Overclock.net › Forums › Graphics Cards › NVIDIA › The power of Titan!!!
New Posts  All Forums:Forum Nav:

The power of Titan!!! - Page 3

post #21 of 35
lol sure did ^


Please tell us what was the vGPU when you blew the card?
post #22 of 35
I think he mentioned 1.45v it was done
post #23 of 35
Quote:
Originally Posted by cowie View Post

I think he mentioned 1.45v it was done
We've had reports of the cards pushing out 1.49V so I doubt that.
Think it will be higher as that was without hardware modifications, a bit higher.
post #24 of 35
apart from looking like a home made bomb - I found it , very interesting, keep it up thumb.gif
post #25 of 35
Quote:
Originally Posted by ladcrooks View Post

apart from looking like a home made bomb - I found it , very interesting, keep it up thumb.gif
Most volt hardmods do especially if they require a lot of things to be interconnected on the pcb itself biggrin.gif
post #26 of 35
Quote:
Originally Posted by Alatar View Post

Very cool and awesome modding! thumb.gif

However it seems like you guys lost the silicon lottery when it comes to that particular chip. Only 1175MHz on air is pretty low, lots of chips here have passed 1200MHz and I've seen at least one hit 1300 on air without more than a modded bios (1.212v and upped power limit). Sucks that the card is so expensive there :/

Very nice, who has the 1300mhz on air card?
post #27 of 35
Quote:
Originally Posted by maarten12100 View Post

We've had reports of the cards pushing out 1.49V so I doubt that.
Think it will be higher as that was without hardware modifications, a bit higher.

No i think 1.49 would take the stock board out,after zombie mod not sure what was used to get those clocks
post #28 of 35
Thread Starter 
I do not recommend more than 1.38V...maybe 1.4V with stock PWM (regardless to be sub zero).
The card death at 1.46V, sub zero, in 10 seconds..
REALLY crap PWM.

wink.gif
post #29 of 35
So stock it can run up to 1.200v in software, ~1.225v real DMM, card death at ~1.46v...........not a lot of headroom.
post #30 of 35
Quote:
Originally Posted by cowie View Post

No i think 1.49 would take the stock board out,after zombie mod not sure what was used to get those clocks
Ow gawd I'm so got dam tired of learning for exams you we're right I thought you said 1.245V instead of 1.45V fail redface.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › The power of Titan!!!