Overclock.net › Forums › Case Mods & Cases › Computer Cases › Radiators in the 800D
New Posts  All Forums:Forum Nav:

Radiators in the 800D - Page 4

post #31 of 51
II edited my previous post with even more details if you want to take a look at the Spoilers.

With the Radiator mounted vertically, there is no danger that the middle plate divider will be sagging. The radiator will support it.

To place the radiator vertically, you will have to remove completly the bottom of the case, you'll have to pop all bottom rivets out and place the radiator and replace the bottom with new rivet. Takes around an hour to do so. I also put an old sox around the radiator not to scratch it.

But to answer your question, I sill added a support for the middle plate divider. I used a Front 5,25" bay cover and cut it to the proper lenght. I also painted it to match my rig color theme.

As shown here, you can enlarge the picture.

Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #32 of 51
Thread Starter 
Quote:
Originally Posted by KaRLiToS View Post

II edited my previous post with even more details if you want to take a look at the Spoilers.

With the Radiator mounted vertically, there is no danger that the middle plate divider will be sagging. The radiator will support it.

To place the radiator vertically, you will have to remove completly the bottom of the case, you'll have to pop all bottom rivets out and place the radiator and replace the bottom with new rivet. Takes around an hour to do so. I also put an old sox around the radiator not to scratch it.

But to answer your question, I sill added a support for the middle plate divider. I used a Front 5,25" bay cover and cut it to the proper lenght. I also painted it to match my rig color theme.

As shown here, you can enlarge the picture.


Nice looking rig smile.gif. Thanks for the advice. I do not think that I am going to mount it vertically, i will stick with mounting it on the floor. I will try your method of supporting the mid plate as I need to order some new 5.25" bay covers anyway.
 
Personal rig
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 4670K Asus Maximum VI Impact Sapphire AMD Radeon R9 290X Graphics Card  Corsair Dominator Platinum 16GB (2x8GB) DDR3 16... 
Hard DriveOptical DriveCoolingCooling
Samsung 840 EVO 120GB 2.5 inch Basic SATA Solid... What I am currently using EK-FC R9-290X - Nickel (original CSQ) EK-FC R9-290X Backplate - Black 
CoolingCoolingOSCase
4x EK-PSC Fitting 13mm - G1/4 Black Bitspower Dual G1/4" Matte Black Triple Rotary ... What I am currently using Bitfenix Prodigy 
MouseMouse PadAudioOther
What I am currently using What I am currently using What I am currently using Lutro0 Customs Helios sleeving plus tools 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k MSI Z77a-g45 KFA2 GTX 570 Corsair Vengeance 
Hard DriveCoolingOSKeyboard
Samsung Custom watercool Windows 8 Filco Majestouch Ninja 2 with Chery MX Blues an... 
CaseMouse
Corsair Obisidian 800D Roccat Kova [+] 
  hide details  
Reply
 
Personal rig
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 4670K Asus Maximum VI Impact Sapphire AMD Radeon R9 290X Graphics Card  Corsair Dominator Platinum 16GB (2x8GB) DDR3 16... 
Hard DriveOptical DriveCoolingCooling
Samsung 840 EVO 120GB 2.5 inch Basic SATA Solid... What I am currently using EK-FC R9-290X - Nickel (original CSQ) EK-FC R9-290X Backplate - Black 
CoolingCoolingOSCase
4x EK-PSC Fitting 13mm - G1/4 Black Bitspower Dual G1/4" Matte Black Triple Rotary ... What I am currently using Bitfenix Prodigy 
MouseMouse PadAudioOther
What I am currently using What I am currently using What I am currently using Lutro0 Customs Helios sleeving plus tools 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k MSI Z77a-g45 KFA2 GTX 570 Corsair Vengeance 
Hard DriveCoolingOSKeyboard
Samsung Custom watercool Windows 8 Filco Majestouch Ninja 2 with Chery MX Blues an... 
CaseMouse
Corsair Obisidian 800D Roccat Kova [+] 
  hide details  
Reply
post #33 of 51
Quote:
Originally Posted by jd2195 View Post

Nice looking rig smile.gif. Thanks for the advice. I do not think that I am going to mount it vertically, i will stick with mounting it on the floor. I will try your method of supporting the mid plate as I need to order some new 5.25" bay covers anyway.

Anything you can find to support it, you just need the perfect lenght of any stick. At first I used the plastic rail for the bottom HDD cage to support the midplate.

This was my first 800D mod. Radiator was mounted horizontally.

Enlarge for better view.
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #34 of 51
Thread Starter 
Quote:
Originally Posted by KaRLiToS View Post

Anything you can find to support it, you just need the perfect lenght of any stick. At first I used the plastic rail for the bottom HDD cage to support the midplate.

