Overclock.net › Forums › Cooling › Water Cooling › Swiftech H220/H320/H220X/H240X/H140X and CM Glacer 240L/360L Owners' Club
New Posts  All Forums:Forum Nav:

Swiftech H220/H320/H220X/H240X/H140X and CM Glacer 240L/360L Owners' Club - Page 1980

post #19791 of 20809
Quote:
Originally Posted by wes1099 View Post

Does anyone have tips for filling the h220x? I have been trying for hours to get an air bubble out of the reservoir but it is really stuck in there and I can't get it to move to the fill port.

I always used a wash bottle (https://www.amazon.com/ACM-Economy-Bottle-Squeeze-Medical/dp/B00WTHLR2M/). You can then put the nozzle down into the reservoir area and put the fluid into the bubble area, which will force the bubble up to the fill port. It was an awful time trying to get rid of that last bubble without it.
post #19792 of 20809
Quote:
Originally Posted by ciarlatano View Post

I always used a wash bottle (https://www.amazon.com/ACM-Economy-Bottle-Squeeze-Medical/dp/B00WTHLR2M/). You can then put the nozzle down into the reservoir area and put the fluid into the bubble area, which will force the bubble up to the fill port. It was an awful time trying to get rid of that last bubble without it.
I can attest, that method works perfectly
post #19793 of 20809
Quote:
Originally Posted by ciarlatano View Post

I always used a wash bottle (https://www.amazon.com/ACM-Economy-Bottle-Squeeze-Medical/dp/B00WTHLR2M/). You can then put the nozzle down into the reservoir area and put the fluid into the bubble area, which will force the bubble up to the fill port. It was an awful time trying to get rid of that last bubble without it.

Quote:
Originally Posted by GraveDigger7878 View Post

I can attest, that method works perfectly
Sounds good. I will get one of those and try it sometime later.
    
CPUMotherboardGraphicsRAM
i5-4670k MSI Z87-G45 Gigabyte Geforce GTX 970 G1 Gaming Crucial Ballistix Sport 8gb (2x4gb) 1600mhz 9-9... 
RAMHard DriveHard DriveHard Drive
Crucial Ballistix Sport 8gb (2x4gb) 1600mhz 9-9... Crucial MX200 250gb SSD Crucial MX200 500gb SSD Random Hitachi 500gb 7200 RPM 2.5inch (salvaged... 
Hard DriveCoolingCoolingCooling
R.I.P. R̶a̶n̶d̶o̶m̶ ̶S̶e̶a̶g̶a̶t̶e̶ ̶7̶5̶0̶g̶b̶... Swiftech H220X Coollaboratory Liquid Pro (On-Die TIM) IC Diamond (IHS TIM) 
OSMonitorMonitorMonitor
Windows 8.1 Enbedded Industry Pro Acer XB240H 144hz 1080p Samsung Syncmaster 2243BWX R̶a̶n̶d̶o̶m̶ ̶D̶e̶l̶l̶ ̶1̶7̶"̶M̶o̶n̶i̶t̶o̶r̶ ̶F... 
KeyboardPowerCaseMouse
GON NerD 60 v2.0 Gateron Black Switched w/ alum... EVGA NEX750B Corsair 300r Intellimouse Explorer 3.0 Legends Edition (Dail... 
Mouse PadAudioAudioAudio
Puretrak Talent White Edition Creative Sound Blaster X-FI 5.1 USB Beyerdynamic DT 770 Pro 250Ω JDSLabs DIY O2 Headphone Amp 1/4" Output 
AudioAudioOtherOther
Sennheiser HD 558 JDSLabs DIY CmoyBB v2.03 RGB led strip + Controller (modded to use molex... 1987 IBM Model M 101 Key Buckling Spring Mechan... 
OtherOtherOtherOther
Massdrop Infinity Keyboard - Cherry MX Black Razer Deathadder 2013 Roccat Kone XTD Optical Steelseries QCK+ Natus Vincere Edition 
OtherOtherOther
Hotline Gaming 0.6mm Competition Grade PTFE Mou... CM Storm Quickfire-TK Cherry MX Blue with Custo... Royal Glam black walnut hardwood wrist rest 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5-4670k MSI Z87-G45 Gigabyte Geforce GTX 970 G1 Gaming Crucial Ballistix Sport 8gb (2x4gb) 1600mhz 9-9... 
RAMHard DriveHard DriveHard Drive
Crucial Ballistix Sport 8gb (2x4gb) 1600mhz 9-9... Crucial MX200 250gb SSD Crucial MX200 500gb SSD Random Hitachi 500gb 7200 RPM 2.5inch (salvaged... 
Hard DriveCoolingCoolingCooling
R.I.P. R̶a̶n̶d̶o̶m̶ ̶S̶e̶a̶g̶a̶t̶e̶ ̶7̶5̶0̶g̶b̶... Swiftech H220X Coollaboratory Liquid Pro (On-Die TIM) IC Diamond (IHS TIM) 
OSMonitorMonitorMonitor
Windows 8.1 Enbedded Industry Pro Acer XB240H 144hz 1080p Samsung Syncmaster 2243BWX R̶a̶n̶d̶o̶m̶ ̶D̶e̶l̶l̶ ̶1̶7̶"̶M̶o̶n̶i̶t̶o̶r̶ ̶F... 
KeyboardPowerCaseMouse
GON NerD 60 v2.0 Gateron Black Switched w/ alum... EVGA NEX750B Corsair 300r Intellimouse Explorer 3.0 Legends Edition (Dail... 
Mouse PadAudioAudioAudio
Puretrak Talent White Edition Creative Sound Blaster X-FI 5.1 USB Beyerdynamic DT 770 Pro 250Ω JDSLabs DIY O2 Headphone Amp 1/4" Output 
AudioAudioOtherOther
Sennheiser HD 558 JDSLabs DIY CmoyBB v2.03 RGB led strip + Controller (modded to use molex... 1987 IBM Model M 101 Key Buckling Spring Mechan... 
OtherOtherOtherOther
Massdrop Infinity Keyboard - Cherry MX Black Razer Deathadder 2013 Roccat Kone XTD Optical Steelseries QCK+ Natus Vincere Edition 
OtherOtherOther
Hotline Gaming 0.6mm Competition Grade PTFE Mou... CM Storm Quickfire-TK Cherry MX Blue with Custo... Royal Glam black walnut hardwood wrist rest 
  hide details  
Reply
post #19794 of 20809
Quote:
Originally Posted by ciarlatano View Post

