Overclock.net › Forums › Cooling › Water Cooling › CPU to Motherboard Water Block Links?
New Posts  All Forums:Forum Nav:

CPU to Motherboard Water Block Links?

post #1 of 11
Thread Starter 
I'm trying to figure out the best way to hose up my next build and I'm having difficulty figuring out how to connect up the cpu water block with the motherboard water blocks. I am using 7/16 5/8 primoflex tubing with compression fittings. I would like to use white tubing with bitspower compression fittings, but its too tight in the cpu/motherboard/ram area to connect it using fittings and tubing. Thus, I'm looking at SLI fittings to link up the cpu and motherboard water blocks.

For example, the guy from singularity computers uses black sparkle fittings with bitspower crystal link sli connectors to hose up the water blocks. It's very clean without the extra loopy tubing and compression fittings.




Here's my problem with doing it that way. If I use distilled water and white tubing, when I get to the cpu area, it'll be clear. and that isn't what I want. Are there any WHITE sli links that is able to fit inside the bitspower fittings like that? My other option is to use the mayhem pastel ice white and use clear tubing but I'd rather not have to move to a premixed coolant if I'm able to avoid it.

Any thoughts on how to hose up the cpu area with a white tubing theme?
Hydra TH10A
(15 items)
 
Nova Vault
(5 items)
 
 
CPUMotherboardGraphicsRAM
5960x Rampage V Extreme 3-Way SLI GTX 980 Ti Hydro Copper 16 GB Dominator Platinum 
Hard DriveCoolingCoolingCooling
480GB Intel 730 SSD Raid 0 x4 Custom Loop 4x 480 Alphacool Radiators Aquacomputer Aqualis 
MonitorKeyboardPowerCase
Acer B326HK Razer Black Widow 2014 Corsair AX1500i  Case Labs TH10A 
MouseMouse PadAudio
Razer Naga 2014 Megasoma 2 Creative ZxR 
CPUMotherboardRAMHard Drive
Xeon D-1541 Supermicro X10SDV-TLN4F 128GB Crucial DDR4 2133 ECC 10x WD Red 4TB  
Case
Caselabs Nova  
CPUGraphicsRAMHard Drive
2.9 Ghz Radeon Pro 560 4GB 16 GB 1TB SSD 
OSMonitor
OS 10.11 15 Inch Retina 2880x1800 
  hide details  
Reply
Hydra TH10A
(15 items)
 
Nova Vault
(5 items)
 
 
CPUMotherboardGraphicsRAM
5960x Rampage V Extreme 3-Way SLI GTX 980 Ti Hydro Copper 16 GB Dominator Platinum 
Hard DriveCoolingCoolingCooling
480GB Intel 730 SSD Raid 0 x4 Custom Loop 4x 480 Alphacool Radiators Aquacomputer Aqualis 
MonitorKeyboardPowerCase
Acer B326HK Razer Black Widow 2014 Corsair AX1500i  Case Labs TH10A 
MouseMouse PadAudio
Razer Naga 2014 Megasoma 2 Creative ZxR 
CPUMotherboardRAMHard Drive
Xeon D-1541 Supermicro X10SDV-TLN4F 128GB Crucial DDR4 2133 ECC 10x WD Red 4TB  
Case
Caselabs Nova  
CPUGraphicsRAMHard Drive
2.9 Ghz Radeon Pro 560 4GB 16 GB 1TB SSD 
OSMonitor
OS 10.11 15 Inch Retina 2880x1800 
  hide details  
Reply
post #2 of 11
I did mine like this. I used smaller tubing for this area and smaller fittings.

I used 1/2" ID 3/4" OD for the rest of the loop and CPU mobo blocks Area has 3/8" ID and 1/2 " OD. So it was much easier to manage. And there is not much difference between 1/2" ID (4/8") and 3/8" ID




****In this pic I had to use Enzo bulky fitting because the bitspower were not available, thats why there is a waves in the hose, but with the Bitspower fittings that I posted below, your hoses will be straight.




