Overclock.net › Forums › Intel › Intel CPUs › So my CPU blue screened after a two and a half hour P95 Blend test
New Posts  All Forums:Forum Nav:

So my CPU blue screened after a two and a half hour P95 Blend test - Page 4

post #31 of 36
Quote:
Originally Posted by GlassToTheArson View Post

Quote:
Originally Posted by RavageTheEarth View Post

Definetly use a multimeter and until you do use one don't overclock past 1.35v. On my last AsRock board the voltage was .1v higher than I was feeding it and I didn't realize that so I was actually feeding my chip 1.55v for a couple of days. Luckily I randomly decided to check the voltage points and almost died of shock when I seen 1.55v. If you are going to be using offset on that board I would use a Level 5 Load Line Calibration because it will minimize vdroop and too high of a voltage being fed to your chip without your knowledge. Just make sure you back down your overclock and just add a .005v offset just so you can see what your voltage is under load because a higher LLC causes more voltage to be fed to your chip so if you use the same offset you were using before it will skyrocket the voltage even though all you changed was the LLC.

Hope that made sense. Beyond exhausted right now.

Just stay patient and you will start to understand all of this stuff.

I really appreciate all the help you guys are giving.

Alright so my core voltage is currently at 1.424v

You are already pretty high there. >.> Again, this is why I use manual voltage. That is too high for me for 4.5. Though try to keep it under 1.45
 
Gsvlip Dudyrm
(15 items)
 
Oda'maksv
(9 items)
 
CPUMotherboardGraphicsRAM
3770k @ 4.5 1.312 load Zotac Z77 ITX Wifi GTX 1070 Gaming 2126/2249 w/ Hybrid cooler TridentX 16GB 2400MHz 
Hard DriveHard DriveCoolingCooling
Samsung 850 Pro 1TB Seagate 2TB H105 EVGA Hybrid GPU cooler 
OSMonitorKeyboardPower
Windows 10 Asus MG279Q - 24" 144Hz 1080p Filco Majestic II w/ Cherry Reds Seasonic X 760W 
CaseMouseMouse PadAudio
Bitfelix Prodigy Logitech G400 Razer Goliath AKG A701 
AudioAudio
JDS Labs Objective 2 JDS Labs ODAC 
CPUMotherboardGraphicsRAM
Core i5 750 3.99 (190x21) 1.376v Load ASUS P7P55d-E Pro GTX 670 FTW <- Poor overclocker :( 8GB (4x2GB) G.Skill DDR3 1600 
Hard DriveHard DriveOptical DriveOS
Samsung 830 Evo 128GB 2x 2TB  Some DVD drive OSX 10.10.4 
MonitorPowerCaseMouse
Asus 1080P Crap TX 750 HAF 922 G400s 
Mouse PadOther
Apple Keyboard Xbox One controler 
CPURAMHard DriveHard Drive
C2D 2,26GHz under volted @ .978v 8GB  Crucial M4 64GB SSD 500GB Scorpio Black 
OSMonitorKeyboardMouse
OS X 10.0 1280x800 Built-in Trackpad 
Audio
Built-in 
  hide details  
Reply
 
Gsvlip Dudyrm
(15 items)
 
Oda'maksv
(9 items)
 
CPUMotherboardGraphicsRAM
3770k @ 4.5 1.312 load Zotac Z77 ITX Wifi GTX 1070 Gaming 2126/2249 w/ Hybrid cooler TridentX 16GB 2400MHz 
Hard DriveHard DriveCoolingCooling
Samsung 850 Pro 1TB Seagate 2TB H105 EVGA Hybrid GPU cooler 
OSMonitorKeyboardPower
Windows 10 Asus MG279Q - 24" 144Hz 1080p Filco Majestic II w/ Cherry Reds Seasonic X 760W 
CaseMouseMouse PadAudio
Bitfelix Prodigy Logitech G400 Razer Goliath AKG A701 
AudioAudio
JDS Labs Objective 2 JDS Labs ODAC 
CPUMotherboardGraphicsRAM
Core i5 750 3.99 (190x21) 1.376v Load ASUS P7P55d-E Pro GTX 670 FTW <- Poor overclocker :( 8GB (4x2GB) G.Skill DDR3 1600 
Hard DriveHard DriveOptical DriveOS
Samsung 830 Evo 128GB 2x 2TB  Some DVD drive OSX 10.10.4 
MonitorPowerCaseMouse
Asus 1080P Crap TX 750 HAF 922 G400s 
Mouse PadOther
Apple Keyboard Xbox One controler 
CPURAMHard DriveHard Drive
C2D 2,26GHz under volted @ .978v 8GB  Crucial M4 64GB SSD 500GB Scorpio Black 
OSMonitorKeyboardMouse
OS X 10.0 1280x800 Built-in Trackpad 
Audio
Built-in 
  hide details  
Reply
post #32 of 36
Thread Starter 
Quote:
Originally Posted by Lord Xeb View Post

Bear in mind that you need to be careful using a multimeter... it is easy to short a board... or chip.. or both. I have done both doh.gif

Oh hell, I didn't know I could short this thing out! Dear god if I ruin this CPU, I'm not going to have anything!