I always used a wash bottle (https://www.amazon.com/ACM-Economy-Bottle-Squeeze-Medical/dp/B00WTHLR2M/). You can then put the nozzle down into the reservoir area and put the fluid into the bubble area, which will force the bubble up to the fill port. It was an awful time trying to get rid of that last bubble without it.
i used a syringe with a curved tip for the last little bit but now that ive replaced my window with the bleed screw...ill be getting one of these if the other pump wont force that bubble through to my res
NEWBIE
(23 items)
 
  
CPUMotherboardGraphicsGraphics
AMD 8320e Asus Sabertooth R2.0 xfx r9 290 xfx r9 290 
RAMHard DriveHard DriveHard Drive
G.Skill rip jaws  Samsung 840 Pro WD BLUE 64MB Cache Ocz vertex 3 
CoolingCoolingCoolingCooling
Swiftech h220x  alphacool nexxos st30 280mm radiator alphacool coolplex pro LT10 100mm reservoir Swiftech h220 rad only 
OSMonitorMonitorKeyboard
Windows 7 64 Bit ENTERPRISE edition Acer 23" 1080p  asus 19" Dell Media Center  
PowerCaseMouseMouse Pad
Rosewill Photon 1200W Phanteks Enthoo Pro Logitech G5 or Steel Series MW2 edition Generic Cheapy 
AudioAudioAudio
GEMINI HSR-1000 Logitech 5.1 surround ZALMAN clip on mic 
  hide details  
Reply
NEWBIE
(23 items)
 
  
CPUMotherboardGraphicsGraphics
AMD 8320e Asus Sabertooth R2.0 xfx r9 290 xfx r9 290 
RAMHard DriveHard DriveHard Drive
G.Skill rip jaws  Samsung 840 Pro WD BLUE 64MB Cache Ocz vertex 3 
CoolingCoolingCoolingCooling
Swiftech h220x  alphacool nexxos st30 280mm radiator alphacool coolplex pro LT10 100mm reservoir Swiftech h220 rad only 
OSMonitorMonitorKeyboard
Windows 7 64 Bit ENTERPRISE edition Acer 23" 1080p  asus 19" Dell Media Center  
PowerCaseMouseMouse Pad
Rosewill Photon 1200W Phanteks Enthoo Pro Logitech G5 or Steel Series MW2 edition Generic Cheapy 
AudioAudioAudio
GEMINI HSR-1000 Logitech 5.1 surround ZALMAN clip on mic 
  hide details  
Reply
post #19795 of 20809
Quote:
Originally Posted by mfknjadagr8 View Post

i used a syringe with a curved tip for the last little bit but now that ive replaced my window with the bleed screw...ill be getting one of these if the other pump wont force that bubble through to my res
As I have said before I only use a funnel and cycle the power on and off and it works great so far. I turn the power to the pump on and it runs, but when I shut it off air jumps to the fill hole. I leave a little distilled in the funnel as I am doing this but this method works great so far.
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
post #19796 of 20809
Quote:
Originally Posted by Madmaxneo View Post

