post #1 of 1
Thread Starter 
Hey everyone, I need a bit of help here. I bought this board off of Ebay, and successfully testbooted it on the bench using a 1.8Ghz Core2Duo and 4Gb of DDR3. However, I think I screwed something up. The memory I used in 1333Mhz memory, yet I THINK the board only supports 800/1066? When I test booted, it showed the memory at 1066Mhz, meaning, in Auto mode, it had stepped down the memory clock. I MANUALLY changed the speed to 1333, and the board hasn't booted since. frown.gif

I tried using the BIOS jumper to reset, no effect, I tried REMOVING the jumper to kick the BIOS recovery off....nothing. I tried swapping out some 1066Mhz DDR3...nothing.....if I remove the RAM and power on, I DO get the correct normal 3 beep code, so it knows the memory is missing. I've done everything I know as a tech to get the board to reset with no luck. Anyone have any ideas? It's just a $50 Socket 775 board I was planning to use for Multi-track audio recording, but I am wondering if my futzing around in the BIOS has bricked the board! frown.gif

PLEASE HELP???
Godzilla
(13 items)
 
  
CPUMotherboardGraphicsRAM
Xeon 3.2Ghz DP5060 x 2 HP xw8400 Workstation BFG GTX285OC x1 4Gb DDR2 667 (Fully Buffered) 
Hard DriveOptical DriveOSMonitor
3-(1-250Gb/1-500Gb/1-1Tb) 2-16x DL DVD-RW's (SATA) XP Pro/Vista Ultimate Dual Boot Olevia 32" LCD (1360x768) 
PowerCase
Antec 850SLI Server Tower 
  hide details  
Reply
Godzilla
(13 items)
 
  
CPUMotherboardGraphicsRAM
Xeon 3.2Ghz DP5060 x 2 HP xw8400 Workstation BFG GTX285OC x1 4Gb DDR2 667 (Fully Buffered) 
Hard DriveOptical DriveOSMonitor
3-(1-250Gb/1-500Gb/1-1Tb) 2-16x DL DVD-RW's (SATA) XP Pro/Vista Ultimate Dual Boot Olevia 32" LCD (1360x768) 
PowerCase
Antec 850SLI Server Tower 
  hide details  
Reply