Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › "FATAL" FX-8350, 6 MONITORS! HD7850 4GB DDR5 & HD6970 2GB DDR5 32gb 1866 ~Full Parallel water cooled~
New Posts  All Forums:Forum Nav:

"FATAL" FX-8350, 6 MONITORS! HD7850 4GB DDR5 & HD6970 2GB DDR5 32gb 1866 ~Full Parallel water cooled~ - Page 3

post #21 of 851
Thread Starter 
So I decided while having this time on my hands that I would clean the H70, and im glad I did because it had some build up from the old coolant. I do see why the H100i is better though, the H100i fins on the block have a rubber jet that directs the incoming stream directly in the middle of the fins thus having a even cool of the die, but with the H70 it had nice big fins but its a directional flow so naturally one side of the die would be cooler than the other..... The H70 has a circular Fin magnetic floating pump just as the H100i but the big difference is the H100i is obviously a higher quality setup thus it runs smoother and quieter.....



post #22 of 851
Thread Starter 
I tested my 3 XSPC 360mm Radiators today with my high pressure pump, and my two EX360's did great with a 50PSI test but my RS360 RAD exploded lol. I was however able to solder the leaks and I painted and Baked it with some other parts after painting and will test it later for leaks once its dry. I am very satisfied with the results of my test though and will be using the pump, and if I do reuse the repaired RAD I will defiantly have it on the bottom of the case lol. I was able to score alot of great fittings and awesome screws for the rad, they look great! biggrin.gif














post #23 of 851
Thread Starter 
Ok im done testing the RAD and it looks good dry and no leaks, I think im gonna use it but im going to use it with the two H70's so it doesn't stress the RAD also gonna bottom mount it. Also im dont painting the card screw plate and it looks great!!!





Edited by MCCSolutions - 2/15/13 at 2:47pm
post #24 of 851
Thread Starter 
Just got done putting the last coat of paint on the repaired RAD and now its to the oven.......


Edited by MCCSolutions - 2/16/13 at 1:02am
post #25 of 851
Thread Starter 
I bought the rest of my ram, got a 32gb kit for $150, gonna usee 16gb of it with my 2 red 16gb for 32gb total. I guess I will sell the other 16gb, as well as the 2000mhz 4gb kit I have. Got some nice thumb screws too!

Processed By eBay with ImageMagick, R1.1.1.M1
Processed By eBay with ImageMagick, R1.1.1.M2b
post #26 of 851
Thread Starter 
Between this build and my oter my work room is a freaking mess lol, also forgot to mention that I got my new processor in the mail the other day. The FX-8350!!!! biggrin.gif



post #27 of 851
Wow. That is quite the undertaking you have going there. Looks awesome. Subbed for sure.
onlyHAFsane
(10 items)
 
   
CPUMotherboardGraphicsRAM
FX-8350 ASUS Sabertooth 990FX R2.0 Sapphire HD7950 Vapor-X Corsair Vengance LP (2x4GB) 
Hard DriveHard DriveOSKeyboard
Samsung 840 EVO WD Black Windows 7 x64 Logitech G105 
PowerMouse
SeaSonic X650 Fully Modular Mionix Naos 5000 
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 BE  ASUS M5A97 Evo Sapphire Radeon 7850 HD 2GB 8GB (2x4GB) Corsair XMS3 
Hard DriveOptical DriveCoolingCooling
Seagate Barracuda 759GB ASUS DVD-RW 24x F-2x120mm R-1x120mm 2x80mm Cooler Master Hyper 212 EVO w/ Swiftech Helix 
OSMonitorKeyboardPower
Windows 7 x64 Panasonic 42" Plasma Logitech K400 Antec HCG 520M 
CaseOther
Cooler Master HAF XB NZXT 5 Channel Fan Controller  
  hide details  
Reply
onlyHAFsane
(10 items)
 
   
CPUMotherboardGraphicsRAM
FX-8350 ASUS Sabertooth 990FX R2.0 Sapphire HD7950 Vapor-X Corsair Vengance LP (2x4GB) 
Hard DriveHard DriveOSKeyboard
Samsung 840 EVO WD Black Windows 7 x64 Logitech G105 
PowerMouse
SeaSonic X650 Fully Modular Mionix Naos 5000 
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 BE  ASUS M5A97 Evo Sapphire Radeon 7850 HD 2GB 8GB (2x4GB) Corsair XMS3 
Hard DriveOptical DriveCoolingCooling
Seagate Barracuda 759GB ASUS DVD-RW 24x F-2x120mm R-1x120mm 2x80mm Cooler Master Hyper 212 EVO w/ Swiftech Helix 
OSMonitorKeyboardPower
Windows 7 x64 Panasonic 42" Plasma Logitech K400 Antec HCG 520M 
CaseOther
Cooler Master HAF XB NZXT 5 Channel Fan Controller  
  hide details  
Reply
post #28 of 851
Thread Starter 
Quote:
Originally Posted by boxwunder13 View Post

Wow. That is quite the undertaking you have going there. Looks awesome. Subbed for sure.

Thanks I wont be posting much until Saturday but I promise there should be some good stuff then!!! But I have been picking some stuff up for my other Build..... smile.gif
post #29 of 851
Thread Starter 
DANG FINALLY GOT MY CASE!!! biggrin.gif Pics coming soon.....
post #30 of 851
Thread Starter 
1
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › "FATAL" FX-8350, 6 MONITORS! HD7850 4GB DDR5 & HD6970 2GB DDR5 32gb 1866 ~Full Parallel water cooled~