I also got the voltage down to 1.384v under load
מחשב
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5-6600k @4.5GHz Asus Sabertooth Z170 Mark 1 GIGABYTE GTX 980 Ti G1 Avexir Core Series 8GB DDR4 2400 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 256GB SSD Western Digital Black 3TB HDD Cooler Master Hyper 212 Evo Windows 7 Home Premium 
MonitorKeyboardPowerCase
Vizio E600i 60" LED TV Corsair K70 Rosewill CAPSTONE 750w Gold Rated PSU Cooler Master Storm Trooper 
MouseMouse PadAudio
Logitech G500 SteelSeries QCK+ Astro A40 
  hide details  
Reply
מחשב
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5-6600k @4.5GHz Asus Sabertooth Z170 Mark 1 GIGABYTE GTX 980 Ti G1 Avexir Core Series 8GB DDR4 2400 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 256GB SSD Western Digital Black 3TB HDD Cooler Master Hyper 212 Evo Windows 7 Home Premium 
MonitorKeyboardPowerCase
Vizio E600i 60" LED TV Corsair K70 Rosewill CAPSTONE 750w Gold Rated PSU Cooler Master Storm Trooper 
MouseMouse PadAudio
Logitech G500 SteelSeries QCK+ Astro A40 
  hide details  
Reply
post #33 of 36
Quote:
Originally Posted by Lord Xeb View Post

Bear in mind that you need to be careful using a multimeter... it is easy to short a board... or chip.. or both. I have done both doh.gif

Yes most definetly be careful. Patience and care go a long way with computers. It's very simple to do, but if you aren't focused on the task at hand it could easily go wrong. I've almost shorted the board once. Luckily it just turned off and then back on again. Now on my new MVE it comes with connectors for a multimeter. Thank god!!! Now I can just set it and forget it!
post #34 of 36
Thread Starter 
Voltage is jumping between 1.344 and 1.370
מחשב
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5-6600k @4.5GHz Asus Sabertooth Z170 Mark 1 GIGABYTE GTX 980 Ti G1 Avexir Core Series 8GB DDR4 2400 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 256GB SSD Western Digital Black 3TB HDD Cooler Master Hyper 212 Evo Windows 7 Home Premium 
MonitorKeyboardPowerCase
Vizio E600i 60" LED TV Corsair K70 Rosewill CAPSTONE 750w Gold Rated PSU Cooler Master Storm Trooper 
MouseMouse PadAudio
Logitech G500 SteelSeries QCK+ Astro A40 
  hide details  
Reply
מחשב
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5-6600k @4.5GHz Asus Sabertooth Z170 Mark 1 GIGABYTE GTX 980 Ti G1 Avexir Core Series 8GB DDR4 2400 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 256GB SSD Western Digital Black 3TB HDD Cooler Master Hyper 212 Evo Windows 7 Home Premium 
MonitorKeyboardPowerCase
Vizio E600i 60" LED TV Corsair K70 Rosewill CAPSTONE 750w Gold Rated PSU Cooler Master Storm Trooper 
MouseMouse PadAudio
Logitech G500 SteelSeries QCK+ Astro A40 
  hide details  
Reply
post #35 of 36
Quote:
Originally Posted by GlassToTheArson View Post

Voltage is jumping between 1.344 and 1.370

What load line calibration are you using? and what offset?
post #36 of 36
Thread Starter 
Quote:
Originally Posted by RavageTheEarth View Post

What load line calibration are you using? and what offset?

Level 5 calibration. Offset is currently set at +0.120v
מחשב
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5-6600k @4.5GHz Asus Sabertooth Z170 Mark 1 GIGABYTE GTX 980 Ti G1 Avexir Core Series 8GB DDR4 2400 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 256GB SSD Western Digital Black 3TB HDD Cooler Master Hyper 212 Evo Windows 7 Home Premium 
MonitorKeyboardPowerCase
Vizio E600i 60" LED TV Corsair K70 Rosewill CAPSTONE 750w Gold Rated PSU Cooler Master Storm Trooper 
MouseMouse PadAudio
Logitech G500 SteelSeries QCK+ Astro A40 
  hide details  
Reply
מחשב
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5-6600k @4.5GHz Asus Sabertooth Z170 Mark 1 GIGABYTE GTX 980 Ti G1 Avexir Core Series 8GB DDR4 2400 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 256GB SSD Western Digital Black 3TB HDD Cooler Master Hyper 212 Evo Windows 7 Home Premium 
MonitorKeyboardPowerCase
Vizio E600i 60" LED TV Corsair K70 Rosewill CAPSTONE 750w Gold Rated PSU Cooler Master Storm Trooper 
MouseMouse PadAudio
Logitech G500 SteelSeries QCK+ Astro A40 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › So my CPU blue screened after a two and a half hour P95 Blend test