This was my first 800D mod. Radiator was mounted horizontally.

Enlarge for better view.

Looks pretty similar to what I am trying to do. What psu and rad have you got down there just so I can get an idea of sizing?
 
Personal rig
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 4670K Asus Maximum VI Impact Sapphire AMD Radeon R9 290X Graphics Card  Corsair Dominator Platinum 16GB (2x8GB) DDR3 16... 
Hard DriveOptical DriveCoolingCooling
Samsung 840 EVO 120GB 2.5 inch Basic SATA Solid... What I am currently using EK-FC R9-290X - Nickel (original CSQ) EK-FC R9-290X Backplate - Black 
CoolingCoolingOSCase
4x EK-PSC Fitting 13mm - G1/4 Black Bitspower Dual G1/4" Matte Black Triple Rotary ... What I am currently using Bitfenix Prodigy 
MouseMouse PadAudioOther
What I am currently using What I am currently using What I am currently using Lutro0 Customs Helios sleeving plus tools 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k MSI Z77a-g45 KFA2 GTX 570 Corsair Vengeance 
Hard DriveCoolingOSKeyboard
Samsung Custom watercool Windows 8 Filco Majestouch Ninja 2 with Chery MX Blues an... 
CaseMouse
Corsair Obisidian 800D Roccat Kova [+] 
  hide details  
Reply
 
Personal rig
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 4670K Asus Maximum VI Impact Sapphire AMD Radeon R9 290X Graphics Card  Corsair Dominator Platinum 16GB (2x8GB) DDR3 16... 
Hard DriveOptical DriveCoolingCooling
Samsung 840 EVO 120GB 2.5 inch Basic SATA Solid... What I am currently using EK-FC R9-290X - Nickel (original CSQ) EK-FC R9-290X Backplate - Black 
CoolingCoolingOSCase
4x EK-PSC Fitting 13mm - G1/4 Black Bitspower Dual G1/4" Matte Black Triple Rotary ... What I am currently using Bitfenix Prodigy 
MouseMouse PadAudioOther
What I am currently using What I am currently using What I am currently using Lutro0 Customs Helios sleeving plus tools 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k MSI Z77a-g45 KFA2 GTX 570 Corsair Vengeance 
Hard DriveCoolingOSKeyboard
Samsung Custom watercool Windows 8 Filco Majestouch Ninja 2 with Chery MX Blues an... 
CaseMouse
Corsair Obisidian 800D Roccat Kova [+] 
  hide details  
Reply
post #35 of 51
Quote:
Originally Posted by jd2195 View Post

Looks pretty similar to what I am trying to do. What psu and rad have you got down there just so I can get an idea of sizing?

Radiator is discontinued , its a Feser X-Changer 240, but any thick Rad will fit (60mm thick)

And the Power Supply was an Enermax Revolution 950W. Any Enermax or Lepa will fit as far as I know, maybe someone can help you with other brands.
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #36 of 51
Thread Starter 
Ok thanks.
 
Personal rig
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 4670K Asus Maximum VI Impact Sapphire AMD Radeon R9 290X Graphics Card  Corsair Dominator Platinum 16GB (2x8GB) DDR3 16... 
Hard DriveOptical DriveCoolingCooling
Samsung 840 EVO 120GB 2.5 inch Basic SATA Solid... What I am currently using EK-FC R9-290X - Nickel (original CSQ) EK-FC R9-290X Backplate - Black 
CoolingCoolingOSCase
4x EK-PSC Fitting 13mm - G1/4 Black Bitspower Dual G1/4" Matte Black Triple Rotary ... What I am currently using Bitfenix Prodigy 
MouseMouse PadAudioOther
What I am currently using What I am currently using What I am currently using Lutro0 Customs Helios sleeving plus tools 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k MSI Z77a-g45 KFA2 GTX 570 Corsair Vengeance 
Hard DriveCoolingOSKeyboard
Samsung Custom watercool Windows 8 Filco Majestouch Ninja 2 with Chery MX Blues an... 
CaseMouse
Corsair Obisidian 800D Roccat Kova [+] 
  hide details  
Reply
 
Personal rig
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 4670K Asus Maximum VI Impact Sapphire AMD Radeon R9 290X Graphics Card  Corsair Dominator Platinum 16GB (2x8GB) DDR3 16... 
Hard DriveOptical DriveCoolingCooling
Samsung 840 EVO 120GB 2.5 inch Basic SATA Solid... What I am currently using EK-FC R9-290X - Nickel (original CSQ) EK-FC R9-290X Backplate - Black 
CoolingCoolingOSCase
4x EK-PSC Fitting 13mm - G1/4 Black Bitspower Dual G1/4" Matte Black Triple Rotary ... What I am currently using Bitfenix Prodigy 
MouseMouse PadAudioOther
What I am currently using What I am currently using What I am currently using Lutro0 Customs Helios sleeving plus tools 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k MSI Z77a-g45 KFA2 GTX 570 Corsair Vengeance 
Hard DriveCoolingOSKeyboard
Samsung Custom watercool Windows 8 Filco Majestouch Ninja 2 with Chery MX Blues an... 
CaseMouse
Corsair Obisidian 800D Roccat Kova [+] 
  hide details  
Reply
post #37 of 51
Thread Starter 
What is thickess rad you can fit in the top of an 800D?
 
