Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › "FATAL" FX-8350, 6 MONITORS! HD7850 4GB DDR5 & HD6970 2GB DDR5 32gb 1866 ~Full Parallel water cooled~
New Posts  All Forums:Forum Nav:

"FATAL" FX-8350, 6 MONITORS! HD7850 4GB DDR5 & HD6970 2GB DDR5 32gb 1866 ~Full Parallel water cooled~ - Page 36

post #351 of 851
Thread Starter 
Quote:
Originally Posted by ivanlabrie View Post

Save them for a spare build... biggrin.gif

Maybe you can get one of the new gtx 670 dcuII mini cards and do an Intel NUC type of rig xD

Lol I dont do Nividia sorry lol tongue.gif
post #352 of 851
Me neither...but that card is REALLY tiny.
post #353 of 851
Thread Starter 
Ok so check it out, I thought you guys mite want a sneak peak of the next build I have in mind. I know its BIG its UGLY and its NASTY but its freaking awesome. Welcome to the retired military J-Box(Junction Box) Its loaded with serial, bnc, and fiber optic connectors..... Im thinking a Mini ITX setup with some crazy crap for a Lan Boy setup or sum thing but I guess we will see..... I was thinking of painting it but the Mil green aint that bad, maybe a quick sand and a clear coat is all it needs...... thinking.gif

LINK TO THIS NEW BUILD: http://www.overclock.net/t/1368480/military-themed-case-with-real-military-parts-made-by-a-military-guy-i-need-ideas-check-it-out











devil.gif


Apparently my girls are gonna help me work on it lol..... smile.gif





Edited by MCCSolutions - 3/7/13 at 1:57am
post #354 of 851
Thread Starter 
Ok so back to the PSU and I need to get this done tonite! So im thinking to avoid using messy vynal to cover the open space after adding a riser, Im going to cut and use Opaque Red plexi and cut it perfect to fit and still use the preformed lip of the psu. But I do plan to very carfully cut out the Fatal logo to allow light threw, im also installing two red cold cathodes that I was trying to figure out what to use for anyways lol!



Edited by MCCSolutions - 3/7/13 at 3:43am
post #355 of 851
hahaha! them lil gals tongue.gif
I think that thing looks cool, and would be a fine modding project with some work on the external appearance and some cutting here and there. rolleyes.gif
You need to do a phase change cooled rig inside that, or maybe a benching rig with an ln2 pot.
post #356 of 851
Thread Starter 
Quote:
Originally Posted by ivanlabrie View Post

hahaha! them lil gals tongue.gif
I think that thing looks cool, and would be a fine modding project with some work on the external appearance and some cutting here and there. rolleyes.gif
You need to do a phase change cooled rig inside that, or maybe a benching rig with an ln2 pot.

Yea, thanks for the input. Im thinking of creating a thread for it to bounce ideas, but I dont like doing that when I know I dont even have parts for it yet like a mobo etc..... Im also thinking I shouldn't have sold all the extra ram I had lol...... At least im still good in the SSD, and water cooling Dept lol.... rolleyes.gif
post #357 of 851
Thread Starter 
Talk about a good OMEN! If I cut this piece down the middle it will fit perfectly on both sides! Only two cuts! Talk about good luck thankyou Korea and your practice of the Metric system! applaud.gif



Edited by MCCSolutions - 3/7/13 at 3:43am
post #358 of 851
Thread Starter 
Ok ROUND 2: ME 3 PSU 1.... rolleyes.gif





Edited by MCCSolutions - 3/7/13 at 3:44am
post #359 of 851
Thread Starter 
Quote:
Originally Posted by Terrere View Post

Knowing you you'll just decide to make an all acrylic custom case for your PSU devil.gif Or file out the hole just a little larger... Honestly don't know what to expect!

OK lol I just caint get over how much you were on pint with this comment, I mean almost exactly what I did lol cheers.gif . So what im doing now after checking the fit is im actually going to cut a portion of the mid plat of the case to accommodat the flow, it is so perfect of a fit that im thinking of cutting the shape perfect and using the screws and fan guard of the psu and screwing them threw the plat for a perfect looking fit instead of a cut out lol. Also since im doing that I will probably paint the PSU fan guard red, naturally to contrast the black and stand out thumb.gif















Edited by MCCSolutions - 3/7/13 at 4:53am
post #360 of 851
Thread Starter 
Say goodbye to the Fatal logo trim, its being upgraded to a Red Cathode glowing cutout!!!!



Edited by MCCSolutions - 3/7/13 at 5:56am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › "FATAL" FX-8350, 6 MONITORS! HD7850 4GB DDR5 & HD6970 2GB DDR5 32gb 1866 ~Full Parallel water cooled~