Overclock.net › Forums › AMD › AMD CPUs › amd fx 8320 temps
New Posts  All Forums:Forum Nav:

amd fx 8320 temps

post #1 of 10
Thread Starter 
well i would like some advice on my temps i am running the amd fx 8320 and my temp at 1.5v bios 1.512v windows running prime95 my temps top out at 63 and for a h100 with push pull and pull are ultra kaze 38mm 120mm i thought my temps should be lower..

this is the guide i used to overclock http://www.overclock.net/t/1348623/amd-bulldozer-and-piledriver-overclocking-guide-asus-motherboard
post #2 of 10
I'm in the same boat with my 8320 and H100 with 2 AP-15. So I ordered 2 AP-29 and hoping it with help. I may order 2 more if it helps.
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
post #3 of 10
Thread Starter 
i dont get the temp problem i had a 6100 @ 4.6 1.55v ran fine at 53 max this is 2 extra cores yes but lower v core

what setting you using and is 4.8 prime stable ?
post #4 of 10
I'm using these settings.
CPU Multi x24
CPU Voltage 1.525v in bios
CPU Voltage 1.536v on CPU-Z under load
NB speed 2600
HT speed 2600
My cpu at 4.8ghz max out about 63c with theses setting.

EDIT
About 45 minutes in Prime95 it hits 63c, so I shut it down. Max temp safe is 61c.
Are you mix matching fans? Like Stock fan>Radiator> Kaze fan.
Edited by dixson01974 - 2/16/13 at 12:58pm
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
post #5 of 10
Thread Starter 
Quote:
Originally Posted by dixson01974 View Post

I'm using these settings.
CPU Multi x24
CPU Voltage 1.525v in bios
CPU Voltage 1.536v on CPU-Z under load
NB speed 2600
HT speed 2600
My cpu at 4.8ghz max out about 63c with theses setting.

EDIT
About 45 minutes in Prime95 it hits 63c, so I shut it down. Max temp safe is 61c.
Are you mix matching fans? Like Stock fan>Radiator> Kaze fan.

wow that is alot lower i am going to need that for 4.5 what are your llc settings and i hit 60 after 15 themn it levels out
. yes it goes stock push rad kaze.

think the higher cfm is better push then the stock
post #6 of 10
Quote:
Originally Posted by skyline_king88 View Post

wow that is alot lower i am going to need that for 4.5 what are your llc settings and i hit 60 after 15 themn it levels out
. yes it goes stock push rad kaze.

think the higher cfm is better push then the stock
Give me a minute. I need to reboot and look at my LLC settings.
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
post #7 of 10
OK. The settings I'm using on the LLC part is.
CPU LLC : Ultra High
CPU/NB LLC : High
CPU Current Capability : 130%
CPU/NB Current Capability :130%
CPU Power Phase Control : Extreme
CPU Voltage Frequency : Manual
VRM Fixed Frequency Mode : 400
Edited by dixson01974 - 2/17/13 at 11:14am
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
post #8 of 10
Thread Starter 
i am using same setting besides cpu voltage frequency is on auto... i have a jnk chip cant get higher then 4.5 with out needing more then 1.55 and i ahve found my temps in folding dont g over 50 but using prime it is way over 60.
post #9 of 10
CPU Voltage Frequency can lower your voltage. If I don't set it I need higher voltage on my CPU to make it stable. So set the CPU Voltage Frequency and try lowing your cpu voltage.
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
post #10 of 10
Quote:
Originally Posted by dixson01974 View Post

CPU Voltage Frequency can lower your voltage. If I don't set it I need higher voltage on my CPU to make it stable. So set the CPU Voltage Frequency and try lowing your cpu voltage.

Thanks for the tip, how much voltage were you able to drop after changing this?
 
Minnow
(6 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8320 ASUS Sabertooth 990FX R2.0 XFX HD 7870 GHz Core Samsung Green - 2133 10-10-10 
CoolingOSPower
Corsair H40 Windows 8 64-bit Antec HCG-900 
CPUMotherboardRAMHard Drive
Intel Pentium D 915 ASUS P5L-MX 2x2GB Corsair DDR2 Seagate 2TB 7200RPM 64MB SATA2 
OS
Windows Server 2008 
  hide details  
Reply
 
Minnow
(6 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8320 ASUS Sabertooth 990FX R2.0 XFX HD 7870 GHz Core Samsung Green - 2133 10-10-10 
CoolingOSPower
Corsair H40 Windows 8 64-bit Antec HCG-900 
CPUMotherboardRAMHard Drive
Intel Pentium D 915 ASUS P5L-MX 2x2GB Corsair DDR2 Seagate 2TB 7200RPM 64MB SATA2 
OS
Windows Server 2008 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › amd fx 8320 temps