Personal rig
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 4670K Asus Maximum VI Impact Sapphire AMD Radeon R9 290X Graphics Card  Corsair Dominator Platinum 16GB (2x8GB) DDR3 16... 
Hard DriveOptical DriveCoolingCooling
Samsung 840 EVO 120GB 2.5 inch Basic SATA Solid... What I am currently using EK-FC R9-290X - Nickel (original CSQ) EK-FC R9-290X Backplate - Black 
CoolingCoolingOSCase
4x EK-PSC Fitting 13mm - G1/4 Black Bitspower Dual G1/4" Matte Black Triple Rotary ... What I am currently using Bitfenix Prodigy 
MouseMouse PadAudioOther
What I am currently using What I am currently using What I am currently using Lutro0 Customs Helios sleeving plus tools 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k MSI Z77a-g45 KFA2 GTX 570 Corsair Vengeance 
Hard DriveCoolingOSKeyboard
Samsung Custom watercool Windows 8 Filco Majestouch Ninja 2 with Chery MX Blues an... 
CaseMouse
Corsair Obisidian 800D Roccat Kova [+] 
  hide details  
Reply
 
Personal rig
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 4670K Asus Maximum VI Impact Sapphire AMD Radeon R9 290X Graphics Card  Corsair Dominator Platinum 16GB (2x8GB) DDR3 16... 
Hard DriveOptical DriveCoolingCooling
Samsung 840 EVO 120GB 2.5 inch Basic SATA Solid... What I am currently using EK-FC R9-290X - Nickel (original CSQ) EK-FC R9-290X Backplate - Black 
CoolingCoolingOSCase
4x EK-PSC Fitting 13mm - G1/4 Black Bitspower Dual G1/4" Matte Black Triple Rotary ... What I am currently using Bitfenix Prodigy 
MouseMouse PadAudioOther
What I am currently using What I am currently using What I am currently using Lutro0 Customs Helios sleeving plus tools 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k MSI Z77a-g45 KFA2 GTX 570 Corsair Vengeance 
Hard DriveCoolingOSKeyboard
Samsung Custom watercool Windows 8 Filco Majestouch Ninja 2 with Chery MX Blues an... 
CaseMouse
Corsair Obisidian 800D Roccat Kova [+] 
  hide details  
Reply
post #38 of 51
Loving the information in this thread perfect for me as I am planning to add a 240 rad to the bottom of my case, as well as add a thicker/long rad to the top.
I have a 700d so I think the bottom bay removal will be slightly different but equally as simple.
I like the idea of mounting the rad vertically, but im not to keen on the idea of cutting holes in the back side panel to allow the hot air to exhaust. Mounting horizontally would be more simple, but I just dont know where the hot air would go. I was thinking of pushing the air out the bottom and putting a 120mm fan hole in the front panel to allow it to draw air in.
Im not sure I can sacrifice two drive bays for a 480 at the top, given that I have a bay res (I could give that up if I need to, I do have some normal tops for my D5.
Main Rig
(15 items)
 
 
Living Room PC
(12 items)
 
CPUMotherboardGraphicsRAM
i7 4790K @ 4800 G1 Sniper 5 GTX 780Ti SLI @ 1300MHz 16GB DDR3 @ 2200 9-11-11-31 1T 
Hard DriveHard DriveOptical DriveCooling
2TB Hitatchi HDD 1TB Samsung 840 EVO samsung DVDRW DL Custom Water loop 
OSMonitorPowerCase
Win7 64 LG 27" 1080p EVGA 1000P Corsair 700D 
CPUMotherboardGraphicsRAM
i7 3770K @ 5000 Z77X-UP7 GTX770 2x4GB DDR3 7-8-7-21 1T 
Hard DriveHard DriveOptical DriveCooling
WD Velociraptor 250GB 840Evo DVD Burner Coolermaster hyper 212+ 
OSPowerCase
Win 7 x64 OCZ GameXtreme 700W  Dimastech mini v1 
CPUMotherboardGraphicsRAM
i7 2600 Asus P8Z77-V Pro GTX580 8GB DDR3 @ 1600 9-9-9 1T 
Hard DriveHard DriveOptical DriveCooling
2TB hitachi 500GB 850EVO Blue Ray Hyper 212+ 
OSMonitorPowerCase
Win7 64` 42" Panasonic Plasma TX650 Tuniq Tower 3 
  hide details  
Reply
Main Rig
(15 items)
 
