Overclock.net › Forums › Intel › Intel CPUs › Trying to Overclock My 2600k
New Posts  All Forums:Forum Nav:

Trying to Overclock My 2600k

post #1 of 22
Thread Starter 
I want to OC my CPU to at least 4.5GHZ or even more if I can. Currently I have opted for an overclock to 4.2GHz using turbo boost since it was simple and straightforward, but I want to OC without turbo boost. I have not touched any other option in the bios and have been running that speed for over a year with no problems.

When I tried to change the turbo boost to 4.6GHz, windows will not load and I am left at a black screen with a single "_" symbol blinking in the top right-hand corner. When I tried turbo boost 4.4GHz, I could get into windows run a program for about 30mins and then get a BSOD. I then tried manually changing the multiplier to 44 and turning interal PLL overvoltage on and I could run a game for about an hour then it would freeze my comp.

From a temperature standpoint, I know I can OC more since under full load for over 4-5 hours my max temp would be 52c. I am new to overclocking and do not understand all the bios options. I have looked at 2600k guides, but most use a very different bios to explain what to do.

I would very much appreciate just a standard starting point. Like features that should always be off when overclocking and which voltages to adjust.

Here is what my bios looks like:

Max ratio: 42
Internal PLL Overvoltage: Enabled
Intel Seed Step Tech: Enabled
Turbo Boost Power Limit: Auto
Additional Turbo Voltage: Auto
Core Current Limit: 150
Host Clock Override(BCLK): 100MHz
Spread Spectrum: Auto
Power Saving Mode: Disabled

CPU Voltage Offset: Auto
DRam Voltage: Auto
CPU PLL Voltage: Auto
VTT Voltage: Auto
PCH Voltage: Auto
VCCSA Voltage: Auto

Advanced CPU Configuration

Hyper Threading: Enabled
Active Processor Cores: All
Hardware Prefetcher: Enabled
Adjacent Cache Line: Enabled
Enhanced Halt State (C1E): Enabled
CPU C3 State Support: Enabled
CPU C6 State Support: Enabled
Package C State Support: Enabled
CPU Thermal Throttling: Enabled
Intel Virtualization Tech: Enabled
No-Execute Memory Protection: Disabled

I could not find anywhere to adjust the vcore voltage. Any help would be greatly appreciated.
Edited by jthurmond3 - 3/28/13 at 9:50am
My Comp
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700k @ 4.7Ghz MSI z170a Gaming M7  EVGA GTX 1080ti FTW3 Corsair Vengeance LPX 16GB (4x4) @3000mhz 
Hard DriveHard DriveCoolingOS
Samsung SM951 256GB Samsung 850 Pro 256GB Cryorig Ultimate R1 Windows 10 
MonitorPowerCase
QNIX QX2710 Evolution ll 1440p 27" NZXT HALE90 V2 850w NZXT Phantom 
  hide details  
Reply
My Comp
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700k @ 4.7Ghz MSI z170a Gaming M7  EVGA GTX 1080ti FTW3 Corsair Vengeance LPX 16GB (4x4) @3000mhz 
Hard DriveHard DriveCoolingOS
Samsung SM951 256GB Samsung 850 Pro 256GB Cryorig Ultimate R1 Windows 10 
MonitorPowerCase
QNIX QX2710 Evolution ll 1440p 27" NZXT HALE90 V2 850w NZXT Phantom 
  hide details  
Reply
post #2 of 22
Quote:
Originally Posted by jthurmond3 View Post

Max ratio: 42
Internal PLL Overvoltage: Enabled

 

You can disable this for now. It's really only needed if Windows won't start at higher multipliers.

 

 

Quote:
Originally Posted by jthurmond3 View Post

CPU Voltage Offset: Auto

 

This is for the CPU's core voltage. If you are only able to use an Offset instead of a Manual voltage, then we will work with this.

 

 

Quote:
Originally Posted by jthurmond3 View Post

DRam Voltage: Auto

 

I recommend manually setting this to match the voltage that your memory is rated for. I mean, my motherboard uses 1.65V if mine's set Auto even though my memory is rated for 1.5V.

 

 

Quote:
Originally Posted by jthurmond3 View Post

Hyper Threading: Enabled

 

Do you know if you need this? Disabling it can make it easier to overclock and it can even provide smoother gaming performance. I've seen some people report "jittery" gaming performance with this enabled.