As I have said before I only use a funnel and cycle the power on and off and it works great so far. I turn the power to the pump on and it runs, but when I shut it off air jumps to the fill hole. I leave a little distilled in the funnel as I am doing this but this method works great so far.
i fill my loop up 100 percent...i dont leave air gaps at the top of my secondary res...i like to be able to look at the res and ensure i havent lost any water anywhere...the only problem with cycling like that is it can introduce mocro bubbles into the impeller...but without help this is imo the best way as well...im going to try when filling this time to have a continuous pour and not have to cycle...hoping this allows air to fill blocks/rads uniformly and make bleeding easier...we will see...
NEWBIE
(23 items)
 
  
CPUMotherboardGraphicsGraphics
AMD 8320e Asus Sabertooth R2.0 xfx r9 290 xfx r9 290 
RAMHard DriveHard DriveHard Drive
G.Skill rip jaws  Samsung 840 Pro WD BLUE 64MB Cache Ocz vertex 3 
CoolingCoolingCoolingCooling
Swiftech h220x  alphacool nexxos st30 280mm radiator alphacool coolplex pro LT10 100mm reservoir Swiftech h220 rad only 
OSMonitorMonitorKeyboard
Windows 7 64 Bit ENTERPRISE edition Acer 23" 1080p  asus 19" Dell Media Center  
PowerCaseMouseMouse Pad
Rosewill Photon 1200W Phanteks Enthoo Pro Logitech G5 or Steel Series MW2 edition Generic Cheapy 
AudioAudioAudio
GEMINI HSR-1000 Logitech 5.1 surround ZALMAN clip on mic 
  hide details  
Reply
NEWBIE
(23 items)
 
  
CPUMotherboardGraphicsGraphics
AMD 8320e Asus Sabertooth R2.0 xfx r9 290 xfx r9 290 
RAMHard DriveHard DriveHard Drive
G.Skill rip jaws  Samsung 840 Pro WD BLUE 64MB Cache Ocz vertex 3 
CoolingCoolingCoolingCooling
Swiftech h220x  alphacool nexxos st30 280mm radiator alphacool coolplex pro LT10 100mm reservoir Swiftech h220 rad only 
OSMonitorMonitorKeyboard
Windows 7 64 Bit ENTERPRISE edition Acer 23" 1080p  asus 19" Dell Media Center  
PowerCaseMouseMouse Pad
Rosewill Photon 1200W Phanteks Enthoo Pro Logitech G5 or Steel Series MW2 edition Generic Cheapy 
AudioAudioAudio
GEMINI HSR-1000 Logitech 5.1 surround ZALMAN clip on mic 
  hide details  
Reply
post #19797 of 20809
Quote:
Originally Posted by mfknjadagr8 View Post

i fill my loop up 100 percent...i dont leave air gaps at the top of my secondary res...i like to be able to look at the res and ensure i havent lost any water anywhere...the only problem with cycling like that is it can introduce mocro bubbles into the impeller...but without help this is imo the best way as well...im going to try when filling this time to have a continuous pour and not have to cycle...hoping this allows air to fill blocks/rads uniformly and make bleeding easier...we will see...
There are no micro bubbles in my loop. After I believe the loop is full I seal the unit and turn it upside down and every which way to make sure. It has worked great so far. But I do not have a second res, I just use my 240X with my CPU. When I get a 1080Ti I want one with a water block. I will have that on a separate loop. Not sure yet what I am going to use in this second loop as it can't be one of the Swictech AIOs because it will be mounted on the bottom of the case.
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
post #19798 of 20809
Quote:
Originally Posted by Madmaxneo View Post

There are no micro bubbles in my loop. After I believe the loop is full I seal the unit and turn it upside down and every which way to make sure. It has worked great so far. But I do not have a second res, I just use my 240X with my CPU. When I get a 1080Ti I want one with a water block. I will have that on a separate loop. Not sure yet what I am going to use in this second loop as it can't be one of the Swictech AIOs because it will be mounted on the bottom of the case.
things change when you have more rads and blocks and fittings...
NEWBIE
(23 items)
 
