Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › "FATAL" FX-8350, 6 MONITORS! HD7850 4GB DDR5 & HD6970 2GB DDR5 32gb 1866 ~Full Parallel water cooled~
New Posts  All Forums:Forum Nav:

"FATAL" FX-8350, 6 MONITORS! HD7850 4GB DDR5 & HD6970 2GB DDR5 32gb 1866 ~Full Parallel water cooled~ - Page 19

post #181 of 851
Thread Starter 
Ok got all the pump fittings done! biggrin.gif








post #182 of 851
Thread Starter 
Ok just finished attaching the compression fittings to the Corsair 100i modded to be waterblock, the fittings are made of high temp plastic so I could not just melt and compress for a seal, so I had to trim, smooth and use a tight fit with Gorilla Glue, so hopefully it seals good! tongue.gif








post #183 of 851
Thread Starter 
Working on the RES now! Bacardi 151 will get a few compression fittings If I can help it lol.....



post #184 of 851
Thread Starter 
Got the second one in and looking good so far! thumb.gif



post #185 of 851
Thread Starter 
I have the CPU block wired up and looking good, I installed one of the Corsair RGB led strips to light it up and I also wired up the temp node that came with the H100i so I can wire it to the Corsair Link temp module. So I will have two readings for the cpu temp!, One for the die its self and one that takes a reading off the block! biggrin.gif




post #186 of 851
Thread Starter 
Well a little tubing and some artic silver 5 later I have my CPU loop fully installed! biggrin.gif Looking pretty good. Ignore the extera slack in the tubing, I left extera because I have to go back later and make holes for the GPU tubes etc....




post #187 of 851
Thread Starter 
Leak already lol mad.gif . its gonna be a long nite lol!!!!!!!!!!!!

post #188 of 851
Thread Starter 
I heated up some glue with the heat gun..... Lol I guess I got it too hot, we will see if it leaks I guess lol. Not too worried just because I can by another Bacardi 151 bottle lol!

post #189 of 851
Could you not use some clear silicone on that joint? Or even black, might look ok?
post #190 of 851
I don't know if you can get it there, but Pratley Putty will stop that leak. It's a 2 part putty that you mix together and when it sets it's like steel. If you can get it there, it might be worth a try. It's also a South African invention, so you know I had to put it out there.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › "FATAL" FX-8350, 6 MONITORS! HD7850 4GB DDR5 & HD6970 2GB DDR5 32gb 1866 ~Full Parallel water cooled~