Overclock.net › Forums › Cooling › Water Cooling › Swiftech H220/H320/H220X/H240X/H140X and CM Glacer 240L/360L Owners' Club
New Posts  All Forums:Forum Nav:

Swiftech H220/H320/H220X/H240X/H140X and CM Glacer 240L/360L Owners' Club - Page 576

post #5751 of 20223
Quote:
Originally Posted by Phelan View Post

Yep, no prob. But if 2 of those blocks are GPUs, be sure to set them up in parallel, not serial, so you have much better flow.

On a side note, 3 blocks +rads will most likely make the system difficult to bleed. Just something to be aware of.
post #5752 of 20223
Quote:
Originally Posted by Gabrielzm View Post

Yes, that would be ok. But notice that the minimum rpm in the pump should be around 1200 rpm. So, between 10% to 20% PWM you shouldn't see much difference in the actual rpm of the pump. But at this rpm the pump should be very very quite. If not either the pump/barbs is touching something in the case/MB or you have bubbles in it...

ok thanks.

I'm going to solve my bubbles issue by installing new much shorter tubing this week (the original tubing is way too long for the bitfenix prodigy and doesn't look great but too loose).

I keep you posted.
    
CPUMotherboardGraphicsRAM
i5 2500k @ 4.6ghz Asus P8Z77-I Deluxe Zotac reference GTX 980 G.Skill Ares 8gb (2x4gb) ddr3-1600 
Hard DriveCoolingOSMonitor
Samsung 840 Pro 256gb Thermalright TS140 Power w/ Noctua NFA15 PWM Windows 10 Pro 64 BenQ XL2411T 
KeyboardPowerCaseMouse
Topre Realforce 88UB, Topre Realforce 23UB, Vor... Seasonic G-Series 550W modded w/ BeQuiet fan Fractal Design Node 304 w/ BeQuiet fans Zowie-BenQ FK2 w/ Zowie Camade 
Mouse PadAudioAudio
Aorus P3X, Artisan Hien XSOFT Fiio Olympus E10K Sennheiser HD 380 Pro, ModMic 4.0, Logitech Z623 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5 2500k @ 4.6ghz Asus P8Z77-I Deluxe Zotac reference GTX 980 G.Skill Ares 8gb (2x4gb) ddr3-1600 
Hard DriveCoolingOSMonitor
Samsung 840 Pro 256gb Thermalright TS140 Power w/ Noctua NFA15 PWM Windows 10 Pro 64 BenQ XL2411T 
KeyboardPowerCaseMouse
Topre Realforce 88UB, Topre Realforce 23UB, Vor... Seasonic G-Series 550W modded w/ BeQuiet fan Fractal Design Node 304 w/ BeQuiet fans Zowie-BenQ FK2 w/ Zowie Camade 
Mouse PadAudioAudio
Aorus P3X, Artisan Hien XSOFT Fiio Olympus E10K Sennheiser HD 380 Pro, ModMic 4.0, Logitech Z623 
  hide details  
Reply
post #5753 of 20223
Quote:
Originally Posted by Sp33d Junki3 View Post

The H220 do not go past the ODD bay if use on the top. You have the H220 vertical.
You could use a 120/140 maybe a 180 or 200mm rad in front.

I think you aren't noticing the second rad that is up top, with the H220 rad up front.
Nightrider
(17 items)
 
Commodore 64
(10 items)
 
 
CPUMotherboardGraphicsRAM
3930k x79 gd45 PLUS GTX Titan Crucial Ballistix Sport VLP  
Hard DriveHard DriveHard DriveCooling
HyperX 3k Intel 320 Seagate Barracuda Swifttech H220 
CoolingCoolingOSOS
Swifttech 220QP Corsair SP120 Windows 8.1 Pro Windows 10 Pro 
OSOSMonitorMonitor
Windows 7 Home Ubuntu 15.4 QNIX 2710 Catleap 2B 
Keyboard
Ducky - Cherry MX Red 
CPUMotherboardGraphicsRAM
3570k DZ77GA - 70K GTX670-DC2-4GD5  MV-3V4G3D/US 
Hard DriveCoolingOSOS
HyperX 3k CM 212 + Win 7 64 ubuntu 
PowerCase
Seventeam 850w modular CS-NT-ZERO-2  
  hide details  
Reply
Nightrider
(17 items)
 
Commodore 64
(10 items)
 
