Overclock.net › Forums › Cooling › Peltiers / TEC › TEC Liquid Chiller suggestions.
New Posts  All Forums:Forum Nav:

TEC Liquid Chiller suggestions. - Page 4

post #31 of 33
4/2/13 at 10:54am
Quote:
Originally Posted by technogiant View Post

Thanks for all your input Puck.....that has helped me decide....I was just sounding out the idea but think that the heat load will be too much for the chamber to take without sacrificing the chambers cooling temperatures for my gpu's.....Think I'll just follow my plans to adapt my chill box to submerse my components in liquified refrigerant gas....on balance (if that is at all balanced ;-/ ) think that should give me pretty darn good temps any way... but thanks again for the help smile.gif

No problem.

While the CPU will be happy, all that extra heat output being released into the box will make it at the expense of all the other components.
Behemoth
(21 items)
  		  
CPUMotherboardGraphicsRAM
Intel i7 3770K "Relidded" Asus Sabertooth Z77 Sapphire 7970 3GB 2X4GB Patriot Viper Extreme 
Hard DriveCoolingCoolingCooling
1TB Velociraptor 10k RPM w/ 64MB Cache Arqtik SDD TEC Waterblock @ 14v Bit-chill Dewpoint monitoring TEC Controller Dual 655 Pumps in series 
CoolingCoolingCoolingCooling
Dual Black Ice GTX 480 Gen2 Rads Danger Den dual drive bay with water temperatur... 21x Globe 120mm 80cfm server fans Modded H70 on GPU w/Zalman RAMsinks, Phobya Res... 
OSMonitorKeyboardPower
Win 7 Pro 64bit 27" 2560x1440 S-IPS Logitech G710+ Mechanical OCZ Z850W Main, OCZ Powerstream 520ADJ Slave 
CaseMouseMouse PadAudio
Custom Mountain Mods Extended Ascension Logitech G9x w/Wide Load grip Homemade 16ga 304 Stainless pad, Neoprene backed 32" soundbar w/ wireless subwoofer 
View all
  hide details  
Reply
Behemoth
(21 items)
  		  
CPUMotherboardGraphicsRAM
Intel i7 3770K "Relidded" Asus Sabertooth Z77 Sapphire 7970 3GB 2X4GB Patriot Viper Extreme 
Hard DriveCoolingCoolingCooling
1TB Velociraptor 10k RPM w/ 64MB Cache Arqtik SDD TEC Waterblock @ 14v Bit-chill Dewpoint monitoring TEC Controller Dual 655 Pumps in series 
CoolingCoolingCoolingCooling
Dual Black Ice GTX 480 Gen2 Rads Danger Den dual drive bay with water temperatur... 21x Globe 120mm 80cfm server fans Modded H70 on GPU w/Zalman RAMsinks, Phobya Res... 
OSMonitorKeyboardPower
Win 7 Pro 64bit 27" 2560x1440 S-IPS Logitech G710+ Mechanical OCZ Z850W Main, OCZ Powerstream 520ADJ Slave 
CaseMouseMouse PadAudio
Custom Mountain Mods Extended Ascension Logitech G9x w/Wide Load grip Homemade 16ga 304 Stainless pad, Neoprene backed 32" soundbar w/ wireless subwoofer 
View all
  hide details  
Reply
post #32 of 33
4/2/13 at 9:04pm
Thread Starter 
Quote:
Originally Posted by technogiant View Post

Thanks for all your input Puck.....that has helped me decide....I was just sounding out the idea but think that the heat load will be too much for the chamber to take without sacrificing the chambers cooling temperatures for my gpu's.....Think I'll just follow my plans to adapt my chill box to submerse my components in liquified refrigerant gas....on balance (if that is at all balanced ;-/ ) think that should give me pretty darn good temps any way... but thanks again for the help smile.gif

You could always get an APU (auxilery power unit) and run the peltiers at around 22volts

It would be less efficiency but it would allow you to use less of them at higher voltages, but it would increase the Qmax (the amount of heat they transfer) and allow you to use fewer."
Scythe (The Russian Winter)
(11 items)
  		  
