Originally Posted by wrigleyvillain
Yes this particular matte on these PLS screens is a nice semi-gloss and is the "non-agressive AG" being talked about. In short, this matte rocks.
Nice going. How hard was it? Use a particular tool to help? Leave any scratches on the bezel?
As for your question re. calibrator no I do not think possible.
First I removed the 4 screws on the bottom, then I used a expired credit card to slip in between the clips and pop the bezel out. No scratches or anything, but at first I tried a white credit card and it left a white mark that you could rub off, but then i tried a black one and it was fine. I used 3M double sided tape to fix the panel rock, long strips instead of little pieces to try to give it the best uniformity. I left the protective covering on the sticky tape because obviously you don't want the panel to be stuck down to the sticky tape.
Now I'm just trying to find a better power supply with a longer cord. I have some really solid dell & sony power supplys, but they're all 15v
I ordered from hulustar and while I got a mostly good monitor, I would not recommend him, I got the wrong DVI cable with my monitor & the power supply wire had a cut in it, all he could say was "we send photo to manufactor" and doesn't seem to communicate with me at all.
I emailed square trade and they say that they will warranty it for $49 for 3 years, i certainly think its worth it, anyone dealt with square trade at all before?Edited by supaboom - 5/8/13 at 4:59pm