Overclock.net › Forums › Cooling › Air Cooling › 2x 3 pin fans on PWM Y Splitter
New Posts  All Forums:Forum Nav:

2x 3 pin fans on PWM Y Splitter

post #1 of 3
Thread Starter 
Hey everyone, can anyone let me know if I can use 2x 3 pin fans with a spare Gelid PWM Y splitter cable to connect to the motherboard CPU Fan? Would this cause any issues? Im replacing my fan with two SP120's.

This is a picture of the connectors. One 3 pin fan would fill, Ground + 12VDC + Sense and leave the PWM pin blank. The second 3 pin fan would fill Ground + 12VDC only, leaving 1 spot empty on it for Sense where that pin is not present. The PWN pin again remains unoccupied.

The connection to the motherboard fills all 4 pins of course.

http://www.newegg.com/Product/Product.aspx?Item=N82E16812718001

Thanks all. This is driving me nuts!
Edited by caesu - 2/17/13 at 6:40pm
post #2 of 3
Will work fine. Of course there is no PWM control so 12v constant power to fan unless you are using voltage control.
post #3 of 3
Thread Starter 
Thank you, Im glad you can help me sort that out.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › 2x 3 pin fans on PWM Y Splitter