  
CPUMotherboardGraphicsGraphics
AMD 8320e Asus Sabertooth R2.0 xfx r9 290 xfx r9 290 
RAMHard DriveHard DriveHard Drive
G.Skill rip jaws  Samsung 840 Pro WD BLUE 64MB Cache Ocz vertex 3 
CoolingCoolingCoolingCooling
Swiftech h220x  alphacool nexxos st30 280mm radiator alphacool coolplex pro LT10 100mm reservoir Swiftech h220 rad only 
OSMonitorMonitorKeyboard
Windows 7 64 Bit ENTERPRISE edition Acer 23" 1080p  asus 19" Dell Media Center  
PowerCaseMouseMouse Pad
Rosewill Photon 1200W Phanteks Enthoo Pro Logitech G5 or Steel Series MW2 edition Generic Cheapy 
AudioAudioAudio
GEMINI HSR-1000 Logitech 5.1 surround ZALMAN clip on mic 
  hide details  
Reply
NEWBIE
(23 items)
 
  
CPUMotherboardGraphicsGraphics
AMD 8320e Asus Sabertooth R2.0 xfx r9 290 xfx r9 290 
RAMHard DriveHard DriveHard Drive
G.Skill rip jaws  Samsung 840 Pro WD BLUE 64MB Cache Ocz vertex 3 
CoolingCoolingCoolingCooling
Swiftech h220x  alphacool nexxos st30 280mm radiator alphacool coolplex pro LT10 100mm reservoir Swiftech h220 rad only 
OSMonitorMonitorKeyboard
Windows 7 64 Bit ENTERPRISE edition Acer 23" 1080p  asus 19" Dell Media Center  
PowerCaseMouseMouse Pad
Rosewill Photon 1200W Phanteks Enthoo Pro Logitech G5 or Steel Series MW2 edition Generic Cheapy 
AudioAudioAudio
GEMINI HSR-1000 Logitech 5.1 surround ZALMAN clip on mic 
  hide details  
Reply
post #19799 of 20809
Quote:
Originally Posted by mfknjadagr8 View Post

things change when you have more rads and blocks and fittings...
Yeah so I figured, which is why I am planning on a separate loop for my GPU(s). I want to also cool the MB but I really do not see how it would make any kind of difference since my 4930k is limited to 4.3 ghz max OC and I run that perfectly fine with the set up I have now. Consequently I am unable to run 4.4 ghz for more than a few minutes and I get a BSOD.
If I do end up using the intel tuning plan to replace my cpu and the replacement works better, I may then cool the MB and will probably combine that in the loop with the CPU but with quick disconnects.

Though at that point I would probably need a second res to make filling and draining easier.
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
post #19800 of 20809
So I've now got a brand new H240x2 prestige which I'm more than happy with but I'm already thinking of expanding it. When it comes to watercooling I've only used AIO's before but from what I understand my prestige model has quick disconnects so adding in a GPU block and radiator should be really simple? The only thing is I can't find a guide on how to disconnect the tube from the waterblock so I was wondering if I could get some advice on here.
    
CPUMotherboardGraphicsRAM
Core i5 6400 @ 4.8 ghz Delidded  Asus ROG Z170 Maximus viii ranger MSI GTX 1070 Gaming X x2 SLI 16GB Corsair Vengeance DDR4-2133 @ 2900 mhz 
Hard DriveHard DriveHard DriveCooling
WD Blue 3TB Patriot Blast 480GB SATA 3 SSD Samsung 950 Pro 512gb M.2 PCI-E 3.0 x4 Swiftech H240x2 Prestige 
OSMonitorKeyboardPower
Windows 10 x64 LG OLED65E6P Saitek Eclipse II EVGA SuperNOVA 650 G2 
CaseMouseMouse PadAudio
Corsair Obsidian 750D Logitech G500 Steelpad 5L  Audioengine HD6 Speakers  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i5 6400 @ 4.8 ghz Delidded  Asus ROG Z170 Maximus viii ranger MSI GTX 1070 Gaming X x2 SLI 16GB Corsair Vengeance DDR4-2133 @ 2900 mhz 
Hard DriveHard DriveHard DriveCooling
WD Blue 3TB Patriot Blast 480GB SATA 3 SSD Samsung 950 Pro 512gb M.2 PCI-E 3.0 x4 Swiftech H240x2 Prestige 
OSMonitorKeyboardPower
Windows 10 x64 LG OLED65E6P Saitek Eclipse II EVGA SuperNOVA 650 G2 
CaseMouseMouse PadAudio
Corsair Obsidian 750D Logitech G500 Steelpad 5L  Audioengine HD6 Speakers  
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Swiftech H220/H320/H220X/H240X/H140X and CM Glacer 240L/360L Owners' Club