 
CPUMotherboardGraphicsRAM
3930k x79 gd45 PLUS GTX Titan Crucial Ballistix Sport VLP  
Hard DriveHard DriveHard DriveCooling
HyperX 3k Intel 320 Seagate Barracuda Swifttech H220 
CoolingCoolingOSOS
Swifttech 220QP Corsair SP120 Windows 8.1 Pro Windows 10 Pro 
OSOSMonitorMonitor
Windows 7 Home Ubuntu 15.4 QNIX 2710 Catleap 2B 
Keyboard
Ducky - Cherry MX Red 
CPUMotherboardGraphicsRAM
3570k DZ77GA - 70K GTX670-DC2-4GD5  MV-3V4G3D/US 
Hard DriveCoolingOSOS
HyperX 3k CM 212 + Win 7 64 ubuntu 
PowerCase
Seventeam 850w modular CS-NT-ZERO-2  
  hide details  
Reply
post #5754 of 20223
Quote:
Originally Posted by Avonosac View Post


I think you aren't noticing the second rad that is up top, with the H220 rad up front.
I did notice. You can mount the H220 on top and a different rad at front.
    
CPUMotherboardGraphicsRAM
Intel 3770k @ 4.2Ghz Asus Z77 Sabertooth EVGA GTX1060 3GB Crucial Ballistix Tactical 16GB BLT2K8G3D1608ET... 
Hard DriveHard DriveHard DriveHard Drive
Crucial MX100 512GB Corsair Force 115GB WD Green 1TB WD Green 2TB 
CoolingOSMonitorKeyboard
Cryorig C1 + XT140 Win7 64 Home SP1 ASUS VE278Q CM Storm Trigger Brown Switch 
PowerCaseMouseMouse Pad
Corsair AX650 NZXT S340 Logitech G500 Razer Goliathus Extended Mouse Pad - Speed 
AudioAudioAudioAudio
Audiotrak Prodigy Cube DAC Edifier S330D 2.1 Speaker Bose AE2 Headphone Superlux 668B Headphone 
AudioAudioOtherOther
Logitech UE 4000 Headphone Sennheiser PC320 Headset MX-4 Thermal Paste (CPU/GPU) 3x 140mm Noctua NF-P14s Redux 1200rpm PWM 
OtherOther
1x 120mm Noctua NF-S12B Redux 1200rpm PWM NZXT 2m Sleeved White LED 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel 3770k @ 4.2Ghz Asus Z77 Sabertooth EVGA GTX1060 3GB Crucial Ballistix Tactical 16GB BLT2K8G3D1608ET... 
Hard DriveHard DriveHard DriveHard Drive
Crucial MX100 512GB Corsair Force 115GB WD Green 1TB WD Green 2TB 
CoolingOSMonitorKeyboard
Cryorig C1 + XT140 Win7 64 Home SP1 ASUS VE278Q CM Storm Trigger Brown Switch 
PowerCaseMouseMouse Pad
Corsair AX650 NZXT S340 Logitech G500 Razer Goliathus Extended Mouse Pad - Speed 
AudioAudioAudioAudio
Audiotrak Prodigy Cube DAC Edifier S330D 2.1 Speaker Bose AE2 Headphone Superlux 668B Headphone 
AudioAudioOtherOther
Logitech UE 4000 Headphone Sennheiser PC320 Headset MX-4 Thermal Paste (CPU/GPU) 3x 140mm Noctua NF-P14s Redux 1200rpm PWM 
OtherOther
1x 120mm Noctua NF-S12B Redux 1200rpm PWM NZXT 2m Sleeved White LED 
  hide details  
Reply
post #5755 of 20223
Quote:
Originally Posted by Sp33d Junki3 View Post

I did notice. You can mount the H220 on top and a different rad at front.

Won't fit, unless you are talking a single fan rad. As it is, the only way to get both in the box was to have the top fans out of the case with fan shrouds blowing in from the top. Either the swivel barbs, or the res or the other radiator's ports got in the way of having both rads fit with everything inside and having a back exhaust fan.
Nightrider
(17 items)
 
Commodore 64
(10 items)
 
