Overclock.net › Forums › AMD › AMD Motherboards › Temperature readout at boot and after S3 state
New Posts  All Forums:Forum Nav:

Temperature readout at boot and after S3 state

post #1 of 2
Thread Starter 
Recently when I boot up my Gigabyte GA970-D3 ver. 1.0 motherboard CPU temps are above normal as read by HWMonitor64 and HWiNFO64. HWMonitor64 reads
AMDFX-6300 Package temp lower than TMPIN2(CPU)or HWiNFO64 CPU 0 temp lower than TEMP 3 (CPU). This sometimes activates the CPU temp alarm at 60 degrees. However after a sleep state, the CPU TMPIN2 and TEMP 3 registers the same reading as Package temp and CPU 0 accordingly. I have reset the bios twice and still follows the same operand.

Regards


post #2 of 2
Thread Starter 
Moved to [Official] Gigabyte GA-990XA/970A-Series Owners' Club & Help Thread

regards smile.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › Temperature readout at boot and after S3 state