..................Manual Mode
Cpu Voltage.............................1.360
VTT Cpu Voltage....................Auto
2nd VTTCPU Voltage.................Auto

CPU VCCSA Voltage..................Manual Mode
CPU VCCSA Manual Voltage...........auto
Dram Voltage(cha,chb)..............1.5v
Dram voltage(chc,chd)..............1.5v
CPU PLL Voltage....................1.8v
PCH 1.1v Voltage...................Auto
VTTDDR Voltage(cha,chb)............Auto
VTTDDR Voltage(chc,chd)............Auto

Digi+Power Control:
Cpu Load-line Calibration..........Medium
Cpu Current Capability.............180%
Cpu Voltage Frequency..............Manual
Cpu Fixed Frequency................350
VRM Over Temperature Protection....Disabled
CPU power Duty Control.............T.Probe
Vcore MOS volt.Control.............Auto
Cpu Power Phase Control............Extreme[Cannot be changed if i put 180% on cpu current capability)
Cpu VCORE Boot Up Voltage..........Auto
VCCSA Load-line Calibration........High
vccsa Current Capability...........140%
VCCSA Fixed Frequency..............350
CPU Vccsa Boot Up Voltage..........Auto
Cpu VTT Switching Freq.............1.3x
Cpu VTT Over-Current Protection....Disabled
Dram-AB Current Capabiltiy.........140%
Dram-AB Voltage Frequency..........Manual
Dram-ab Fixed Frequency Mode.......350
Dram-AB Power Phase Control........Optimized
Dram-CD Current Capability.........140%
Dram-CD Voltage Frequency..........Manual
Dram-CD Fixed Frequency Mode.......350
Dram-CD Power Phase Control........Optimized
PCH 1.1V Switching Freq............1.3x

Cpu Configuration:
Intel Adaptive Thermal Monitor.....Disabled
Hyper-Threadig.....................Enabled
Active Processor Cores.............All
Limit CPUID Maximum................Disabled
Execute Disable Bit................Enabled
Hardware Prefetcher................Enabled
Adjacent Cache Line Prefetch.......Enabled
Intel Virtualization Technology....Enabled

Cpu Power Managment Configuration:
CPU Ration.........................Auto
Enhanced Intel SpeedStep Technology.Enabled
Turbo Mode..........................Enabled
CPU C1E.............................Enabled
CPU C3 Report.......................Disabled
CPU c6 Report.......................Disabled
Cpu c7 Report.......................Disabled
Anti Surge Support..................Disabled

thats the settings i am using am i safe?do i have to change anything?
thanks and have a nice day
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
post #2 of 5
You should run LinX with more memory load. Ideally more than 80% of your total physical memory. If you can pass 20 runs with that, I guess you're good to go.

Also, I'm little bit concerned about your GFlops reading. I'm running my 3930k at 4.625GHz and getting around 138GFlops with the same memory size you used. (Same LinX 0.64 AVX edition btw)
Edited by Whalemeal - 2/11/13 at 2:10pm
post #3 of 5
Thread Starter 
thanks for the quick answer but what about the bios settings they are safe?
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
post #4 of 5
Quote:
Originally Posted by someonewhy View Post

thanks for the quick answer but what about the bios settings they are safe?

Yes, they look very safe to me. I'm running mine at 1.43V without an issue. Your temp and voltage looks great to me and I would say you're pretty lucky to pick that CPU thumb.gif
post #5 of 5
Thread Starter 
btw i am using 4gb of ram not 32 sold the old ones thats why.
Edited by someonewhy - 2/11/13 at 2:26pm
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Am i good to go?3930k overclocked to 4.6ghz?safe settings?