Overclock.net › Forums › Intel › Intel - General › I need helping overclocking past 2.39!
New Posts  All Forums:Forum Nav:

I need helping overclocking past 2.39! - Page 2

post #11 of 13
Quote:
Originally Posted by Overclock544 View Post

ok i got the ram at 1066 and the cpu at 333 x7 stable and i think that is as good as it will oc but im going to try to get a pentium e2180 and oc it to 3ghz it should oc better because it has x10 multipliers and a lower starting bus speed.

Set the ram below 1066, then increase your FSB. As you push the FSB past 333, the ram will also increase.

I would think the G41 board could do 400 FSB with a dual core.
My System
(16 items)
 
  
CPUMotherboardGraphicsRAM
6850K ASUS X99-AII eVGA GTX 1060 32Gb Team Vulcan DDR4 3000 Cas 15 
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 EVO NVME Crucial M500 Seagate HDD Samsung F3 
CoolingOSMonitorKeyboard
H100i Windows 10 Pro 64 Samsung KU6300 40" Corsair K70 Vengeance 
PowerCaseMouse
Seasonic Gold 750W Phantek Enthoo Pro M Logitech G9X 
  hide details  
Reply
My System
(16 items)
 
  
CPUMotherboardGraphicsRAM
6850K ASUS X99-AII eVGA GTX 1060 32Gb Team Vulcan DDR4 3000 Cas 15 
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 EVO NVME Crucial M500 Seagate HDD Samsung F3 
CoolingOSMonitorKeyboard
H100i Windows 10 Pro 64 Samsung KU6300 40" Corsair K70 Vengeance 
PowerCaseMouse
Seasonic Gold 750W Phantek Enthoo Pro M Logitech G9X 
  hide details  
Reply
post #12 of 13
Thread Starter 
I set the ram at 800 then set the cpu host frequency to 343 x7 and no boot then i lowered it to 342x7 and it works fine why?
post #13 of 13

It could either be a "FSB Hole", or a "FSB Wall"  A "FSB Hole" is a little bit like walking along a path and there's a hole.  If you want to get past the hole, then you have to jump past it and then try to keep going.  So, try 344, 345, 346, etc. etc.  Keep trying higher and higher FSB speeds.  If it still fails at like 350 or even all the way up to like say, 355 or something, then you may be limited to 342.  That would be the "FSB Wall" because it's like walking along a path and then you come up to a wall that you cannot get past.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › I need helping overclocking past 2.39!