You can find many 3/8"ID - 1/2"OD tubing at www.performance-pcs.com

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_413_292_1153&products_id=36318




You can also use those fittings

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_346_393_611_626&products_id=27467




Edited by KaRLiToS - 3/18/13 at 6:29am
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #3 of 11
Use whiteout and paint the links?
MEGATRON
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 4710MQ P170-SM-A Nvidia GTX 980M @ 1470mhz 32GB DDR3L 1600mhz 
Hard DriveHard DriveHard DriveOptical Drive
Samsung SSD 840 EVO Msata 250GB SanDisk SDSSDX120GG25 HGST 1TB Blu-Ray 
CoolingOSMonitorKeyboard
OverCharged Cage fans Windows 8.1 + Virtual Machines Modified 1080P glossy IPS 60hz Stock 
Power
240 Watt Brick 
  hide details  
Reply
MEGATRON
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 4710MQ P170-SM-A Nvidia GTX 980M @ 1470mhz 32GB DDR3L 1600mhz 
Hard DriveHard DriveHard DriveOptical Drive
Samsung SSD 840 EVO Msata 250GB SanDisk SDSSDX120GG25 HGST 1TB Blu-Ray 
CoolingOSMonitorKeyboard
OverCharged Cage fans Windows 8.1 + Virtual Machines Modified 1080P glossy IPS 60hz Stock 
Power
240 Watt Brick 
  hide details  
Reply
post #4 of 11
Try to find 12mm outside diameter white plastic tubing to replace the clear acrylic crystal links?

Or just paint the originals white
Edited by Jakusonfire - 3/18/13 at 7:27am
Kusanagi
(21 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC Corsair Vengeance Pro CMY16GX3M2A2133C11 16GB 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 256GB X2 EK Supremacy Aqua Computer Aquaero 6 Pro Aqua Computer D5 USB 
CoolingCoolingCoolingCooling
Aquacomputer MPS 400 flow meter EK-CoolStream PE 360 EK-Coolstream PE 240 Noiseblocker Eloop B12-PS 
CoolingCoolingCoolingCooling
EK Vardar F2 EK-FC Titan Acetal & Nickel EK-RAM Monarch X4 Clean CSQ - Acetal+Nickel EK-D5 X-RES 140 CSQ 
OSMonitorMonitorPower
Win 8.1 Pro 64 bit Samsung S27A750d LG E2290V-SN Silverstone Strider Plus 850W ST85F-P 
Case
Corsair Obsidian 750D 
  hide details  
Reply
Kusanagi
(21 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC Corsair Vengeance Pro CMY16GX3M2A2133C11 16GB 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 256GB X2 EK Supremacy Aqua Computer Aquaero 6 Pro Aqua Computer D5 USB 
CoolingCoolingCoolingCooling
Aquacomputer MPS 400 flow meter EK-CoolStream PE 360 EK-Coolstream PE 240 Noiseblocker Eloop B12-PS 
CoolingCoolingCoolingCooling
EK Vardar F2 EK-FC Titan Acetal & Nickel EK-RAM Monarch X4 Clean CSQ - Acetal+Nickel EK-D5 X-RES 140 CSQ 
OSMonitorMonitorPower
Win 8.1 Pro 64 bit Samsung S27A750d LG E2290V-SN Silverstone Strider Plus 850W ST85F-P 
Case
Corsair Obsidian 750D 
  hide details  
Reply
post #5 of 11
Thread Starter 
Thanks for all the replies. I was toying with the idea of using 1/2 inch 90 degree barbs on just sticking 7/16 ID white pirmochill tubing on it WITHOUT clamps. Sure people say there's risk when it comes to using barbs without clamps but for such sort distances ~ 1 inch or so, it might be acceptable? The piping is definitely not going to be moving but it will expand from soaking up water. Will a 7/16 tube on a 1/2 fitting expand so much that it will leak even if its 100% on the fitting?

For example: http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=29051 or http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=27866
(Ideally, a 90 dgree rotary long fitting)

The other option that I'm open to, like Karlitos, use some 3/8 ID 1/2 OD compression fittings in just that area, down from 7/16 ID and 5/8 OD.