 
CPUMotherboardGraphicsRAM
3930k x79 gd45 PLUS GTX Titan Crucial Ballistix Sport VLP  
Hard DriveHard DriveHard DriveCooling
HyperX 3k Intel 320 Seagate Barracuda Swifttech H220 
CoolingCoolingOSOS
Swifttech 220QP Corsair SP120 Windows 8.1 Pro Windows 10 Pro 
OSOSMonitorMonitor
Windows 7 Home Ubuntu 15.4 QNIX 2710 Catleap 2B 
Keyboard
Ducky - Cherry MX Red 
CPUMotherboardGraphicsRAM
3570k DZ77GA - 70K GTX670-DC2-4GD5  MV-3V4G3D/US 
Hard DriveCoolingOSOS
HyperX 3k CM 212 + Win 7 64 ubuntu 
PowerCase
Seventeam 850w modular CS-NT-ZERO-2  
  hide details  
Reply
Nightrider
(17 items)
 
Commodore 64
(10 items)
 
 
CPUMotherboardGraphicsRAM
3930k x79 gd45 PLUS GTX Titan Crucial Ballistix Sport VLP  
Hard DriveHard DriveHard DriveCooling
HyperX 3k Intel 320 Seagate Barracuda Swifttech H220 
CoolingCoolingOSOS
Swifttech 220QP Corsair SP120 Windows 8.1 Pro Windows 10 Pro 
OSOSMonitorMonitor
Windows 7 Home Ubuntu 15.4 QNIX 2710 Catleap 2B 
Keyboard
Ducky - Cherry MX Red 
CPUMotherboardGraphicsRAM
3570k DZ77GA - 70K GTX670-DC2-4GD5  MV-3V4G3D/US 
Hard DriveCoolingOSOS
HyperX 3k CM 212 + Win 7 64 ubuntu 
PowerCase
Seventeam 850w modular CS-NT-ZERO-2  
  hide details  
Reply
post #5756 of 20223
Quote:
Originally Posted by Sp33d Junki3 View Post

I did notice. You can mount the H220 on top and a different rad at front.

By the way you were the guy who let me know I could fit the h320 in the top of my case. I do NOT know if I will be able to mount it so the fill port is up. Can you determine if I can do that. That will make my setup much more efficient if I can do that. It will be shipping from ncix.ca in another12 days if all goes well. I really want to be on top of this installation, without any big surprises. Since my case has tons of intake fans (two double sets for the hard drive cage, and I only have SSD drives, not those heavy , hot oldies,a huge 230mm side case fan a 120 mm Noctua fan on the other side, all on intake, I plan on setting this unit for exhaust at the top.Will I have to move my fans to have the fill port up?? Thanks for all help you can provide.
Edited by os2wiz - 8/12/13 at 3:15pm
post #5757 of 20223
ok, so here we are four months later, and my H220 has finally decided to start making whirring/clicking noises... kinda like the sound a cricket makes. It's real loud and high-pitched during boot-up when the pump is at full speed, but then quiets down to just a subtle clicking noise once the speedfan profile loads after login. It then fluctuates in volume based on the demand being placed on the pump.

The pump was almost completely silent for the last four months, regardless of pump speed... and then this. frown.gif

Please tell me I don't have to take the whole darn thing apart to fix this... lol.
post #5758 of 20223
Quote:
Originally Posted by os2wiz View Post

By the way you were the guy who let me know I could fit the h320 in the top of my case. I do NOT know if I will be able to mount it so the fill port is up. Can you determine if I can do that. That will make my setup much more efficient if I can do that. It will be shipping from ncix.ca in another12 days if all goes well. I really want to be on top of this installation, without any big surprises. Since my case has tons of intake fans (two double sets for the hard drive cage, and I only have SSD drives, not those heavy , hot oldies,a huge 230mm side case fan a 120 mm Noctua fan on the other side, all on intake, I plan on setting this unit for exhaust at the top.Will I have to move my fans to have the fill port up?? Thanks for all help you can provide.

If you're still using the BlackHawk Ultra, you shouldn't have any problems fitting the H320 at the top of your case with the fill port facing up. It even looks like you should be able to do push/ pull in that configuration. If you're doing push/ pull though make sure to make all of your top motherboard connections first, so that you won't have to strain to get them plugged in after the kit is installed.
Sanjuro
(14 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 at 4.6 GHz Gigabyte 990FX-Gaming EVGA GTX 980Ti Classified 16 gigs of Corsair Vengeance at 1600MHz 
Hard DriveHard DriveOptical DriveCooling
120 gig OCZ ssd 2 Terabyte Western Digital drive Lite-On DVD burner Corsair H100i GTX Extreme 
OSMonitorPowerCase
Windows 7 64 BenQ 27 inch 1080p GL2760H EVGA 850 watt gold rated fully modular Super Nova Corsair 450 D 
MouseAudio
Thermaltake Black Element Logitech Z506 5.1 surround sound system. 
  hide details  
Reply
Sanjuro
(14 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 at 4.6 GHz Gigabyte 990FX-Gaming EVGA GTX 980Ti Classified 16 gigs of Corsair Vengeance at 1600MHz 
Hard DriveHard DriveOptical DriveCooling
120 gig OCZ ssd 2 Terabyte Western Digital drive Lite-On DVD burner Corsair H100i GTX Extreme 
OSMonitorPowerCase
Windows 7 64 BenQ 27 inch 1080p GL2760H EVGA 850 watt gold rated fully modular Super Nova Corsair 450 D 
MouseAudio
Thermaltake Black Element Logitech Z506 5.1 surround sound system. 
  hide details  
Reply
post #5759 of 20223
Quote:
Originally Posted by paleh0rse14 View Post