 

 

Quote:
Originally Posted by jthurmond3 View Post

Intel Virtualization Tech: Enabled

 

This is only needed for Virtual Machines. So if you aren't using any and if you have no plans to use any, then this can be disabled.

 

 

Quote:
Originally Posted by jthurmond3 View Post

No-Execute Memory Protection: Disabled

 

I recommend enabling this because it will enhance your system's security by enabling Windows to use its Data Execution Prevention feature.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #3 of 22
Thread Starter 
Thanks TwoCables for your reply! I will change the setting as you recommended.
Quote:
Originally Posted by TwoCables View Post

Do you know if you need this? Disabling it can make it easier to overclock and it can even provide smoother gaming performance. I've seen some people report "jittery" gaming performance with this enabled.
How would I know if I need hyper threading? I mostly use this computer for gaming, and I usually have a few things running in the background as well (itunes/few web pages/ect). I have read that some games can get up to 10FPS higher with HT on.
Quote:
Originally Posted by TwoCables View Post

This is for the CPU's core voltage. If you are only able to use an Offset instead of a Manual voltage, then we will work with this.
So should I start by setting the ratio to 44 and the offset to +0.005v and see how long i can run? Assuming that is stable would I then move to a 45 ratio and see if windows can boot? If windows does not boot would i need to increase the offset by +0.005v until it can?
My Comp
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700k @ 4.7Ghz MSI z170a Gaming M7  EVGA GTX 1080ti FTW3 Corsair Vengeance LPX 16GB (4x4) @3000mhz 
Hard DriveHard DriveCoolingOS
Samsung SM951 256GB Samsung 850 Pro 256GB Cryorig Ultimate R1 Windows 10 
MonitorPowerCase
QNIX QX2710 Evolution ll 1440p 27" NZXT HALE90 V2 850w NZXT Phantom 
  hide details  
Reply
My Comp
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700k @ 4.7Ghz MSI z170a Gaming M7  EVGA GTX 1080ti FTW3 Corsair Vengeance LPX 16GB (4x4) @3000mhz 
Hard DriveHard DriveCoolingOS
Samsung SM951 256GB Samsung 850 Pro 256GB Cryorig Ultimate R1 Windows 10 
MonitorPowerCase
QNIX QX2710 Evolution ll 1440p 27" NZXT HALE90 V2 850w NZXT Phantom 
  hide details  
Reply
post #4 of 22
Quote:
Originally Posted by jthurmond3 View Post

Thanks TwoCables for your reply! I will change the setting as you recommended.
How would I know if I need hyper threading? I mostly use this computer for gaming, and I usually have a few things running in the background as well (itunes/few web pages/ect). I have read that some games can get up to 10FPS higher with HT on.

 

What games are you playing? The only game I'm aware of that might take advantage of HT on Sandy and Ivy Bridge is Battlefield 3, but I never saw any confirmation of it - just claims.

 

 

Quote:
Originally Posted by jthurmond3 View Post

So should I start by setting the ratio to 44 and the offset to +0.005v and see how long i can run? Assuming that is stable would I then move to a 45 ratio and see if windows can boot? If windows does not boot would i need to increase the offset by +0.005v until it can?

 

Pretty much. If you are able to change to a Manual (or a 'fixed") voltage, then I would recommend using that instead while you overclock. So if you are only able to use an Offset, then this may be the best thing to do.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #5 of 22
Thread Starter 
Alright, I am at 4.5GHz at the moment and just played a game for an hour to test stability. I know its too early to say, but I think all is good. I had to set my offset to +0.010v and my max temp after an hour of full load was 58c. I tried to go up to 4.6GHz, but I get that weird black screen with "_" blinking in the top corner with/without overvoltage and no matter what the offset is. It wont even try to load windows. Is there a safety feature that wont allow me to go over 4.5GHz?

