Overclock.net › Forums › Cooling › Water Cooling › Cooling the GTX670 (Reference)..Custom loop V.S. H60 Mod short review. Cheap effective cooling!!
New Posts  All Forums:Forum Nav:

Cooling the GTX670 (Reference)..Custom loop V.S. H60 Mod short review. Cheap effective cooling!!

post #1 of 2
Thread Starter 
Two rigs

1) custom loop with two gtx670 in SLI with a 3770k @ 4.4Ghz...

GPU Idle 26c..Load goes up to around 50c in BF3!

2) corsair H60 push/pull Mod with 30mm fan attached to the VREG heatsink

GPU Idle 22c..Load hits around 38c in BF3

system #1 with the custom loop has one 120x2mm fan radiator and one double thick 120mm radiator...very good water blocks too..nothing cheap...all in all probably atleast $550-650 worth of fittings, blocks, res, rads, coolant...

system #2 has an H80 push pull on CPU..and an H60 push/pull on GPU with a 30mm fan on the vreg heatsink...Cost...well what around..$150 new?

So if ya dont mind voiding your warranty....and doing a little bit of modding... #2 is an awesome way to cool your GPU and CPU under water for super cheap and it works better than my custom loop!

P.S. dwood I need some brackets! the H60 is currently attached with zipties tongue.gif

Gear mentioned in this thread:

post #2 of 2
On the 2nd you have 3 seperate loops where on one you have the CPU aswell as 2 GPus.

Try a gpu only loop with your custom wcooling
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling

Gear mentioned in this thread:

Overclock.net › Forums › Cooling › Water Cooling › Cooling the GTX670 (Reference)..Custom loop V.S. H60 Mod short review. Cheap effective cooling!!