Overclock.net › Forums › Cooling › Water Cooling › Swiftech H220/H320/H220X/H240X/H140X and CM Glacer 240L/360L Owners' Club
New Posts  All Forums:Forum Nav:

Swiftech H220/H320/H220X/H240X/H140X and CM Glacer 240L/360L Owners' Club - Page 342

post #3411 of 20767
Quote:
Originally Posted by BramSLI1 View Post

Let me check on this course of action before you try to attempt it. This doesn't sound like good idea to me. I'll have an answer for you soon. Update: In speaking with Stephen removing the bracket from the pump is going to be impossible with the back plate still attached. He suggests using a pair of needle-nosed pliers like these . Make sure they have the teeth on them because this will give you the grip you'll need to turn the screws. Let me know if this helps to remove these screws.

i would suggest mole grips will be much better than needle nose pliers

edit--just in case they arent called mole grips in the usa

http://www.stanleytools.co.uk/category/147531
Edited by mcnumpty23 - 5/30/13 at 3:54pm
post #3412 of 20767
Quote:
Originally Posted by mesasone View Post

A reservoir is not necessary. They make filling, bleeding, and monitoring the coolant level loop easier, but are in no way required.

The H220 pump has been shown to be able to handle several rads and components in the same loop, so you should be fine. But if you're not going to use the 240mm rad that comes with the H220, The Apogee Drive II might be the better buy. In either case, a 480mm rad seems a tad bit excessive to cool a single CPU, but if that's how you want to go more power to you!
Thanks for answering. The reasoning behind the 480 is it will be in a caselabs SM8 and I want a 480 both on top and bottom simply for aesthetics. After reading all day today though I've ditched the H220 and Apogee setups and probably go with the Swiftech MCP35X2 Pump along with a large reservoir.
Quote:
Originally Posted by Avonosac View Post

You are planning to not have an air catch at the very least? Even a simple T-fitting with extra tubing and a cap is essentially a reservoir.
I was going to have a fill port on top with a T but I've changed my mind as I'm learning.
 
Quadcore P182
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q9300 ASUS P5E64 WS Evolution X48 Gigabyte GeForce GTX 560 Ti Kingston HyperX 8GB DDR3 1600 
Hard DriveCoolingOSMonitor
Western Digital 300GB VelociRaptor Arctic Cooling Freezer 7 Pro Windows 7 Ultimate x64 (2) Acer 22" LCD's 
PowerCase
PC Power & Cooling S75QB 750W Antec P182 Gunmetal 
  hide details  
Reply
 
Quadcore P182
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q9300 ASUS P5E64 WS Evolution X48 Gigabyte GeForce GTX 560 Ti Kingston HyperX 8GB DDR3 1600 
Hard DriveCoolingOSMonitor
Western Digital 300GB VelociRaptor Arctic Cooling Freezer 7 Pro Windows 7 Ultimate x64 (2) Acer 22" LCD's 
PowerCase
PC Power & Cooling S75QB 750W Antec P182 Gunmetal 
  hide details  
Reply
post #3413 of 20767
Ordered it on NCIX.CA may the 25, no sigh of it yet.

How long will I wait? It's been out of stock at newegg.ca/com,ncix.ca/com, swiftech.com. SSD is here, ram is here... waiting for haswell tog et released and I'll be all set.
post #3414 of 20767
Quote:
Originally Posted by kingduqc View Post

Ordered it on NCIX.CA may the 25, no sigh of it yet.

How long will I wait? It's been out of stock at newegg.ca/com,ncix.ca/com, swiftech.com. SSD is here, ram is here... waiting for haswell tog et released and I'll be all set.
They had stock come in May 6th and sold out May 13th. They only had 10-15 on hand.
Currently a back log of orders, stock is for June 20 (Estimated)
Best to contact NCIX directly too see where you are on the list.
    
