Overclock.net › Forums › Cooling › Water Cooling › LD PC V10 WC Questions Before Build!!!!
New Posts  All Forums:Forum Nav:

LD PC V10 WC Questions Before Build!!!!

post #1 of 3
Thread Starter 
So after a long time i 've decided to put together an extreme wc case again.
I got a nice LD V10 huge case off ebay in a very nice price and here are my questions.

My system is

G1 Assasin 2 X79
i7 3820
4x2gb ocz 1600mhz c7 ram it runs @2133 c9 (pretty cool!)
Gtx 680

Blocks ek supreme, bitspower ram blocks, ek full cover for the gpu,

From my previous build i have a phobya g changer v1.2 480 and a 240, olso i have a ek xt 480, 2 d5 pumps, koolance 452x2 rev2, 24v koolance power supply for the pumps,13/10 tube and fittings and lots of fans.

Should i keep the rads i have or find another 480?

The loop should go 452x2 > 240 bottom rad > 480 rad bottom > gpu > ram 1 > cpu > ram 2 > 480 rad roof > 452x2

or get a cylinder res and go like this

res > pump 1 > 240 bottom rad > 480 rad bottom > pump 2 > gpu > ram 1 > cpu > ram 2 > 480 rad roof > res .

Please help!!!!
post #2 of 3
looks like you have enough rads. i like my res seperate from the pump if the room is there. hope this helps
post #3 of 3
Thread Starter 
Well about the rads i know i am ok but i dont want the case to look empty, its HUGE. The main problem is the pumps and the loop layout...

Thanks vaporizer thumb.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › LD PC V10 WC Questions Before Build!!!!