Overclock.net › Forums › Cooling › Water Cooling › Bitspower Owners gallery
New Posts  All Forums:Forum Nav:

Bitspower Owners gallery - Page 60

post #591 of 812
Quote:
Originally Posted by ToxM82 View Post

I thought the same at first but they are in fact the same. I did mount the third block I had the Deluxe I before they released the II and got lucky was able to return the MB and get the II 👍🏼


Thank you for the help!thumbsupsmiley.png
now i can place my order without worrying. thumb.gif


EDIT: Does the MOBO block come with thermal grease/paste? or do I have to get them separately?
post #592 of 812
Quote:
Originally Posted by Willp1108 View Post

Thank you for the help!thumbsupsmiley.png
now i can place my order without worrying. thumb.gif


EDIT: Does the MOBO block come with thermal grease/paste? or do I have to get them separately?

Get that separately, it comes with thermal pads only. thumb.gif
post #593 of 812
Amazing looks on the new Bitspower D5 pump tops. thumbsupsmiley.png


post #594 of 812
Hi all, I've just purchased the full acrylic Bitspower Z-Multi 40 res. and am planning on sanding/polishing the ends of the reservoir (as they come with a frosted finish). I'm curious if anyone else has tried doing this before and if that's also the easiest way to get rid of the logo on the end cap? I have to say, it's a tidy little res., though!
post #595 of 812
Quote:
Originally Posted by JCArch View Post

Hi all, I've just purchased the full acrylic Bitspower Z-Multi 40 res. and am planning on sanding/polishing the ends of the reservoir (as they come with a frosted finish). I'm curious if anyone else has tried doing this before and if that's also the easiest way to get rid of the logo on the end cap? I have to say, it's a tidy little res., though!

Same way you would polished frosted acrylic. Here is the Link

TCO
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #596 of 812
Quote:
Originally Posted by TheCautiousOne View Post

Same way you would polished frosted acrylic. Here is the Link

TCO

Perfect, thanks TCO! Yeah, I referenced that when polishing my EK X-TOP, just wanted to see if that's the easiest way to get rid of the BP logo. For some reason it irks me, not to mention I'm using all EK components in my new build, so I'm trying to sneak an imposter in there thumb.gif
post #597 of 812
Quote:
Originally Posted by JCArch View Post

Perfect, thanks TCO! Yeah, I referenced that when polishing my EK X-TOP, just wanted to see if that's the easiest way to get rid of the BP logo. For some reason it irks me, not to mention I'm using all EK components in my new build, so I'm trying to sneak an imposter in there thumb.gif

Yea... The process is the same, Using a 400 Grit, or Low grit to remove the layer of acrylic you want off... then coming back over it with finer grits before you polish the minor scratches out. thumb.gif

TCO
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #598 of 812
All bitspower WB/fittings. First water-cooled build; already addicted and have a new build in progress. Specs at bottom; let me know what you think







  • Important hardware
    • Processor: Intel Core i7-5960X
    • Motherboard: MSI X99A GodLike Gaming Carbon
    • PSU: CORSAIR AX1500i
    • SSD1: SAMSUNG 950 PRO M.2 512GB PCI-Express 3.0 x4 Internal Solid State Drive
    • SSD2: SAMSUNG 850 PRO 2.5" 512GB SATA III 3-D Vertical Internal Solid State Drive
    • SSD3: SAMSUNG 850 PRO 2.5" 512GB SATA III 3-D Vertical Internal Solid State Drive
    • RAM: CORSAIR Dominator Platinum 64GB (8 x 8GB) 288-Pin DDR4 SDRAM DDR4 2800 (PC4 22400)
    • GPU: 2x SLI MSI GeForce GTX 980 Ti GAMING 6G
  • Case
    • InWin 909 Silver **VERY MODIFIED
    • Lighting: Mixture of cold cathode/RGB LEDs (PC controlled)
    • Cables: CaseMod AXi set
  • Custom Cooling
    • Motherboard WB: Bitspower MSI X99A GODLIKE GAMING Nickel Plated Full-Covered-Block (Clear)
    • GPU WB: 2x Bitspower VG-NGTX980TIMG Acrylic (Clear)
    • RAM WB: Bitspower RAM Module Set
    • Rear Radiator: EKWB 360MM XE
    • Front Radiator: EKWB 280MM CE
    • Fans Rear/Mid: 4x Noctua NF-F12 iPPC 3000RPM PWM fans
    • Fans Front/bottom: 4x Noctua NF-A14 iPPC 3000RPM PWM fans
    • Pump: Swiftech D5 PWM with Bitspower mod top
    • Resevoir: FrozenQ dual bay helix (leaked on delivery FYI **after I assembled the whole thing mad.gif)
    • Fittings: Lots of Bitspower black sparkle enhanced multi-link
    • Tubing: Labratory grade 12mm chrome plated copper tube
post #599 of 812
Quote:
Originally Posted by SIRobotics View Post

