Overclock.net › Forums › Cooling › Water Cooling › Aquacomputer Aquastream pump dimensions ?
New Posts  All Forums:Forum Nav:

Aquacomputer Aquastream pump dimensions ?

post #1 of 4
Thread Starter 
Hi all,

I'm considering said pump (aquacomputer Aquatream XT Ultra) but found out different measurements references
- Aquacomputer's are L 112 x H 72 x W 52
- Other site (eg. Aquatuning.de) state the Eheim 1046 dimensions as L 145 x H 103 x W 75

I assume to be the total footprint including the pump's mounting plate and adapters, but I'd rater confirm it before than after buying one....

Speaking of buying one, what silent pump (decoupled using foam) would be recommend in an area that's 80 mm wide:
- Aquastream XT
- D5 PWM (fits with the EK D5-X top, that's exactly 80 mm wide)
- MCP 35X

Many thanks!
post #2 of 4
The most silent pump with excellent performance is the D5. The MCP35X is not quite as quiet, but is significantly smaller than the D5 and more powerful; but you have to be aware of heat issues if running on full and no airflow.

[Edit]
Eheim Pump - Low Flow, Medium Pressure
D5 - High Flow, Medium Pressure
MCP35X - High Flow, High Pressure
Edited by Electrocutor - 2/11/13 at 2:30pm
post #3 of 4
Mhhh, and that is what I have measured some time ago:



Ohne grauen Filterdeckel = Without grey filter cap
Mit Bodenplatte = With base plate
post #4 of 4
Thread Starter 
Many thanks, it's much clearer now! thumb.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Aquacomputer Aquastream pump dimensions ?