Overclock.net › Forums › Components › Monitors and Displays › Overclockable 2560x1440 PCB
New Posts  All Forums:Forum Nav:

Overclockable 2560x1440 PCB - Page 2

post #11 of 33
Quote:
Originally Posted by PCM2 View Post

The pixel responses of IPS technology, as I've been saying for a long time are not good enough to properly support 120Hz. At least not so good that manufacturers have jumped at the idea. That's why you have to 'overclock' these panels beyond their native settings. As above, you don't get the full trailing reduction benefits of the higher refresh rate as the transitions are much slower than on snappy 120Hz TN panels. Some are in fact above the threshold of 8.33ms so you don't get 120 discrete frames, either.

What's certainly noticeable and of benefit is the increased mouse polling rates you get - everything is much smoother as you interact with the game world. I'm not really sure if that would 'feel' the same at 90Hz but anybody with one of these monitors is probably going to tell you to put it as high as you can anyway. tongue.gif

Great article, and I hope I came away with the correct assumption that you want your pixel response times lower than frame transition times, which in the case of 120Hz would be 8.33ms. It would be nice to see what the results of one of these overclockable Korean or Overlord monitors would look like in that test.
post #12 of 33
That is exactly it. It would be interesting to see that, yes. They don't have particularly aggressive pixel overdrive and shouldn't really exhibit different pixel behaviour to other similar examples in the OP's table.
post #13 of 33
Quote:
Originally Posted by PCM2 View Post

That is exactly it. It would be interesting to see that, yes. They don't have particularly aggressive pixel overdrive and shouldn't really exhibit different pixel behaviour to other similar examples in the OP's table.

Having read your article, I must disagree with certain aspects.
Quote:
t 120Hz the transition time between frames is lowered to 8.33ms (1/120= 0.0083s= 8.33ms) which can increase the apparent fluidity of the image if certain other conditions are met.
It increases the apparent fluidity of the image regardless of the other conditions. 120hz operation on a 2B Catleap does little, however, to counter motion blur and ghosting. Fluidity is up, ghosting is mostly the same.
Quote:
For optimal visual performance at a 120Hz refresh rate the monitor would have to complete most pixel transitions within 8.33ms to prevent ‘frame overlap’ – with even lower values being preferable.
This is very true, and absolutely essential for 3D operation. And for optimal performance, this is true in 2D too. However, in practice, I have not noticed a serious degradation in visual performance on my 2B, even given the relatively slow transition times. Frame overlap is, in my opinion, not an issue - we already suffer from this problem! It's called ghosting.
Quote:
Even the newest IPS and PLS (Plane to Line Switching – Samsung’s version of the technology) models struggle to keep responses consistently below the 8.33ms threshold, which is the bare minimum for 120Hz to work effectively
I would say rather that IPS/PLS struggle to keep response times below 8.33ms - the bare minimum of optimal 120hz operation.

Consider this thought experiment. A white line on a black background is moving across the screen at a constant speed. It moves at a speed of 1200 pixels a second. At 60hz, your line moves across the screen in increments of 20 pixels per frame - every frame, the white line will move to the right 20 pixels, be lit for 16.7ms, then go dark as the line keeps moving right. It takes 11ms (approximate) for the line to change brightness from black to white. The ghosting persists for approximately 11ms after the fact. There will be the afterimage of 1 line for 11ms.

Let's crank up the refresh rate, yet, maintain the speed of the line. It moves at 1200 pixels a second - but there are twice the frames. Your line now moves at 10 pixels every frame - there's a new "inbetween" frame. The line moves right 10 pixels; it tries to turn to white, but doesn't quite make it there. Then it changes back to black. The response time is still 11 ms - so the image ghosts for up to 11ms (the same as at 60hz operation). But because there are twice as many frames - the movement of the line across the monitor will be twice as smooth. There may be slight artifacts with regards to colour - but in my experience... I haven't seen those artifacts when running PixPerAn at 115hz; and believe me, I was looking by using PixPerAn's pixel transition tests.

It's not something I would sell to the general public as "120hz monitors". They aren't 120hz monitors. They don't work exactly like 120hz monitors ought to work. But you can probably get 80% (WAG) of the benefit of a true 120hz monitor by running a 2B Catleap at 120hz. And you get the benefit of IPS viewing angle technology, 1440p resolution and more stable colours compared to TN.
post #14 of 33
I do feel that some aspects of the article come across as a bit negative and dismissive towards the technology. When I wrote it initially it was designed to make people appreciate some of the reasons why manufacturers aren't adopting 120Hz IPS/PLS technology and why it isn't directly comparable to 120Hz TN tech. If I were to write it today I reckon it would take a slightly different tone. I might rebalance it a bit some time when I get the chance. It isn't really all that visible on the site any more and I kind of swept it under the rug a bit. tongue.gif A more recent reflection of things can be found here - http://pcmonitors.info/forum/topic/korean-2560x1440-ips-imports#post-20900.