CPUMotherboardGraphicsRAM
Intel 3770k @ 4.2Ghz Asus Z77 Sabertooth EVGA GTX1060 3GB Crucial Ballistix Tactical 16GB BLT2K8G3D1608ET... 
Hard DriveHard DriveHard DriveHard Drive
Crucial MX100 512GB Corsair Force 115GB WD Green 1TB WD Green 2TB 
CoolingOSMonitorKeyboard
Cryorig C1 + XT140 Win7 64 Home SP1 ASUS VE278Q CM Storm Trigger Brown Switch 
PowerCaseMouseMouse Pad
Corsair AX650 NZXT S340 Logitech G500 Razer Goliathus Extended Mouse Pad - Speed 
AudioAudioAudioAudio
Audiotrak Prodigy Cube DAC Edifier S330D 2.1 Speaker Bose AE2 Headphone Superlux 668B Headphone 
AudioAudioOtherOther
Logitech UE 4000 Headphone Sennheiser PC320 Headset MX-4 Thermal Paste (CPU/GPU) 3x 140mm Noctua NF-P14s Redux 1200rpm PWM 
OtherOther
1x 120mm Noctua NF-S12B Redux 1200rpm PWM NZXT 2m Sleeved White LED 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel 3770k @ 4.2Ghz Asus Z77 Sabertooth EVGA GTX1060 3GB Crucial Ballistix Tactical 16GB BLT2K8G3D1608ET... 
Hard DriveHard DriveHard DriveHard Drive
Crucial MX100 512GB Corsair Force 115GB WD Green 1TB WD Green 2TB 
CoolingOSMonitorKeyboard
Cryorig C1 + XT140 Win7 64 Home SP1 ASUS VE278Q CM Storm Trigger Brown Switch 
PowerCaseMouseMouse Pad
Corsair AX650 NZXT S340 Logitech G500 Razer Goliathus Extended Mouse Pad - Speed 
AudioAudioAudioAudio
Audiotrak Prodigy Cube DAC Edifier S330D 2.1 Speaker Bose AE2 Headphone Superlux 668B Headphone 
AudioAudioOtherOther
Logitech UE 4000 Headphone Sennheiser PC320 Headset MX-4 Thermal Paste (CPU/GPU) 3x 140mm Noctua NF-P14s Redux 1200rpm PWM 
OtherOther
1x 120mm Noctua NF-S12B Redux 1200rpm PWM NZXT 2m Sleeved White LED 
  hide details  
Reply
post #3415 of 20767
Quote:
Originally Posted by mcnumpty23 View Post

i would suggest mole grips will be much better than needle nose pliers

edit--just in case they arent called mole grips in the usa

http://www.stanleytools.co.uk/category/147531

vise grips in the US thumb.gif

just know that these will more than likely mar the painted finish on anything. Sounds like the screws are already in poor condition though.
 
Work Rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-2700k @ 4.5GHz  Asus P8Z68-V/Gen3 Asus GTX 1070 Strix OC G.Skill Ripjaws 16GB 
Hard DriveCoolingOSKeyboard
Crucial M4 128GB + 1TB F3 + Crucial M500 256GB Noctua NH-D15S Windows 10 Pro Cooler Master Novatouch TKL 
PowerCaseMouseMouse Pad
Cooler Master V1000 600T SE Roccat Kone XTD Steel Series 9HD 
CPUMotherboardGraphicsRAM
i7 950 Rampage III Gene 2x EVGA GTX 680 SLI 24gb HyperX 
Hard DriveCoolingOSMonitor
960GB Crucial M500 Intel Stock Windows 7 64bit Enterprise HP ZR2440w + Z24i 
KeyboardPowerCase
Ducky Brown Antec TP-750 Antec Sonata 
  hide details  
Reply
 
Work Rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-2700k @ 4.5GHz  Asus P8Z68-V/Gen3 Asus GTX 1070 Strix OC G.Skill Ripjaws 16GB 
Hard DriveCoolingOSKeyboard
Crucial M4 128GB + 1TB F3 + Crucial M500 256GB Noctua NH-D15S Windows 10 Pro Cooler Master Novatouch TKL 
PowerCaseMouseMouse Pad
Cooler Master V1000 600T SE Roccat Kone XTD Steel Series 9HD 
CPUMotherboardGraphicsRAM
i7 950 Rampage III Gene 2x EVGA GTX 680 SLI 24gb HyperX 
Hard DriveCoolingOSMonitor
960GB Crucial M500 Intel Stock Windows 7 64bit Enterprise HP ZR2440w + Z24i 
KeyboardPowerCase
Ducky Brown Antec TP-750 Antec Sonata 
  hide details  
Reply
post #3416 of 20767
Quote:
Originally Posted by ez12a View Post

vise grips in the US thumb.gif

just know that these will more than likely mar the painted finish on anything. Sounds like the screws are already in poor condition though.

