Overclock.net › Forums › Cooling › Water Cooling › Are these temps okay?
New Posts  All Forums:Forum Nav:

Are these temps okay? - Page 2

post #11 of 12
you have the same temps i had with my 3930K + Raystorm
around 74 OC at 4600Mhz with 1.35V

dont forget its a 6 cores CPU, you will never get same temp as 2500K

and dot methode for a 2011 6 core is not the best, me, the best methode was +, or line plus 2 small dot on each side with MX-4

and finnally i change the raystorm for a swiftech apogee HD for a gain between 3 and 5C

but your temp are fines

and by the way, dont look to much H100 temp on a 6 core, i build 4 diffent 2011 with 3930k or 3960k
all with H100 and never at 1.38v, you will have better temp than yours
with an ambient of 25c
post #12 of 12
Thread Starter 
UPDATE: Just rebuilt my loop that fixed the kink + uses a bit less tubing. Also mounted the cpu using mx-4 applied using a large + method. Temps seem to have improved a bit. I can lose ~1-2C if I turn my pump up to 4.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Are these temps okay?