On that note, would it be possible to fit 7/16 ID 5/8 OD compression fittings http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=27479 inside that little area if I were to use 90 degree ones on the motherboard and cpu blocks?
Hydra TH10A
(15 items)
 
Nova Vault
(5 items)
 
 
CPUMotherboardGraphicsRAM
5960x Rampage V Extreme 3-Way SLI GTX 980 Ti Hydro Copper 16 GB Dominator Platinum 
Hard DriveCoolingCoolingCooling
480GB Intel 730 SSD Raid 0 x4 Custom Loop 4x 480 Alphacool Radiators Aquacomputer Aqualis 
MonitorKeyboardPowerCase
Acer B326HK Razer Black Widow 2014 Corsair AX1500i  Case Labs TH10A 
MouseMouse PadAudio
Razer Naga 2014 Megasoma 2 Creative ZxR 
CPUMotherboardRAMHard Drive
Xeon D-1541 Supermicro X10SDV-TLN4F 128GB Crucial DDR4 2133 ECC 10x WD Red 4TB  
Case
Caselabs Nova  
CPUGraphicsRAMHard Drive
2.9 Ghz Radeon Pro 560 4GB 16 GB 1TB SSD 
OSMonitor
OS 10.11 15 Inch Retina 2880x1800 
  hide details  
Reply
Hydra TH10A
(15 items)
 
Nova Vault
(5 items)
 
 
CPUMotherboardGraphicsRAM
5960x Rampage V Extreme 3-Way SLI GTX 980 Ti Hydro Copper 16 GB Dominator Platinum 
Hard DriveCoolingCoolingCooling
480GB Intel 730 SSD Raid 0 x4 Custom Loop 4x 480 Alphacool Radiators Aquacomputer Aqualis 
MonitorKeyboardPowerCase
Acer B326HK Razer Black Widow 2014 Corsair AX1500i  Case Labs TH10A 
MouseMouse PadAudio
Razer Naga 2014 Megasoma 2 Creative ZxR 
CPUMotherboardRAMHard Drive
Xeon D-1541 Supermicro X10SDV-TLN4F 128GB Crucial DDR4 2133 ECC 10x WD Red 4TB  
Case
Caselabs Nova  
CPUGraphicsRAMHard Drive
2.9 Ghz Radeon Pro 560 4GB 16 GB 1TB SSD 
OSMonitor
OS 10.11 15 Inch Retina 2880x1800 
  hide details  
Reply
post #6 of 11
Thread Starter 
I just reread Karlitos' post and saw that he was using 1/2" ID 3/4" OD throughout his system. Considering he dropped down to 3/8 ID 1/2 OD, I might be able to get away with just using my 7/16 ID 5/8 OD 90 degree compression fittings like I have throughout my system. Since I'm using this waterblock on a LGA 2011, I might be able to fit it all in there. If not, I'll drop down to the 3/8 ID and 1/2 OD compression fittings.





On a different note, with all these 90 degree turns and fittings, my D5 pump is completely maxed out at "5" but pushes water as if its only at "3" or "4" I'm sure dropping the compression fitting ID isn't going help that either :/
Hydra TH10A
(15 items)
 
Nova Vault
(5 items)
 
 
CPUMotherboardGraphicsRAM
5960x Rampage V Extreme 3-Way SLI GTX 980 Ti Hydro Copper 16 GB Dominator Platinum 
Hard DriveCoolingCoolingCooling
480GB Intel 730 SSD Raid 0 x4 Custom Loop 4x 480 Alphacool Radiators Aquacomputer Aqualis 
MonitorKeyboardPowerCase
Acer B326HK Razer Black Widow 2014 Corsair AX1500i  Case Labs TH10A 
MouseMouse PadAudio
Razer Naga 2014 Megasoma 2 Creative ZxR 
CPUMotherboardRAMHard Drive
Xeon D-1541 Supermicro X10SDV-TLN4F 128GB Crucial DDR4 2133 ECC 10x WD Red 4TB  
Case
Caselabs Nova  
CPUGraphicsRAMHard Drive
2.9 Ghz Radeon Pro 560 4GB 16 GB 1TB SSD 
OSMonitor
OS 10.11 15 Inch Retina 2880x1800 
  hide details  
Reply
Hydra TH10A
(15 items)
 
Nova Vault
(5 items)
 
