Overclock.net › Forums › Intel › Intel - General › New to overclocking, Question.
New Posts  All Forums:Forum Nav:

New to overclocking, Question. - Page 2

post #11 of 26
Thread Starter 
Bump!
post #12 of 26
Thread Starter 
Quote:
Originally Posted by Yoyo1555 View Post

Thanks you guys are being helpful.
I have another issue:
I sometimes get a short shut down followed by a power-up at p.o.s.t i get this message telling me "a surge was detected the *something something* to protect from unstable PSU*.
is that something to do the O.C?
(1000W seasonic).

Anybody?

Motherboard- Asus p8z77-v pro, seasonic 1000W P
post #13 of 26
Thread Starter 
A side from the above, can someone tell me why I keep getting a 'WHEA'?
post #14 of 26
Not sure about your restart issue, but the WHEA errors are normally from error correction being done by the CPU and indicate that the overclock is not completely stable. Usually a minimal bump in Vcore will stop them.
post #15 of 26
Thread Starter 
Quote:
Originally Posted by Forceman View Post

Not sure about your restart issue, but the WHEA errors are normally from error correction being done by the CPU and indicate that the overclock is not completely stable. Usually a minimal bump in Vcore will stop them.
I'm using an offset of +0.050 @4.4Ghz and vCore 1.276 to 1.288 under load is that fine?
post #16 of 26
Quote:
Originally Posted by Yoyo1555 View Post

I'm using an offset of +0.050 @4.4Ghz and vCore 1.276 to 1.288 under load is that fine?

That's a good voltage, but if you are getting WHEA errors you might want to bump the offset to +0.06 (or maybe even 0.055) and see if that eliminates them.
post #17 of 26
Thread Starter 
Thanks I'll try it.
post #18 of 26
Thread Starter 
Sorry for double posting...

I tried 0.055 and it wasn't enough, although I'm currently working with 0.06 and it seems to be it.
vCore up to 1.296 max.
post #19 of 26
Thread Starter 


^That's at idle, are those normal?
post #20 of 26
Thread Starter 









Is there somthing that needs to be changed (or might benefit from one)?



BTW read the PLL overvoltage needs to be disabled in-order to keep sleep mode, so how is it that I can put it to sleep?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › New to overclocking, Question.