There are a few points in the article that really agree with what you are saying (and article aside - there are absolutely benefits to be had from 120Hz IPS).
Quote:
You might argue that even with the reduced benefit compared to their TN panel counterparts the 120Hz refresh rate is still worth it as it improves the ‘connected feeling’ compared to running the same monitor at 60Hz. Unfortunately the manufacturers seem to feel that they aren’t quite where they want to be to take their IPS and PLS to the next level. And to some extent consumer expectation doesn’t quite line up with what is achievable from the current technology.

This is essentially stressing that there is some benefit in fluidity but that manufacturers aren't happy to pump out this technology just at the moment. It isn't really a direct justification for that - it isn't optimal by any means but there is benefit to it, no doubt. The article really concludes with an unfortunate assessment of where LG are currently focussing their efforts (and it isn't 120Hz in any shape or form), though, and that perhaps PLS is a more likely candidate for this sort of thing.

And in relation to a proper/official 120Hz display of this variety:
Quote:
It might well be aimed primarily at enabling stereoscopic 3D viewing but there would be some secondary benefits such as a reduction in visible trailing and superior 2D responsiveness.

I'm also working on a much more thorough article assessing the factors affecting the responsiveness of a monitor. This will look at, amongst other things, why refresh rate alone can be so influential to a monitors response performance irrespective, to some degree, of pixel responsiveness.
Edited by PCM2 - 2/23/13 at 10:01am
post #15 of 33
Quote:
Originally Posted by PCM2 View Post

But we are talking (at least the thread poster and I when I posted the initial comment you disagreed with) about the ability to effectively support a 120Hz refresh rate in 2D. Not 3D... Stereoscopic technologies running at 120Hz essentially only need to output up to 60fps per eye.

Thats right 60fps per eye, every second. Thats 120 frames every second. Thats how tri-def works.
Quote:
On a TV this doesn't have to be 60 discrete frames of unique information and funnily enough it isn't.

Have you ever gamed in 3d? I'm talking about gaming in 3d, not movies. Do you understand how active stereoscopic 3d content is displayed on a monitor? Its two completely different images per eye. Crosstalk (ghosting) is a term used when the image for one eye bleeds into the image for the other eye. For crosstalk to not be an issue pixel response time must not be that bad.
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77X-UD5H MSI TF3 7950 Tri-fire Samsung 30nm 4x4GB 
Hard DriveOSMonitorKeyboard
Intel 320 160GB and a few samsung platters Windows7 x64 Catleap Q270 Rosewill mechanical 
PowerCaseMouseMouse Pad
Corsair AX850 Xigmatek Elysium Razer Deathadder Puretrak talent 
Audio
Xonar Essence STX 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77X-UD5H MSI TF3 7950 Tri-fire Samsung 30nm 4x4GB 
Hard DriveOSMonitorKeyboard
Intel 320 160GB and a few samsung platters Windows7 x64 Catleap Q270 Rosewill mechanical 
PowerCaseMouseMouse Pad
Corsair AX850 Xigmatek Elysium Razer Deathadder Puretrak talent 
Audio
Xonar Essence STX 
  hide details  
Reply
post #16 of 33
You're completely straying off topic here and employing a pointless patronising tone that is doing you no favours at all. As I was trying to tell you, what you are saying has no bearing whatsoever on the original post or on how suitable IPS technology is for true fluid 120Hz playback. Just take 3D out of the equation as that isn't what the point of this thread was until you decided to push things down the wrong path. My original point was simply that IPS technology, in no official capacity (TV or otherwise), currently supports true 120Hz input and output. 60Hz in each eye does not require the same level of pixel responsiveness as 120Hz. Try connecting a TV to a PC and running it in 120Hz. You can't - it's not possible, regardless of resolution.
Edited by PCM2 - 2/23/13 at 12:54pm
post #17 of 33
You completely missed my point.
Quote:
Originally Posted by PCM2 View Post

60Hz in each eye does not require the same level of pixel responsiveness as 120Hz.