 
CPUMotherboardGraphicsRAM
5960x Rampage V Extreme 3-Way SLI GTX 980 Ti Hydro Copper 16 GB Dominator Platinum 
Hard DriveCoolingCoolingCooling
480GB Intel 730 SSD Raid 0 x4 Custom Loop 4x 480 Alphacool Radiators Aquacomputer Aqualis 
MonitorKeyboardPowerCase
Acer B326HK Razer Black Widow 2014 Corsair AX1500i  Case Labs TH10A 
MouseMouse PadAudio
Razer Naga 2014 Megasoma 2 Creative ZxR 
CPUMotherboardRAMHard Drive
Xeon D-1541 Supermicro X10SDV-TLN4F 128GB Crucial DDR4 2133 ECC 10x WD Red 4TB  
Case
Caselabs Nova  
CPUGraphicsRAMHard Drive
2.9 Ghz Radeon Pro 560 4GB 16 GB 1TB SSD 
OSMonitor
OS 10.11 15 Inch Retina 2880x1800 
  hide details  
Reply
post #7 of 11
How much stuff do you have in your loop?
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #8 of 11
Thread Starter 


This is what I got as of right now. RX360, EX240, EX140 with a GTX 690 in the loop powered by a 655 vario. I'm planning on moving up to LGA2011 (be it SB-E or IVB-E I haven't decided) I'm just trying to plan everything out right now. I'll be using most of the same water cooling equipment I've got right now. The flow indicators don't spin nearly as fast as it did before I put in the EX240 in the bottom. Bumping the pump up to "5" is the only pushing out the equivalent of a "3" or "4". It might be because the tubes are hosed through the back behind the motherboard or it might be because of all the 90 degree fittings I've got in the loop.

How much can the D5 drive assuming its not a tubing kink or pinch?
Edited by Syan48306 - 3/18/13 at 10:52am
Hydra TH10A
(15 items)
 
Nova Vault
(5 items)
 
 
CPUMotherboardGraphicsRAM
5960x Rampage V Extreme 3-Way SLI GTX 980 Ti Hydro Copper 16 GB Dominator Platinum 
Hard DriveCoolingCoolingCooling
480GB Intel 730 SSD Raid 0 x4 Custom Loop 4x 480 Alphacool Radiators Aquacomputer Aqualis 
MonitorKeyboardPowerCase
Acer B326HK Razer Black Widow 2014 Corsair AX1500i  Case Labs TH10A 
MouseMouse PadAudio
Razer Naga 2014 Megasoma 2 Creative ZxR 
CPUMotherboardRAMHard Drive
Xeon D-1541 Supermicro X10SDV-TLN4F 128GB Crucial DDR4 2133 ECC 10x WD Red 4TB  
Case
Caselabs Nova  
CPUGraphicsRAMHard Drive
2.9 Ghz Radeon Pro 560 4GB 16 GB 1TB SSD 
OSMonitor
OS 10.11 15 Inch Retina 2880x1800 
  hide details  
Reply
Hydra TH10A
(15 items)
 
Nova Vault
(5 items)
 
 
CPUMotherboardGraphicsRAM
5960x Rampage V Extreme 3-Way SLI GTX 980 Ti Hydro Copper 16 GB Dominator Platinum 
Hard DriveCoolingCoolingCooling
480GB Intel 730 SSD Raid 0 x4 Custom Loop 4x 480 Alphacool Radiators Aquacomputer Aqualis 
MonitorKeyboardPowerCase
Acer B326HK Razer Black Widow 2014 Corsair AX1500i  Case Labs TH10A 
MouseMouse PadAudio
Razer Naga 2014 Megasoma 2 Creative ZxR 
CPUMotherboardRAMHard Drive
Xeon D-1541 Supermicro X10SDV-TLN4F 128GB Crucial DDR4 2133 ECC 10x WD Red 4TB  
Case
Caselabs Nova  
CPUGraphicsRAMHard Drive
2.9 Ghz Radeon Pro 560 4GB 16 GB 1TB SSD 
OSMonitor
OS 10.11 15 Inch Retina 2880x1800 
  hide details  
Reply
post #9 of 11
Quote:
Originally Posted by Syan48306 View Post