Again, thank you for all of your help.
My Comp
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700k @ 4.7Ghz MSI z170a Gaming M7  EVGA GTX 1080ti FTW3 Corsair Vengeance LPX 16GB (4x4) @3000mhz 
Hard DriveHard DriveCoolingOS
Samsung SM951 256GB Samsung 850 Pro 256GB Cryorig Ultimate R1 Windows 10 
MonitorPowerCase
QNIX QX2710 Evolution ll 1440p 27" NZXT HALE90 V2 850w NZXT Phantom 
  hide details  
Reply
My Comp
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700k @ 4.7Ghz MSI z170a Gaming M7  EVGA GTX 1080ti FTW3 Corsair Vengeance LPX 16GB (4x4) @3000mhz 
Hard DriveHard DriveCoolingOS
Samsung SM951 256GB Samsung 850 Pro 256GB Cryorig Ultimate R1 Windows 10 
MonitorPowerCase
QNIX QX2710 Evolution ll 1440p 27" NZXT HALE90 V2 850w NZXT Phantom 
  hide details  
Reply
post #6 of 22
Quote:
Originally Posted by jthurmond3 View Post

Alright, I am at 4.5GHz at the moment and just played a game for an hour to test stability. I know its too early to say, but I think all is good. I had to set my offset to +0.010v and my max temp after an hour of full load was 58c. I tried to go up to 4.6GHz, but I get that weird black screen with "_" blinking in the top corner with/without overvoltage and no matter what the offset is. It wont even try to load windows. Is there a safety feature that wont allow me to go over 4.5GHz?

Again, thank you for all of your help.

 

Not that I know of.

 

What does CPU-Z say your core voltage is while running Prime95? Run Prime95 for maybe 5-15 seconds to find out.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #7 of 22
Thread Starter 
Quote:
Originally Posted by TwoCables View Post

What does CPU-Z say your core voltage is while running Prime95? Run Prime95 for maybe 5-15 seconds to find out.

vcore was between 1.344-1.352v during prime95
My Comp
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700k @ 4.7Ghz MSI z170a Gaming M7  EVGA GTX 1080ti FTW3 Corsair Vengeance LPX 16GB (4x4) @3000mhz 
Hard DriveHard DriveCoolingOS
Samsung SM951 256GB Samsung 850 Pro 256GB Cryorig Ultimate R1 Windows 10 
MonitorPowerCase
QNIX QX2710 Evolution ll 1440p 27" NZXT HALE90 V2 850w NZXT Phantom 
  hide details  
Reply
My Comp
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700k @ 4.7Ghz MSI z170a Gaming M7  EVGA GTX 1080ti FTW3 Corsair Vengeance LPX 16GB (4x4) @3000mhz 
Hard DriveHard DriveCoolingOS
Samsung SM951 256GB Samsung 850 Pro 256GB Cryorig Ultimate R1 Windows 10 
MonitorPowerCase
QNIX QX2710 Evolution ll 1440p 27" NZXT HALE90 V2 850w NZXT Phantom 
  hide details  
Reply
post #8 of 22
Quote:
Originally Posted by jthurmond3 View Post


vcore was between 1.344-1.352v during prime95

 

Oh hey, that's not bad. How big of an increase to the offset did you try for 4.6 GHz?

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #9 of 22
Thread Starter 
Quote:
Originally Posted by TwoCables View Post

Oh hey, that's not bad. How big of an increase to the offset did you try for 4.6 GHz?

I tired +0.020v. Should I try higher? Since I kept getting that weird screen so I thought it may be something else.
My Comp
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700k @ 4.7Ghz MSI z170a Gaming M7  EVGA GTX 1080ti FTW3 Corsair Vengeance LPX 16GB (4x4) @3000mhz 
Hard DriveHard DriveCoolingOS
Samsung SM951 256GB Samsung 850 Pro 256GB Cryorig Ultimate R1 Windows 10 
MonitorPowerCase
QNIX QX2710 Evolution ll 1440p 27" NZXT HALE90 V2 850w NZXT Phantom 
  hide details  
Reply
My Comp
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700k @ 4.7Ghz MSI z170a Gaming M7  EVGA GTX 1080ti FTW3 Corsair Vengeance LPX 16GB (4x4) @3000mhz 
Hard DriveHard DriveCoolingOS
Samsung SM951 256GB Samsung 850 Pro 256GB Cryorig Ultimate R1 Windows 10 
MonitorPowerCase
QNIX QX2710 Evolution ll 1440p 27" NZXT HALE90 V2 850w NZXT Phantom 
  hide details  
Reply
post #10 of 22
Quote:
Originally Posted by jthurmond3 View Post


I tired +0.020v. Should I try higher? Since I kept getting that weird screen so I thought it may be something else.

 

I think I would go higher. Try up to maybe +0.050. If you make it into Windows from one of these increases, then check the core voltage again in CPU-Z using Prime95 for 100% load.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Trying to Overclock My 2600k