Just a little tool info, Vice Grips is a brand name, the actual tool are known as locking pliers. I am here to teach the world a little bit about everything. biggrin.gif
Gaming
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel 3500k @ 4.6 1.25v Z77A-GD65 (MS-7751) Asus GTX 770 SLI Asus GTX 770 
RAMHard DriveHard DriveOptical Drive
Corsair Vengeance DDR3 1600 Samsung 840 Sandisk Ultra Plus Pioneer DVD 
CoolingOSMonitorPower
Cooler Master 212 EVO Windows Ultimate 64 Qnix QX2710 Cooler Master V700 
CaseMouseMouse PadAudio
NZXT Phantom 630 Razor Deathadder Roccat Taito Asus Xonar DSX 
Other
Logitech Z5300E 
  hide details  
Reply
Gaming
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel 3500k @ 4.6 1.25v Z77A-GD65 (MS-7751) Asus GTX 770 SLI Asus GTX 770 
RAMHard DriveHard DriveOptical Drive
Corsair Vengeance DDR3 1600 Samsung 840 Sandisk Ultra Plus Pioneer DVD 
CoolingOSMonitorPower
Cooler Master 212 EVO Windows Ultimate 64 Qnix QX2710 Cooler Master V700 
CaseMouseMouse PadAudio
NZXT Phantom 630 Razor Deathadder Roccat Taito Asus Xonar DSX 
Other
Logitech Z5300E 
  hide details  
Reply
post #3417 of 20767
Oh yay!
Nav's Intel
(14 items)
 
Nav Platform
(13 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE @ 4.0 GHz/1.39v} Asus Crosshair IV Formula MSI 7870 Twin Frozer III Crossfire 16gb Gskill Ripjaws X-1600{9-9-9-24} 
Hard DriveOSMonitorKeyboard
WD 1TB Black/750GB Black Windows 7 64bit Pro ASUS 23.6/1920X1080 Razer 
PowerCaseMouse
Seasonic x750gold Lian Li Lancool PC-K63 Razer Death Adder 
  hide details  
Reply
Nav's Intel
(14 items)
 
Nav Platform
(13 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE @ 4.0 GHz/1.39v} Asus Crosshair IV Formula MSI 7870 Twin Frozer III Crossfire 16gb Gskill Ripjaws X-1600{9-9-9-24} 
Hard DriveOSMonitorKeyboard
WD 1TB Black/750GB Black Windows 7 64bit Pro ASUS 23.6/1920X1080 Razer 
PowerCaseMouse
Seasonic x750gold Lian Li Lancool PC-K63 Razer Death Adder 
  hide details  
Reply
post #3418 of 20767
Hey, does anyone know if my Zalman Z9 can fit a Swiftech H220? I might get it when I upgrade motherboard to something I can overclock on. If not I'll consider adding a second fan to my Hyper 212 EVO. I've seen other cases with the same dimensions as mine but I'm not sure if I could get the H220 to fit in my case with the motherboard in without interferign with the RAM placement and 8-pin connector.

http://www.zalman.com/global/product/Product_Read.php?Idx=422
Deadpool
(16 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-6700k at 4.7 GHz Asus Sabertooth Z170 EVGA GTX 1080 FTW Corsair Dominator Platinum DDR4-3000 16 GB 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Pro 512 GB SSD Western Digital Caviar Blue 1 TB HDD Asus Blu Ray Drive Corsair H115i 
CoolingCoolingOSKeyboard
2 Noctua NF-A14 Radiator Fans 3 Noctua NF-S12A PWM Airflow Fans Windows 10 64-bit Corsair Vengeance K70 
PowerCaseMouseAudio
EVGA SuperNova P2 750W Corsair Vengeance C70 Corsair M95 Corsair Vengeance 1500 v2 
  hide details  
Reply
Deadpool
(16 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-6700k at 4.7 GHz Asus Sabertooth Z170 EVGA GTX 1080 FTW Corsair Dominator Platinum DDR4-3000 16 GB 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Pro 512 GB SSD Western Digital Caviar Blue 1 TB HDD Asus Blu Ray Drive Corsair H115i 
CoolingCoolingOSKeyboard
2 Noctua NF-A14 Radiator Fans 3 Noctua NF-S12A PWM Airflow Fans Windows 10 64-bit Corsair Vengeance K70 
PowerCaseMouseAudio
EVGA SuperNova P2 750W Corsair Vengeance C70 Corsair M95 Corsair Vengeance 1500 v2 
  hide details  
Reply
post #3419 of 20767
Quote:
Originally Posted by CannedBullets View Post

