Originally Posted by gill22
EPS Pin comes in the way a little bit with that top rad push pull config. Havent tried it either...but the front 200 MM should work out..thinking of getting custom side cover with 200mm hole near the power supply and graphics card..to get the air moving. Mine idle temps are at 24 - 27 with ambient temp 21 and 48 at load..with stock clock for 3770K.. will be overclocking it soon. and GPU temp is 23 at idle.
If you are using any z77 Asus mobo, yes the Cpu power connector will get in the way. For my sabertooth z77, I had to shave the CPU connector in order to fit the rad to the original screw mount of the case. Any thing thicker than the swiftech rad will not fit.
For the 120 rad, do note that it is not a direct fit. You have to drill the chassis fan screw holes to make a slight offset. If you mount a 120 rad without modding, you won't be able to fit a fan on the 120 rad. The top 240 will get in the way. Notice my 240 is already touching the 120mm rad fan?
The Pull 200 mm fan adds significant airflow to my case IMO. You should try it. I'm sure it helps lowering temp a bit too with push pull on the 200 mm rad.