That doesn't even make sense. If anything its more important.
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77X-UD5H MSI TF3 7950 Tri-fire Samsung 30nm 4x4GB 
Hard DriveOSMonitorKeyboard
Intel 320 160GB and a few samsung platters Windows7 x64 Catleap Q270 Rosewill mechanical 
PowerCaseMouseMouse Pad
Corsair AX850 Xigmatek Elysium Razer Deathadder Puretrak talent 
Audio
Xonar Essence STX 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77X-UD5H MSI TF3 7950 Tri-fire Samsung 30nm 4x4GB 
Hard DriveOSMonitorKeyboard
Intel 320 160GB and a few samsung platters Windows7 x64 Catleap Q270 Rosewill mechanical 
PowerCaseMouseMouse Pad
Corsair AX850 Xigmatek Elysium Razer Deathadder Puretrak talent 
Audio
Xonar Essence STX 
  hide details  
Reply
post #18 of 33
I've been very busy today and my mind has been elsewhere so perhaps I'm not making myself clear. Perhaps I'll wake up tomorrow and realise I have been talking complete rubbish. If not I'll let somebody else explain it to you perhaps.
Edited by PCM2 - 2/23/13 at 1:45pm
post #19 of 33
Quote:
Originally Posted by BababooeyHTJ View Post

You completely missed my point.
That doesn't even make sense. If anything its more important.

You're wrong Bababooey, just drop it.
Main
(20 items)
 
  
CPUMotherboardGraphicsRAM
4770K ASRock Z87 Extreme4 EVGA GTX 780 Ti SC Crucial Ballistix Sport DDR3-1600 
Hard DriveHard DriveOptical DriveCooling
Samsunge 850 Evo OS Drive Caviar Black 1TB Asus Prolimatech Megahalems 
OSMonitorKeyboardPower
Windows 10 Pro Asus VG24QE Filco Linear-R Tenkeyless Tagan GuardianX 1000W 
CaseMouseMouse PadAudio
Xigmatek Elysium Zowie FK Func 1030XL Creative X-Fi Titanium HD 
AudioAudioAudioAudio
AKG Q701 JDS Labs Objective2 Amp HiFiMAN HE-6 Emotiva mini-X Power Amp 
  hide details  
Reply
Main
(20 items)
 
  
CPUMotherboardGraphicsRAM
4770K ASRock Z87 Extreme4 EVGA GTX 780 Ti SC Crucial Ballistix Sport DDR3-1600 
Hard DriveHard DriveOptical DriveCooling
Samsunge 850 Evo OS Drive Caviar Black 1TB Asus Prolimatech Megahalems 
OSMonitorKeyboardPower
Windows 10 Pro Asus VG24QE Filco Linear-R Tenkeyless Tagan GuardianX 1000W 
CaseMouseMouse PadAudio
Xigmatek Elysium Zowie FK Func 1030XL Creative X-Fi Titanium HD 
AudioAudioAudioAudio
AKG Q701 JDS Labs Objective2 Amp HiFiMAN HE-6 Emotiva mini-X Power Amp 
  hide details  
Reply
post #20 of 33
You haven't explained your point at all. You're acting as if stereoscopic 3d doesn't require a separate image for each eye. It does and if the pixels don't refresh fast enough you'll see an after image. Have you ever gamed in 3d?

My point that you seem to have missed is that if a 3d tv can pull this off then the pixel response times must be better than some people give it credit for and will benefit from the higher refresh rate.
Quote:
Originally Posted by Makav3li View Post

You're wrong Bababooey, just drop it.

How so? You seem to know better. Explain how. rolleyes.gif

Either way, I'm dropping this and adding the both of you to my ignore list. thumb.gif
Edited by BababooeyHTJ - 2/23/13 at 1:08pm
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77X-UD5H MSI TF3 7950 Tri-fire Samsung 30nm 4x4GB 
Hard DriveOSMonitorKeyboard
Intel 320 160GB and a few samsung platters Windows7 x64 Catleap Q270 Rosewill mechanical 
PowerCaseMouseMouse Pad
Corsair AX850 Xigmatek Elysium Razer Deathadder Puretrak talent 
Audio
Xonar Essence STX 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77X-UD5H MSI TF3 7950 Tri-fire Samsung 30nm 4x4GB 
Hard DriveOSMonitorKeyboard
Intel 320 160GB and a few samsung platters Windows7 x64 Catleap Q270 Rosewill mechanical 
PowerCaseMouseMouse Pad
Corsair AX850 Xigmatek Elysium Razer Deathadder Puretrak talent 
Audio
Xonar Essence STX 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Monitors and Displays
Overclock.net › Forums › Components › Monitors and Displays › Overclockable 2560x1440 PCB