This is what I got as of right now. RX360, EX240, EX140 with a GTX 690 in the loop powered by a 655 vario. I'm planning on moving up to LGA2011 (be it SB-E or IVB-E I haven't decided) I'm just trying to plan everything out right now. I'll be using most of the same water cooling equipment I've got right now. The flow indicators don't spin nearly as fast as it did before I put in the EX240 in the bottom. Bumping the pump up to "5" is the only pushing out the equivalent of a "3" or "4". It might be because the tubes are hosed through the back behind the motherboard or it might be because of all the 90 degree fittings I've got in the loop.

How much can the D5 drive assuming its not a cable kink or pinch?

You don't have a lot of stuff, a D5 is suppose to run this very well.

Wheter you have gunk in your CPU, which I HIGHLY doubt, I'm pretty sure your flow meter brings a lot of restriction to the loop. Or maybe kink(s)


I have this in my rig, and both of my pumps are set at "4"

  1. Reservoir
  2. EK D5 Dual Serial Top (Dual Pumps)
  3. Feser X-Changer 240mm Radiator
  4. 4 x EK FC-7970 Blocks (with EK Quad Parallel Bridge)
  5. Feser X-Changer 480mm Radiator
  6. Bitspower Temperature Sensor
  7. Feser X-Changer 360mm Radiator
  8. MOSFET Block (Koolance)
  9. CPU Block (EK HF Supreme)
  10. PCH Block (Koolance)
  11. BACK to Reservoir


Picture! (Click to show)

Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #10 of 11
Thread Starter 
Sure but you're running dual D5's in series. You're effectively doing 2 more GPU's and a 360 rad more than me. Clearly I'm running out of pump pressure. Or at the very least, I'm maxing it out. That looks like an 800D right? How are you able to fit dual D5's in the case? Do you have it behind the 5.25 bays?
Hydra TH10A
(15 items)
 
Nova Vault
(5 items)
 
 
CPUMotherboardGraphicsRAM
5960x Rampage V Extreme 3-Way SLI GTX 980 Ti Hydro Copper 16 GB Dominator Platinum 
Hard DriveCoolingCoolingCooling
480GB Intel 730 SSD Raid 0 x4 Custom Loop 4x 480 Alphacool Radiators Aquacomputer Aqualis 
MonitorKeyboardPowerCase
Acer B326HK Razer Black Widow 2014 Corsair AX1500i  Case Labs TH10A 
MouseMouse PadAudio
Razer Naga 2014 Megasoma 2 Creative ZxR 
CPUMotherboardRAMHard Drive
Xeon D-1541 Supermicro X10SDV-TLN4F 128GB Crucial DDR4 2133 ECC 10x WD Red 4TB  
Case
Caselabs Nova  
CPUGraphicsRAMHard Drive
2.9 Ghz Radeon Pro 560 4GB 16 GB 1TB SSD 
OSMonitor
OS 10.11 15 Inch Retina 2880x1800 
  hide details  
Reply
Hydra TH10A
(15 items)
 
Nova Vault
(5 items)
 
 
CPUMotherboardGraphicsRAM
5960x Rampage V Extreme 3-Way SLI GTX 980 Ti Hydro Copper 16 GB Dominator Platinum 
Hard DriveCoolingCoolingCooling
480GB Intel 730 SSD Raid 0 x4 Custom Loop 4x 480 Alphacool Radiators Aquacomputer Aqualis 
MonitorKeyboardPowerCase
Acer B326HK Razer Black Widow 2014 Corsair AX1500i  Case Labs TH10A 
MouseMouse PadAudio
Razer Naga 2014 Megasoma 2 Creative ZxR 
CPUMotherboardRAMHard Drive
Xeon D-1541 Supermicro X10SDV-TLN4F 128GB Crucial DDR4 2133 ECC 10x WD Red 4TB  
Case
Caselabs Nova  
CPUGraphicsRAMHard Drive
2.9 Ghz Radeon Pro 560 4GB 16 GB 1TB SSD 
OSMonitor
OS 10.11 15 Inch Retina 2880x1800 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › CPU to Motherboard Water Block Links?