ok, so here we are four months later, and my H220 has finally decided to start making whirring/clicking noises... kinda like the sound a cricket makes. It's real loud and high-pitched during boot-up when the pump is at full speed, but then quiets down to just a subtle clicking noise once the speedfan profile loads after login. It then fluctuates in volume based on the demand being placed on the pump.

The pump was almost completely silent for the last four months, regardless of pump speed... and then this. frown.gif

Please tell me I don't have to take the whole darn thing apart to fix this... lol.

Please try following the guide in the OP for removing air from the kit. If that doesn't work you can also try running the pump with the fill-port cap removed. Just make sure that you have some paper towels handy if it drips when you first remove the cap and while running it. If that doesn't work then please PM me and we'll go from there.
Sanjuro
(14 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 at 4.6 GHz Gigabyte 990FX-Gaming EVGA GTX 980Ti Classified 16 gigs of Corsair Vengeance at 1600MHz 
Hard DriveHard DriveOptical DriveCooling
120 gig OCZ ssd 2 Terabyte Western Digital drive Lite-On DVD burner Corsair H100i GTX Extreme 
OSMonitorPowerCase
Windows 7 64 BenQ 27 inch 1080p GL2760H EVGA 850 watt gold rated fully modular Super Nova Corsair 450 D 
MouseAudio
Thermaltake Black Element Logitech Z506 5.1 surround sound system. 
  hide details  
Reply
Sanjuro
(14 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 at 4.6 GHz Gigabyte 990FX-Gaming EVGA GTX 980Ti Classified 16 gigs of Corsair Vengeance at 1600MHz 
Hard DriveHard DriveOptical DriveCooling
120 gig OCZ ssd 2 Terabyte Western Digital drive Lite-On DVD burner Corsair H100i GTX Extreme 
OSMonitorPowerCase
Windows 7 64 BenQ 27 inch 1080p GL2760H EVGA 850 watt gold rated fully modular Super Nova Corsair 450 D 
MouseAudio
Thermaltake Black Element Logitech Z506 5.1 surround sound system. 
  hide details  
Reply
post #5760 of 20223
Quote:
Originally Posted by BramSLI1 View Post

Please try following the guide in the OP for removing air from the kit. If that doesn't work you can also try running the pump with the fill-port cap removed. Just make sure that you have some paper towels handy if it drips when you first remove the cap and while running it. If that doesn't work then please PM me and we'll go from there.

Why is it doing that after 4 months of usage? Is it because of the liquid evaporated over time?
My system
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5820K 6core Asus X99-A Asus GTX 970 4x4 16g DDR4 
Hard DriveOptical DriveCoolingOS
2 x WD 500Gb Caviar Black Raid 0 LG DVD Burner Swiftech H240X Windows 10 64bit 
MonitorKeyboardPowerCase
Dell 30" U3014 Monitor Logitech G910 Enermax Galaxy DXX 850W NZXT Switch 810 
MouseMouse Pad
Logitech G502 Roccat Sense 
  hide details  
Reply
My system
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5820K 6core Asus X99-A Asus GTX 970 4x4 16g DDR4 
Hard DriveOptical DriveCoolingOS
2 x WD 500Gb Caviar Black Raid 0 LG DVD Burner Swiftech H240X Windows 10 64bit 
MonitorKeyboardPowerCase
Dell 30" U3014 Monitor Logitech G910 Enermax Galaxy DXX 850W NZXT Switch 810 
MouseMouse Pad
Logitech G502 Roccat Sense 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Swiftech H220/H320/H220X/H240X/H140X and CM Glacer 240L/360L Owners' Club