CPUMotherboardGraphicsRAM
AMD FX-8350 Vishera 8-Core 4.0GHz RoG Crosshair V Formula GTX 460 1GB GDDR5 RAM Generic 1333MHz R.A.M. 
Hard DriveOptical DriveCoolingOS
Wester Digital 5400RPM HP CH20L "The Russian Winter" Windows 8 
KeyboardPowerCase
Steel Series Merc Fatal1ty 1000Watt PSU DIY Rig 
View all
  hide details  
Reply
Scythe (The Russian Winter)
(11 items)
  		  
CPUMotherboardGraphicsRAM
AMD FX-8350 Vishera 8-Core 4.0GHz RoG Crosshair V Formula GTX 460 1GB GDDR5 RAM Generic 1333MHz R.A.M. 
Hard DriveOptical DriveCoolingOS
Wester Digital 5400RPM HP CH20L "The Russian Winter" Windows 8 
KeyboardPowerCase
Steel Series Merc Fatal1ty 1000Watt PSU DIY Rig 
View all
  hide details  
Reply
post #33 of 33
4/3/13 at 12:40pm
Quote:
Originally Posted by ZytheEKS View Post

You could always get an APU (auxilery power unit) and run the peltiers at around 22volts

It would be less efficiency but it would allow you to use less of them at higher voltages, but it would increase the Qmax (the amount of heat they transfer) and allow you to use fewer."

He will then release even more heat into his cold box, raising the ambient of the whole thing.
Behemoth
(21 items)
  		  
CPUMotherboardGraphicsRAM
Intel i7 3770K "Relidded" Asus Sabertooth Z77 Sapphire 7970 3GB 2X4GB Patriot Viper Extreme 
Hard DriveCoolingCoolingCooling
1TB Velociraptor 10k RPM w/ 64MB Cache Arqtik SDD TEC Waterblock @ 14v Bit-chill Dewpoint monitoring TEC Controller Dual 655 Pumps in series 
CoolingCoolingCoolingCooling
Dual Black Ice GTX 480 Gen2 Rads Danger Den dual drive bay with water temperatur... 21x Globe 120mm 80cfm server fans Modded H70 on GPU w/Zalman RAMsinks, Phobya Res... 
OSMonitorKeyboardPower
Win 7 Pro 64bit 27" 2560x1440 S-IPS Logitech G710+ Mechanical OCZ Z850W Main, OCZ Powerstream 520ADJ Slave 
CaseMouseMouse PadAudio
Custom Mountain Mods Extended Ascension Logitech G9x w/Wide Load grip Homemade 16ga 304 Stainless pad, Neoprene backed 32" soundbar w/ wireless subwoofer 
View all
  hide details  
Reply
Behemoth
(21 items)
  		  
CPUMotherboardGraphicsRAM
Intel i7 3770K "Relidded" Asus Sabertooth Z77 Sapphire 7970 3GB 2X4GB Patriot Viper Extreme 
Hard DriveCoolingCoolingCooling
1TB Velociraptor 10k RPM w/ 64MB Cache Arqtik SDD TEC Waterblock @ 14v Bit-chill Dewpoint monitoring TEC Controller Dual 655 Pumps in series 
CoolingCoolingCoolingCooling
Dual Black Ice GTX 480 Gen2 Rads Danger Den dual drive bay with water temperatur... 21x Globe 120mm 80cfm server fans Modded H70 on GPU w/Zalman RAMsinks, Phobya Res... 
OSMonitorKeyboardPower
Win 7 Pro 64bit 27" 2560x1440 S-IPS Logitech G710+ Mechanical OCZ Z850W Main, OCZ Powerstream 520ADJ Slave 
CaseMouseMouse PadAudio
Custom Mountain Mods Extended Ascension Logitech G9x w/Wide Load grip Homemade 16ga 304 Stainless pad, Neoprene backed 32" soundbar w/ wireless subwoofer 
View all
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Peltiers / TEC
Overclock.net › Forums › Cooling › Peltiers / TEC › TEC Liquid Chiller suggestions.