Overclock.net › Forums › AMD › AMD Motherboards › GA-970A-DS3 rev 1.1 and DDR3 TX2000KLU-6GK how to setup bios?
New Posts  All Forums:Forum Nav:

GA-970A-DS3 rev 1.1 and DDR3 TX2000KLU-6GK how to setup bios?

post #1 of 3
Thread Starter 
Hi
Yesterday i bought
motherboard GA-970A-DS3
DDR3 : TX2000KLU-6GK
Processor AMD FX 4130 3.8Ghz 8mb Cache

I dont know how to setup the values in bios to get the DDR working at 2000 Mhz, on boot up it shows only 1333.
I tried changing the values in MIT, and on boot shows that starts let say 1866, but Windows wont start, it reboots automatically, or shows files are corrupted. Please there are lots of settings for the ram memory but i don't know what to do.

Thanks in advance


link for the motherboard : http://www.gigabyte.com/products/product-page.aspx?pid=4122#ov
link for Transcend DDR : http://www.transcendusa.com/Support/DLCenter/Datasheet/TX2000KLU-6GK_2950.pdf
post #2 of 3
You won't get DDR3-2000 operation with a bus clock OC. You will get DDR3-1866 operation, but you must configure the right timings - timings that will work at stable settings. You could start with 1866Mhz, 9-9-9-24, 1.6V, ensuring that secondary timings are set properly, and possibly work your timings down to 8-9-8 or 8-8-8 if you're lucky.
post #3 of 3
Thread Starter 
Thank you very very much man thumb.gif , my PC boots now biggrin.gifbiggrin.gifbiggrin.gif i will test it to see if everything goes ok.
You saved me sleepless Google nights biggrin.gif

btw it runs 8 9 8 24 at 1.6V 1866Mhz
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › GA-970A-DS3 rev 1.1 and DDR3 TX2000KLU-6GK how to setup bios?