All bitspower WB/fittings. First water-cooled build; already addicted and have a new build in progress. Specs at bottom; let me know what you think
Warning: Spoiler! (Click to show)






  • Important hardware
    • Processor: Intel Core i7-5960X
    • Motherboard: MSI X99A GodLike Gaming Carbon
    • PSU: CORSAIR AX1500i
    • SSD1: SAMSUNG 950 PRO M.2 512GB PCI-Express 3.0 x4 Internal Solid State Drive
    • SSD2: SAMSUNG 850 PRO 2.5" 512GB SATA III 3-D Vertical Internal Solid State Drive
    • SSD3: SAMSUNG 850 PRO 2.5" 512GB SATA III 3-D Vertical Internal Solid State Drive
    • RAM: CORSAIR Dominator Platinum 64GB (8 x 8GB) 288-Pin DDR4 SDRAM DDR4 2800 (PC4 22400)
    • GPU: 2x SLI MSI GeForce GTX 980 Ti GAMING 6G
  • Case
    • InWin 909 Silver **VERY MODIFIED
    • Lighting: Mixture of cold cathode/RGB LEDs (PC controlled)
    • Cables: CaseMod AXi set
  • Custom Cooling
    • Motherboard WB: Bitspower MSI X99A GODLIKE GAMING Nickel Plated Full-Covered-Block (Clear)
    • GPU WB: 2x Bitspower VG-NGTX980TIMG Acrylic (Clear)
    • RAM WB: Bitspower RAM Module Set
    • Rear Radiator: EKWB 360MM XE
    • Front Radiator: EKWB 280MM CE
    • Fans Rear/Mid: 4x Noctua NF-F12 iPPC 3000RPM PWM fans
    • Fans Front/bottom: 4x Noctua NF-A14 iPPC 3000RPM PWM fans
    • Pump: Swiftech D5 PWM with Bitspower mod top
    • Resevoir: FrozenQ dual bay helix (leaked on delivery FYI **after I assembled the whole thing mad.gif)
    • Fittings: Lots of Bitspower black sparkle enhanced multi-link
    • Tubing: Labratory grade 12mm chrome plated copper tube

Tell me about it! I started my first water-cooled build early last year and am currently on my third one! Looks great though. For how much you have going on in there, you cleaned it up well!
post #600 of 812
Quote:
Originally Posted by fast_fate View Post

Warning: Spoiler! (Click to show)
I have 16mm EML to test also, but no Bp tube.
Take your pic of EKHD, EK PETG, Barrow Acrylic or Mayhems Glass tubing and I'll make that the next photo to post here thumb.gif

The glass tube review won't be updated, BUT....

You can look forward to a Hard-Line fitting round-up and reviews for each of the 25 fittings currently in hand.
Each review will have Pressure Tests on all the tube types I currently have available.


Quote:
Originally Posted by fast_fate View Post

EDIT: @Costas any chance you have a short length of 16mm Bp CL tube you could send my way thumb.gif
Also chasing another EML14 - was only sent 1 rolleyes.gif

This time 'round I'm not going for maximum pressure - it was just too painful to do with the glass tubing as you never quite know at what PSI either end may "pop" off.

This time we have chosen:
5PSI as a minimum pass.
10 PSI as very good
15 PSI Excellent.

So for the reviews/comparisons I'm attempting 15 PSI straight off for each tube type on each fitting.(between 15 PSI & 16 PSI).
If it holds for 2 minutes, take photo and move on.
if movement noticed - try fitting the tube again.
If pops off either end, OR can hold pressure with movement of the tube then refit and drop down to a 10 PSI attempt.

so not really testing above 15.5 PSI as a general rule this time around.

Warning: Spoiler! (Click to show)
BUT just for you EML16 holding some bigger pressure with 2 tube types thumb.gif




Hey fast_fate, is the hard line fitting shoot-out still moving forward?

Just curious... and hopeful thumbsupsmiley.png
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Bitspower Owners gallery