Originally Posted by Ashuiegi
wow this look nice but at the same time it look like a nightmare to make
for how long do you plan to keep this build ? because your putting a hell lot of work on it.
is the vynal glued on ? i worry the heat from the psu would unglue it with time and the side come off after.
I usually build a new one each year but I will probably keep this one till about 2015! And I try to put as much love and detail into all of my builds corresponding with the cost and what its going to be used for of coarse... Well actually I thought ahead and got UV resistant vynal, glue backed type but its made for automotive applications so it should do just fine, also I have had a heat gun to it and it reacts well to heat!
Originally Posted by SeeK
Sorry, 8GB kit of the same series running at stock XMP1.2 settings on that rig. No memory problems at all.
If the ramdisk is causing problems due to bad timing, it would likely result in system-wide instability and BSODs. Could possibly be the ramdisk driver you are using doesn't fully emulate drive functionality or the Installers are hard coded to expect a [larger] write delay or something. I would run Memtest86 on it overnight and see what happens if you're concerned about mem problems.
Well I have had some experience with ram disks and haven't had this problem before(they were on a server though) and I have already tested the ram, it seems to be an execution problem for compressed msi or exe packets, im thinking its because the SSD is caching some of the data as it strings along then when it comes time to transfer to the RAM disk the whole operation crashes because of the huge difference in there bus transfer rates......... Not a big deal though I do have a 60gb SSD I can cache with....