Hey, does anyone know if my Zalman Z9 can fit a Swiftech H220? I might get it when I upgrade motherboard to something I can overclock on. If not I'll consider adding a second fan to my Hyper 212 EVO. I've seen other cases with the same dimensions as mine but I'm not sure if I could get the H220 to fit in my case with the motherboard in without interferign with the RAM placement and 8-pin connector.

http://www.zalman.com/global/product/Product_Read.php?Idx=422

not without modification. This guy had to cut the z9 to fit a h100 which is smaller.

http://www.overclock.net/t/1375769/fitting-the-corsair-h100-on-zalman-z9-series-guide
 
Work Rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-2700k @ 4.5GHz  Asus P8Z68-V/Gen3 Asus GTX 1070 Strix OC G.Skill Ripjaws 16GB 
Hard DriveCoolingOSKeyboard
Crucial M4 128GB + 1TB F3 + Crucial M500 256GB Noctua NH-D15S Windows 10 Pro Cooler Master Novatouch TKL 
PowerCaseMouseMouse Pad
Cooler Master V1000 600T SE Roccat Kone XTD Steel Series 9HD 
CPUMotherboardGraphicsRAM
i7 950 Rampage III Gene 2x EVGA GTX 680 SLI 24gb HyperX 
Hard DriveCoolingOSMonitor
960GB Crucial M500 Intel Stock Windows 7 64bit Enterprise HP ZR2440w + Z24i 
KeyboardPowerCase
Ducky Brown Antec TP-750 Antec Sonata 
  hide details  
Reply
 
Work Rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-2700k @ 4.5GHz  Asus P8Z68-V/Gen3 Asus GTX 1070 Strix OC G.Skill Ripjaws 16GB 
Hard DriveCoolingOSKeyboard
Crucial M4 128GB + 1TB F3 + Crucial M500 256GB Noctua NH-D15S Windows 10 Pro Cooler Master Novatouch TKL 
PowerCaseMouseMouse Pad
Cooler Master V1000 600T SE Roccat Kone XTD Steel Series 9HD 
CPUMotherboardGraphicsRAM
i7 950 Rampage III Gene 2x EVGA GTX 680 SLI 24gb HyperX 
Hard DriveCoolingOSMonitor
960GB Crucial M500 Intel Stock Windows 7 64bit Enterprise HP ZR2440w + Z24i 
KeyboardPowerCase
Ducky Brown Antec TP-750 Antec Sonata 
  hide details  
Reply
post #3420 of 20767
Quote:
Originally Posted by ez12a View Post

not without modification. This guy had to cut the z9 to fit a h100 which is smaller.

http://www.overclock.net/t/1375769/fitting-the-corsair-h100-on-zalman-z9-series-guide

What about a Corsair H80? Or is there a Corsair club I should ask or should I make another thread?
Deadpool
(16 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-6700k at 4.7 GHz Asus Sabertooth Z170 EVGA GTX 1080 FTW Corsair Dominator Platinum DDR4-3000 16 GB 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Pro 512 GB SSD Western Digital Caviar Blue 1 TB HDD Asus Blu Ray Drive Corsair H115i 
CoolingCoolingOSKeyboard
2 Noctua NF-A14 Radiator Fans 3 Noctua NF-S12A PWM Airflow Fans Windows 10 64-bit Corsair Vengeance K70 
PowerCaseMouseAudio
EVGA SuperNova P2 750W Corsair Vengeance C70 Corsair M95 Corsair Vengeance 1500 v2 
  hide details  
Reply
Deadpool
(16 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-6700k at 4.7 GHz Asus Sabertooth Z170 EVGA GTX 1080 FTW Corsair Dominator Platinum DDR4-3000 16 GB 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Pro 512 GB SSD Western Digital Caviar Blue 1 TB HDD Asus Blu Ray Drive Corsair H115i 
CoolingCoolingOSKeyboard
2 Noctua NF-A14 Radiator Fans 3 Noctua NF-S12A PWM Airflow Fans Windows 10 64-bit Corsair Vengeance K70 
PowerCaseMouseAudio
EVGA SuperNova P2 750W Corsair Vengeance C70 Corsair M95 Corsair Vengeance 1500 v2 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Swiftech H220/H320/H220X/H240X/H140X and CM Glacer 240L/360L Owners' Club