 
Living Room PC
(12 items)
 
CPUMotherboardGraphicsRAM
i7 4790K @ 4800 G1 Sniper 5 GTX 780Ti SLI @ 1300MHz 16GB DDR3 @ 2200 9-11-11-31 1T 
Hard DriveHard DriveOptical DriveCooling
2TB Hitatchi HDD 1TB Samsung 840 EVO samsung DVDRW DL Custom Water loop 
OSMonitorPowerCase
Win7 64 LG 27" 1080p EVGA 1000P Corsair 700D 
CPUMotherboardGraphicsRAM
i7 3770K @ 5000 Z77X-UP7 GTX770 2x4GB DDR3 7-8-7-21 1T 
Hard DriveHard DriveOptical DriveCooling
WD Velociraptor 250GB 840Evo DVD Burner Coolermaster hyper 212+ 
OSPowerCase
Win 7 x64 OCZ GameXtreme 700W  Dimastech mini v1 
CPUMotherboardGraphicsRAM
i7 2600 Asus P8Z77-V Pro GTX580 8GB DDR3 @ 1600 9-9-9 1T 
Hard DriveHard DriveOptical DriveCooling
2TB hitachi 500GB 850EVO Blue Ray Hyper 212+ 
OSMonitorPowerCase
Win7 64` 42" Panasonic Plasma TX650 Tuniq Tower 3 
  hide details  
Reply
post #39 of 51
Quote:
Originally Posted by jd2195 View Post

What is thickess rad you can fit in the top of an 800D?

60mm with Push or Pull configurations, I added a shroud on top of the case to add more space for a push/pull configuration 60mm radiator.

You may find more information on thick rad with push/pull configurations without modding, here.
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #40 of 51
Thread Starter 
Quote:
Originally Posted by KaRLiToS View Post

60mm with Push or Pull configurations, I added a shroud on top of the case to add more space for a push/pull configuration 60mm radiator.

You may find more information on thick rad with push/pull configurations without modding, here.
Thanks I will only be running my fans in pull. Do not like the look of push pull.
 
Personal rig
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 4670K Asus Maximum VI Impact Sapphire AMD Radeon R9 290X Graphics Card  Corsair Dominator Platinum 16GB (2x8GB) DDR3 16... 
Hard DriveOptical DriveCoolingCooling
Samsung 840 EVO 120GB 2.5 inch Basic SATA Solid... What I am currently using EK-FC R9-290X - Nickel (original CSQ) EK-FC R9-290X Backplate - Black 
CoolingCoolingOSCase
4x EK-PSC Fitting 13mm - G1/4 Black Bitspower Dual G1/4" Matte Black Triple Rotary ... What I am currently using Bitfenix Prodigy 
MouseMouse PadAudioOther
What I am currently using What I am currently using What I am currently using Lutro0 Customs Helios sleeving plus tools 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k MSI Z77a-g45 KFA2 GTX 570 Corsair Vengeance 
Hard DriveCoolingOSKeyboard
Samsung Custom watercool Windows 8 Filco Majestouch Ninja 2 with Chery MX Blues an... 
CaseMouse
Corsair Obisidian 800D Roccat Kova [+] 
  hide details  
Reply
 
Personal rig
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 4670K Asus Maximum VI Impact Sapphire AMD Radeon R9 290X Graphics Card  Corsair Dominator Platinum 16GB (2x8GB) DDR3 16... 
Hard DriveOptical DriveCoolingCooling
Samsung 840 EVO 120GB 2.5 inch Basic SATA Solid... What I am currently using EK-FC R9-290X - Nickel (original CSQ) EK-FC R9-290X Backplate - Black 
CoolingCoolingOSCase
4x EK-PSC Fitting 13mm - G1/4 Black Bitspower Dual G1/4" Matte Black Triple Rotary ... What I am currently using Bitfenix Prodigy 
MouseMouse PadAudioOther
What I am currently using What I am currently using What I am currently using Lutro0 Customs Helios sleeving plus tools 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k MSI Z77a-g45 KFA2 GTX 570 Corsair Vengeance 
Hard DriveCoolingOSKeyboard
Samsung Custom watercool Windows 8 Filco Majestouch Ninja 2 with Chery MX Blues an... 
CaseMouse
Corsair Obisidian 800D Roccat Kova [+] 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › Radiators in the 800D