Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › "SCORCH" BUILD Another all red AMD build. Phenom II 820 OC, Budget Build! HD5750, RED AND PINK Cathodes, Thermaltake V3 Black AMD Edition
New Posts  All Forums:Forum Nav:

"SCORCH" BUILD Another all red AMD build. Phenom II 820 OC, Budget Build! HD5750, RED AND PINK Cathodes, Thermaltake V3 Black AMD Edition - Page 9

post #81 of 211
Thread Starter 
Ok back to this build a little bit, gonna drain the H50 soon and do the coolant mix I want..... Also doing the final coat on the RAD, and Installing the Lighting on the MOBO. Preparing for the transplant between the two PSU's as well.... sonic.gif






post #82 of 211
Thread Starter 
Ok Rad is good from paint and bolted in, got the Pink/red cathodes clued and mounted, I sleeved the Cathode cables and used heat shrink tubing on them. Gonna install a master switch for all Cathodes on the back, also the Radiator Fans will have a controller as well, variable and will either be front or back havent decided yet....... rolleyes.gif Its looking good though overall Havent got around to checking and draining the H50 but its on my agenda..... Also a frend borrowed my Soldering Iron yesterday and hasent brought it back yet so im gonna try to use my mini-torch to solder on the new wires to the Replacement PSU PCB, but worst case sen`ario is I twist them and use heat shrink..... thumb.gif









post #83 of 211
Thread Starter 
Ok so got the new Pink Cathodes sleeved up with PET, and looking nice.... Overall its starting to get a coming together look....... wheee.gif





post #84 of 211
Thread Starter 
Just finished mounting the RAD and new bad ass fans, also PET Sleeved the fan wires and am going to wire it to the PSU then wires from the PSU to the Rear controller to controll the top fans and the Cathodes... biggrin.gif Gonna look great!






post #85 of 211
Thread Starter 
Ok done making the closed loop with the H50 and its ovious its not strong enough..... So I guess Ill have to wait till I get the pump.................... But other than that its all going good, gonna finish the PSU and cabling tommorow.....




























post #86 of 211
Thread Starter 
AND SO PHASE THREE BEGINS!!!! devil.gif





post #87 of 211
Thread Starter 
Working on the cableing now, I did some of them in PET yesterday. I totally forgot I had bought Military 550 cord(Paracord on steroids) for this build lol doh.gif
Im starting to install the 550 on the wires now, the old idea of using the red material was good but I think this will have a much better look biggrin.gif











post #88 of 211
Thread Starter 
Dont want to mix these up blinksmiley.gif

post #89 of 211
Thread Starter 
Ok got the Pet done for the front connectors and buttons!!! guitar.gif And they look awesome!!!

Also finished the cable for the Graphics Card! biggrin.gif













post #90 of 211
Thread Starter 
ALMOST DONE WITH THIS BUILD FOR TODAY!!!! biggrin.gif

Got all the front cabling done, starting the PSU 550 cord sleeveing now! biggrin.gif



















New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › "SCORCH" BUILD Another all red AMD build. Phenom II 820 OC, Budget Build! HD5750, RED AND PINK Cathodes, Thermaltake V3 Black AMD Edition