Originally Posted by timerwin63
Sub'd. Out of curiosity, how did you paint the fan controller? I'm thinking about doing mine for my new Prodigy build.
pretty much just stripped it right down and separated all the electronical guts of the controller from the frame
and painted the frame and knobs. for the NZXT I used green tape to cover up the clear numbered areas where the light
would shine through.
for painting I first always prime with Rust-o-leum 2x grey primer (note the can must state "can use on
plastic" . i'm sure other kinds work but this is what I use/used. then I airbrushed the rest of it and put 2
layers of clear coat on after. this is pretty much the process of how I paint most the things I painted.
the frame seperates from the electronical parts with ease I found. basically 4 to 8 screws max depending
thanx and good luck