Overclock.net › Forums › Cooling › Air Cooling › Safe? Thermalright TY-143 + RAM Issues? :(
New Posts  All Forums:Forum Nav:

Safe? Thermalright TY-143 + RAM Issues? :( - Page 2

post #11 of 14
mikeoO1 don't worry anought the power. Each fan has it's own wire from molex.

As for fan over RAM, isn't the XMS 25mm tall? Add 140mm for fan and that's 165mm so I would think it will fit... unless you have a narrow case and can't put sidecover on. frown.gif
Edited by doyll - 3/12/13 at 9:18am
post #12 of 14
Thread Starter 
Ah right, thanks! I assumed it was shared and then split to different headers than each having their own wire.

And yeah it's about that height, but the TY-143 seems to be deep enough that it covers half the RAM height. I've got the position so the 150mm width is aimed at the top of the case. My physical case is 180mm wide.

Right now I have found a way, but I don't know. Because of the rubber mounts it pushes the fan out slightly to allow some room for air I have pushed the bottom of the fan so it's sitting between the DIMM slot and the heatsink, the DIMM slot is only ever so slightly titled due to this. So the fan itself is at a slight angle.

If that makes sense?
post #13 of 14
Sounds like it's working smile.gif
post #14 of 14
Thread Starter 
Thanks! smile.gif It seems OK for now and I can get the window on!

P.S I also cannot count, 0.60A EACH, x4 = ... 2.4A redface.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › Safe? Thermalright TY-143 + RAM Issues? :(